Required minimal changes to the code so made sense to implement.
FFT and MDCT tested, the output of both was properly rounded.
Fun fact: the non-power-of-two fixed-point FFT and MDCT are the fastest ever
non-power-of-two fixed-point FFT and MDCT written.
This can replace the power of two integer MDCTs in aac and ac3 if the
MIPS optimizations are ported across.
Unfortunately the ac3 encoder uses a 16-bit fixed point forward transform,
unlike the encoder which uses a 32bit inverse transform, so some modifications
might be required there.
The 3-point FFT is somewhat less accurate than it otherwise could be,
having minor rounding errors with bigger transforms. However, this
could be improved later, and the way its currently written is the way one
would write assembly for it.
Similar rounding errors can also be found throughout the power of two FFTs
as well, though those are more difficult to correct.
Despite this, the integer transforms are more than accurate enough.
Compared to ad-hoc if(printed) ... code this allows the user to disable
it by adjusting the log level
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
To make behavior the same as non-win32 code when the standard error is
redirected. Also restructure the code a bit.
Signed-off-by: Marton Balint <cus@passwd.hu>
Not even FFTW's output is normalized.
This should prevent at least some users from complaining that doing a forward
transform followed by an inverse transform has a mismatching output to the
original input.
This commit adds the necessary code to initialize and use a Vulkan device
within the hwcontext libavutil framework.
Currently direct mapping to VAAPI and DRM frames is functional, and
transfers to CUDA and native frames are supported.
Lets hope the future Vulkan video decode extension fits well within this
framework.
We are beginning to consider scenarios where a given HW Context
may be able to transfer frames to another HW Context without
passing via system memory - this would usually be when two
contexts represent different APIs on the same device (eg: Vulkan
and CUDA).
This is modelled as a transfer, as we have today, but where both
the src and the dst are hardware frames with hw contexts. We need
to be careful to ensure the contexts are compatible - particularly,
we cannot do transfers where one of the frames has been mapped via
a derived frames context - we can only do transfers for frames that
were directly allocated by the specified context.
Additionally, as we have two hardware contexts, the transfer function
could be implemented by either (or indeed both). To handle this
uncertainty, we explicitly look for ENOSYS as an indicator to try
the transfer in the other direction before giving up.
When clang works in MSVC mode, it does have the _byteswap_ulong
builtin, but one has to include stdlib.h before using it.
Signed-off-by: Martin Storsjö <martin@martin.st>
SetConsoleTextAttribute used to be unavailable for Windows Store apps,
but is available to them now. But GetStdHandle still is unavailable,
thus make sure to check for both functions before using code that
requires both.
Signed-off-by: Martin Storsjö <martin@martin.st>
In case of failure, all the successfully set entries are stored in
*pm. We need to manually free the created dictionary to avoid
memory leak.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
In order to access the original opaque parameter of a buffer in the buffer
pool. (The buffer pool implementation overrides the normal opaque parameter but
also saves it so it is accessible).
v2: add assertion check before dereferencing the BufferPoolEntry.
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes: signed integer overflow: 2147483647 + 1 cannot be represented in type 'int'
Fixes: 18333/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_COMFORTNOISE_fuzzer-5668481831272448
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
1)Some filters allow cross-referenced expressions e.g. x=y+10. In
such cases, filters evaluate expressions multiple times for
successful evaluation of all expressions. If the expression for one or
more variables contains a RNG, the result may vary across evaluation
leading to inconsistent values across the cross-referenced expressions.
2)A related case is circular expressions e.g. x=y+10 and y=x+10 which
cannot be succesfully resolved.
3)Certain filter variables may only be applicable in specific eval modes
and lead to a failure of evaluation in other modes e.g. pts is only
relevant for frame eval mode.
At present, there is no reliable means to identify these occurrences and
thus the error messages provided are broad or inaccurate. The helper
function introduced - av_expr_count_vars - allows developers to identify
the use and count of variables in expressions and thus tailor the error
message, allow for a graceful fallback and/or decide evaluation order.
remove_side_data is supposed to remove a single instance by design.
Since new_side_data() doesn't forbid add multiple instances of the
same type, remove_side_data should deal with that.
Signed-off-by: Marton Balint <cus@passwd.hu>
Performance of WMV3 decoding has speed up from 3.66x to 5.23x tested on 3A4000.
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Linux and OSX systems support basename and dirname via <libgen.h>, I plan to
make the wrapper interface conform to the standard interface first.
If it is feasible, I will continue to modify it to call the system interface
if there is already a system call interface.
You can get more description about the system interface by below command:
"man 3 basename"
Reviewed-by: Marton Balint <cus@passwd.hu>
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
When used ROUNDED_DIV(a,b), if a is unsigned integer zero, it's
will lead to an underflow issue(it called unsigned integer
wrapping).
Fixes#8062
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Mengye Lv <mengyelv@tencent.com>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
This bug has been introduced in 9e0a071e.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The pointer arguments to memcpy (and several other functions of the
C standard library) are not allowed to be NULL, not even when the number
of bytes to copy is zero. An AVEncryptionInitInfo's data pointer is
explicitly allowed to be NULL and yet av_encryption_init_info_add_side_data
unconditionally used it as a source pointer to copy from. This commit changes
this so that copying is only done if the number of bytes to copy is > 0.
Fixes ticket #8141 as well as a part of ticket #8150.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
It's often not obvious how option constants relate to numerical values.
Defaults are sometimes printed as numbers and from/to are always printed as numbers.
Printing the numeric values of options constants avoids this confusion.
It also allows to see which constants are equivalent.
Before this patch:
-segment_list_type <int> E........ set the segment list type (from -1 to 4) (default -1)
flat E........ flat format
csv E........ csv format
ext E........ extended format
ffconcat E........ ffconcat format
m3u8 E........ M3U8 format
hls E........ Apple HTTP Live Streaming compatible
Afterwards:
-segment_list_type <int> E........ set the segment list type (from -1 to 4) (default -1)
flat 0 E........ flat format
csv 1 E........ csv format
ext 3 E........ extended format
ffconcat 4 E........ ffconcat format
m3u8 2 E........ M3U8 format
hls 2 E........ Apple HTTP Live Streaming compatible
Signed-off-by: softworkz <softworkz@hotmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>