Given that the AVCodec.next pointer has now been removed, most of the
AVCodecs are not modified at all any more and can therefore be made
const (as this patch does); the only exceptions are the very few codecs
for external libraries that have a init_static_data callback.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This mostly reverts commit 4b2863ff01.
Said commit removed the freeing code from ff_mpv_common_init(),
ff_mpv_common_frame_size_change() and ff_mpeg_framesize_alloc() and
instead added the FF_CODEC_CAP_INIT_CLEANUP to several codecs that use
ff_mpv_common_init(). This introduced several bugs:
a) Several decoders using ff_mpv_common_init() in their init function were
forgotten: This affected FLV, Intel H.263, RealVideo 3.0 and V4.0 as well as
VC-1/WMV3.
b) ff_mpv_common_init() is not only called from the init function of
codecs, it is also called from AVCodec.decode functions. If an error
happens after an allocation has succeeded, it can lead to memleaks;
furthermore, it is now possible for the MpegEncContext to be marked as
initialized even when ff_mpv_common_init() returns an error and this can
lead to segfaults because decoders that call ff_mpv_common_init() when
decoding a frame can mistakenly think that the MpegEncContext has been
properly initialized. This can e.g. happen with H.261 or MPEG-4.
c) Removing code for freeing from ff_mpeg_framesize_alloc() (which can't
be called from any init function) can lead to segfaults because the
check for whether it needs to allocate consists of checking whether the
first of the buffers allocated there has been allocated. This part has
already been fixed in 76cea1d2ce.
d) ff_mpv_common_frame_size_change() can also not be reached from any
AVCodec.init function; yet the changes can e.g. lead to segfaults with
decoders using ff_h263_decode_frame() upon allocation failure, because
the MpegEncContext will upon return be flagged as both initialized and
not in need of reinitialization (granted, the fact that
ff_h263_decode_frame() clears context_reinit before the context has been
reinited is a bug in itself). With the earlier version, the context
would be cleaned upon failure and it would be attempted to initialize
the context again in the next call to ff_h263_decode_frame().
While a) could be fixed by adding the missing FF_CODEC_CAP_INIT_CLEANUP,
keeping the current approach would entail adding cleanup code to several
other places because of b). Therefore ff_mpv_common_init() is again made
to clean up after itself; the changes to the wmv2 decoder and the SVQ1
encoder have not been reverted: The former fixed a memleak, the latter
allowed to remove cleanup code.
Fixes: double free
Fixes: ff_free_picture_tables.mp4
Fixes: ff_mpeg_update_thread_context.mp4
Fixes: decode_colskip.mp4
Fixes: memset.mp4
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Do it only when requested with the AV_CODEC_EXPORT_DATA_VIDEO_ENC_PARAMS
flag.
Drop previous code using the long-deprecated AV_FRAME_DATA_QP_TABLE*
API. Temporarily disable fate-filter-pp, fate-filter-pp7,
fate-filter-spp. They will be reenabled once these filters are converted
in following commits.
These two are always called directly after each other (with the
exception of the calls in mpeg_decode_init() where some irrelevant
modifications of the avctx (which could just as well be done before
ff_mpv_decode_defaults(), because it doesn't have a pointer to the
AVCodecContext at all and therefore can't see these modifications at
all) are performed in between), so merge ff_mpv_decode_defaults() in
ff_mpv_decode_init().
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Recently we encountered an issue when decoding a h.263 file:
FFmpeg will freeze when decoding h.263 video with NVDEC. Turns out this is not directly related to NVDEC but is a problem that shows with several other HW decoders like VDPAU, though the exact kind of error is different (either error messages or freezing[1]). The root cause is that ff_thread_finish_setup() is called twice per frame from ff_h263_decode_frame(). This is not supported by ff_thread_finish_setup() and specifically checked for and warned against in the functions code. The issue is also specific to hw accelerated decoding only as the second call to ff_thread_finish_setup() is only issued when hw acceleration is on. The fix is simple: add a check that the first call is only send when hw acceleration is off, and the second call only when hw acceleration is on (see attached patch). This works fine as far as I was able to test with vdpau and nvdec/nvcuvid hw decoding. The patch also adds NVDEC to the hw config list if available.
I also noticed a secondary issue when browsing through the code which is that, according to documentation, ff_thread_finish_setup() should only be called if the codec implements update_thread_context(), which h263dec does not. The patch does not address this and I'm not sure any action needs to be taken here at all.
[1] This is depending on whether or not the hw decoder sets the HWACCEL_CAPS_ASYNC_SAFE flag
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
Since db77230894 parsing of
mpeg4-extradata lead to a "Failed to parse extradata" warning, because
ff_mpeg4_decode_picture_header returns AVERROR_INVALIDDATA in case that
no VOP was found. This patch adds a parameter to signify whether a
header (where the absence of a VOP does not raise an error) or not is
parsed. The first mode is of course used for parsing headers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@googlemail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The profile field is changed by code inside and outside the decoder,
its not a reliable indicator of the internal codec state.
Maintaining it consistency with studio_profile is messy.
Its easier to just avoid it and use only studio_profile
Fixes: assertion failure
Fixes: ffmpeg_crash_9.avi
Found-by: Thuan Pham, Marcel Böhme, Andrew Santosa and Alexandru Razvan Caciulescu with AFLSmart
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This includes a pointer to the associated hwaccel for decoders using
hwaccels - these will be used later to implement the hwaccel setup
without needing a global list.
Also added is a new file listing all hwaccels as external declarations -
this will be used later to generate the hwaccel list at configure time.
This includes a pointer to the associated hwaccel for decoders using
hwaccels - these will be used later to implement the hwaccel setup
without needing a global list.
Also added is a new file listing all hwaccels as external declarations -
this will be used later to generate the hwaccel list at configure time.
This was predictably nightmarish, given how ridiculous mpeg4 is.
I had to stare at the cuvid parser output for a long time to work
out what each field was supposed to be, and even then, I still don't
fully understand some of them. Particularly:
vop_coded: If I'm reading the decoder correctly, this flag will always
be 1 as the decoder will not pass the hwaccel any frame
where it is not 1.
divx_flags: There's obviously no documentation on what the possible
flags are. I simply observed that this is '0' for a
normal bitstream and '5' for packed b-frames.
gmc_enabled: I had a number of guesses as to what this mapped to.
I picked the condition I did based on when the cuvid
parser was setting flag.
Also note that as with the vdpau hwaccel, the decoder needs to
consume the entire frame and not the slice.
Libav, for some reason, merged this as a public API function. This will
aid in future merges.
A define is left for backwards compat, just in case some person
used it, since it is in a public header.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Deprecate older VA pixel formats (MOCO, IDCT) as it is now very unlikely
to ever be useful in the future. Only keep plain AV_PIX_FMT_VAAPI format
that is aliased to the older VLD variant.
This is an API change.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
h264.h and hevc.h are mutually exclusive due to defining some of the same
names. As such, we need to avoid forcing h264.h to be included if we want
hevc decode acceleration to be possible.
However, some of the pre-hwaccel helper functions need h264.h. To avoid
messy collisions, let's move the declaration of all those helpers to
a separate header which we will exclude for the hevc support (which will
be hwaccel-only).
Signed-off-by: Philip Langdale <philipl@overt.org>
Andreas Rheinhardt
Andreas Rheinhardt
Anton Khirnov
Mark Thompson
Limin Wang
Stefan Schoenefeld
fumoboy007
Andreas Rheinhardt
Carl Eugen Hoyos
Michael Niedermayer
Kieran Kunhya
Philip Langdale
Vittorio Giovara
Mark Thompson
Derek Buitenhuis
Rémi Denis-Courmont
Gwenole Beauchesne
Ronald S. Bultje
Sebastien Zwickert
Carl Eugen Hoyos
Michael Niedermayer
Andreas Cadhalpun