When keyframe intervals of dash segments are not perfectly aligned,
fragments in the stream can overlap in time. The previous sorting by
timestamp causes packets to be read out of decode order and results
in decode errors.
Insert new "trun" index entries into index_entries in the order that
the trun are referenced by the sidx.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When sidx box support is enabled, the code will skip reading all
trun boxes (each containing ctts entries for samples inthat box).
If seeks are attempted before all ctts values are known, the old
code would dump ctts entries into the wrong location. These are
then used to compute pts values which leads to out of order and
incorrectly timestamped packets.
This patch fixes ctts processing by always using the index returned
by av_add_index_entry() as the ctts_data index. When the index gains
new entries old values are reshuffled as appropriate.
This approach makes sense since the mov demuxer is already relying
on the mapping of AVIndex entries to samples for correct demuxing.
As a result of this all ctts entries are now 1-count. A followup
change will be submitted to remove support for > 1 count entries
which will simplify seeking.
Notes for future improvement:
Probably there are other boxes (stts, stsc, etc) that are impacted
by this issue... this patch only attempts to fix ctts since it
completely breaks packet timestamping.
This patch continues using an array for the ctts data, which is not
the most ideal given the rearrangement that needs to happen (via
memmove as new entries are read in). Ideally AVIndex and the ctts
data would be set-type structures so addition is always worst case
O(lg(n)) instead of the O(n^2) that exists now; this slowdown is
noticeable during seeks.
Signed-off-by: Dale Curtis <dalecurtis@chromium.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Adding an MOV format option to turn on/off the editlist supporting code, introduced in ca6cae73db
Signed-off-by: Sasi Inguva <isasi@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Retain the ranges of frame indexes when applying edit list in
mov_fix_index. The index ranges are then used to keep track of the frame
index of the current sample. In case of a discontinuity in frame indexes
due to edit, update the auxiliary info position accordingly.
Reviewed-by: Sasi Inguva <isasi@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This implements Spherical Video V1 and V2, as described in the
spatial-media collection by Google.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This implements Spherical Video V1 and V2, as described in the
spatial-media collection by Google.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This matrix needs to be applied after all others have (currently only
display matrix from trak), but cannot be handled in movie box, since
streams are not allocated yet. So store it in main context, and apply
it when appropriate, that is after parsing the tkhd one.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
According to spec ISO_IEC_15444_12 "For any media stream for which no segment index is present, referred to as non‐indexed stream, the media stream associated with the first Segment Index box in the segment serves as a reference stream in a sense that it also describes the subsegments for any non‐indexed media stream."
Signed-off-by: Sasi Inguva <isasi@google.com>
Reviewed-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This matrix needs to be applied after all others have (currently only
display matrix from trak), but cannot be handled in movie box, since
streams are not allocated yet. So store it in main context, and apply
it when appropriate, that is after parsing the tkhd one.
Fate tests are updated accordingly.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
3 parts:
- Supports multiple chapter streams
- Exports regular text chapter streams as opaque data. This prevents consumers
from showing chapters as if they were regular subtitle streams.
- Exports video chapter streams as thumbnails, and provides the first one as
an attached_pic.
This breaks files with legitimate single-entry edit lists,
and the hack, introduced in f03a081df0,
has no link to any known sample in its commit message.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This breaks files with legitimate single-entry edit lists,
and the hack, introduced in f03a081df0,
has no link to any known sample in its commit message.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Store data from each stsd in a separate extradata buffer, keep track of
the stsc index for read and seek operations, switch buffers when the
index differs. Decoder is notified with an AV_PKT_DATA_NEW_EXTRADATA
packet side data.
Since H264 supports this notification, and can be reset midstream, enable
this feature only for multiple avcC's. All other stsd types (such as
hvc1 and hev1) need decoder-side changes, so they are left disabled for
now.
This is implemented only in non-fragmented MOVs.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This feature is mostly only used by NLE software, and is
both of dubious value being enabled by default, and a
possible security risk.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This feature is mostly only used by NLE software, and is
both of dubious value being enabled by default, and a
possible security risk.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
support reading encrypted mp4 using aes-ctr, conforming to ISO/IEC
23001-7.
a new parameter was added:
- decryption_key - 128 bit decryption key (hex)
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
QuickTime metadata can come after trak data. Add indicator for which trak is being parsed (-1 if none) so that global metadata after the trak can be parsed.
Signed-off-by: Neil Birkbeck <neil.birkbeck@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Chapter-indexing can be expensive since chapters may be interspersed
throughout the entire file and may require many seeks - especially
costly when consuming a video over a remote protocol like http.
Furthermore it is often unnecessary, especially when only trying to get
video info (e.g. via ffprobe).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The Apple dev specification:
https://developer.apple.com/library/mac/documentation/QuickTime/QTFF/Metadata/Metadata.html
Basically the structure is like:
|--meta
|----hdlr
|----keys
|----ilst
1) The handler type in the metadata handler atom is ‘mdta’.
2) The key and value are stored separately for each key-value pair.
The 'keys' atom stores the key table, while 'ilst' atom stores the
values corresponding to the indices in the key table.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
The current behavior may produce a different sequence of packets
after seeking, compared to demuxing linearly from the beginning.
This is because the MOV demuxer seeks in each stream individually,
based on timestamp, which may set each stream at a slightly different
position than if the file would have been read sequentially.
This makes implementing certain operations, such as segmenting,
quite hard, and slower than need be.
Therefore, add an option which retains the same packet sequence
after seeking, as when a file is demuxed linearly.
The current behavior may produce a different sequence of packets
after seeking, compared to demuxing linearly from the beginning.
This is because the MOV demuxer seeks in each stream individually,
based on timestamp, which may set each stream at a slightly different
position than if the file would have been read sequentially.
This makes implementing certain operations, such as segmenting,
quite hard, and slower than need be.
Therefore, add an option which retains the same packet sequence
after seeking, as when a file is demuxed linearly.
The Extensible Metadata Platform tag can contain various kind of data
which are not strictly related to the video file, such as history of edits
and saves from the project file. So display XMP metadata only when the
user explicitly requires it.
Based on a patch by Marek Fort <marek.fort@chyronhego.com>.
This introduces a new option to the mov demuxer: -use_mfra_for
(pts|dts). When it's given and moofs and a MFRA are present, the MFRA's
TFRAs are read for fragment start times.
Unfortunately some programs that produce fragmented mp4s use the TFRA
time field for dts and some for pts. There is no realistic way to detect
which is the case, hence the responsibility is punted onto the user.
This also means that no behavioural change is enabled by default - you
must pass either dts or pts for anything to happen.
Without this change, timestamps for some discontinuous fragmented mp4 are
wrong, and cause audio/video desync and are not usable for generating
HLS.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
default-base-is-moof shall be set to track fragments compatible with DASH
Media Segments. So, this is a fundamental support for ISOBMFF ver. DASH.
This is meaningful only when base-data-offset-present is absent and two or
more track fragments are present in a movie fragment.
Signed-off-by: Martin Storsjö <martin@martin.st>
This uses STTS and TRUN information to calculate the fps
It seems to work with more files than the previous code
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Generate extradata with SPS/PPS based on container dimensions.
Authors of this commit are: Reimar and Thomas Mundt
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This allows to read a live isml movie and segment it using the
smoothstreaming muxer, which requires the bitrates to be known for each stream.
Signed-off-by: Alexandre Sicard <alexandre.sicard@smartjog.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>