Adds a fate test for the jpegxl_anim demuxer, that should allow testing
for true positives and false positives for animated jpegxl files. Note
that two of the test cases are not animated, in order to help sort out
false positives.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
When muxing, the AVStreams' side-data is typically set
by the caller before avformat_write_header();
it is not documented to be else. Yet the Matroska muxer
added an AVStereo3D side data if certain metadata
was present:
Since commit 4d686fb721
(adding support for AVStereo3D stream side-data),
the Matroska muxer checked certain stream tags that
contain Matroska's StereoMode and (if they are present)
converted this value into an AVStereo3D struct that
gets attached to the AVStream (reusing a function from
the demuxer). Afterwards the AVStereo3D side data struct
(whether it has just been added by the muxer or not) gets
parsed and converted back into a Matroska StereoMode.
Besides being an API violation this change broke
StereoMode values without a corresponding AVStereo3D
(namely the anaglyph ones).
This commit fixes this: A StereoMode given via tags
is now used-as-is; if no such tag exists and an AVStereo3D
side data exists, it is converted into the corresponding
StereoMode (if possible). This approach also fixes
handling of the anaglyph ones; the changes to the
matroska-stereo_mode are due to this.
The new STEREOMODE_STEREO3D_MAPPING has been put to
good use for this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When no output video framerate is specified by the user with -r or can
be inferred from the filtergraph, encoder setup will arbitrarily decide
that the framerate is 25fps. However, making up any framerate value for
VFR encoding is at best unnecessary.
Changes the results of the sub2video tests, where the input timebase is
now used instead of 1/25.
The fate-run.sh shell script exports LC_ALL=C before invoking the
test executables; this is probably done for consistency.
When executing Windows binaries with Wine, it normally handles
UTF-8 command line parameters just fine - but with LC_ALL set to
C, it treats them as plain ASCII.
As the unicode command line parameters wasn't the main thing
being tested here, just convert them to plain ASCII, for
portability. This fixes the test for all test configurations that
use Wine.
Signed-off-by: Martin Storsjö <martin@martin.st>
Writing the duration SimpleTag is special: It's size is
reserved in advance via an EBML Void element (if seekable)
and this reserved space is overwritten when writing the trailer;
it does not use put_ebml_string().
The string to write is created via snprintf on a buffer
of size 20; this buffer is then written via put_ebml_binary()
with a size of 20.
EBML strings need not be zero-terminated; if not, they
are implicitly terminated by the element's length field.
snprintf() always zero-terminates the buffer, i.e.
the last byte can be discarded when using an EBML string.
This patch does this.
The FATE changes are as expected: One byte saved for every
track; the only exception is the matroska-qt-mode test:
An additional byte is saved because an additional byte
could be saved from the enclosing Tags length field.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Do it only for video (the only thing for type for which HDR10+
makes sense).
This effectively reverts changes to several FATE ref-files
made in bda44f0f39.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Provides coverage for the code transforming the ALAC extradata.
Also set creation_time metadata to test this, too.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Matroska supports orthogonal transformations (both pure rotations
as well as reflections) via its 3D-projection elements, namely
ProjectionPoseYaw (for a horizontal reflection) as well as
ProjectionPoseRoll (for rotations). This commit adds support
for this.
Support for this in the demuxer has been added in
937bb6bbc1 and
the sample used in the matroska-dovi-write-config8 FATE-test
includes a displaymatrix indicating a rotation which is now
properly written and read, thereby providing coverage for
the relevant code in the muxer as well as the demuxer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The contents are full TTML XML documents. TTML writing tests'
results are updated as the streams are now properly identified
as TTML ones.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
This allows this common H.274 SEI to be parsed from both H.264
as well as HEVC, as well as probably from VVC in the future.
Generally attempts to keep the original code as similar as possible.
FATE test refererence changes only change the order of side data
export within a single frame. Nothing else seems to have changed.
This allows this common H.274 SEI to be parsed from both H.264
as well as HEVC, as well as probably from VVC in the future.
Generally attempts to keep the original code as similar as possible.
FATE test refererence changes only change the order of side data
export within a single frame. Nothing else seems to have changed.
Should set "number of frames" to bytes 24-27 of IVF header, not
duration.
It is described by [1], and confirmed by parsing all IVF files in [2].
This commit also updates the md5sum of refs to pass fate-cbs.
[1] Duck IVF - MultimediaWiki
https://wiki.multimedia.cx/index.php/Duck_IVF
[2] webm/vp8-test-vectors
https://chromium.googlesource.com/webm/vp8-test-vectors
Signed-off-by: Jianhui Dai <jianhui.j.dai@intel.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Changes the result of fate-mxf-probe-dv25, where the bitrate is now
exported.
Also changes the result of fate-bsf-dv-error-marker, where the exported
bitrate is now different. Note that the codec layer bitrate does not
match the container bitrate, because container timing is 25fps, while
the DV profile is 50.
No need to generate intermediate files and probe them. We only care to know that the
output of the bsf excludes the frames in question, and a simple checksum is enough.
Signed-off-by: James Almer <jamrial@gmail.com>
Fixed-point AAC decoder currently does not produce the same output on
all platforms. Until that is fixed, silence the audio stream using the
volume filter.
Also, actually use the aac_fixed decoder as was the original intent.
The code will currently add a small offset to avoid exact midpoints, but
this can cause inexact results when a float timestamp is exactly
representable as an integer.
Fixes off-by-one in the first frame duration in multiple FATE tests.
Use the next I/P/B or start code as the end of current frame.
Before the patch, extension start code, user data start code,
sequence end code and so on are treated as the start of next
frame.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
Since this is an external encoder not under our control, we cannot test
the encoded output exactly as is done for internal encoders. We can
still test however that the output is decodable and produces the
expected number of frames with expected dimensions, pixel formats, and
timestamps.
Currently those are set in different ways depending on whether the
stream is decoded or not, using some values from the decoder if it is.
This is wrong, because there may be arbitrary amount of delay between
input packets and output frames (depending e.g. on the thread count when
frame threading is used).
Always use the path that was previously used only for streamcopy. This
should not cause any issues, because these values are now used only for
streamcopy and discontinuity handling.
This change will allow to decouple discontinuity processing from
decoding and move it to ffmpeg_demux. It also makes the code simpler.
Changes output in fate-cover-art-aiff-id3v2-remux and
fate-cover-art-mp3-id3v2-remux, where attached pictures are now written
in the correct order. This happens because InputStream.dts is no longer
reset to AV_NOPTS_VALUE after decoding, so streamcopy actually sees
valid dts values.
Stop using InputStream.dts for generating missing timestamps for decoded
frames, because it contains pre-decoding timestamps and there may be
arbitrary amount of delay between input packets and output frames (e.g.
dependent on the thread count when frame threading is used). It is also
in AV_TIME_BASE (i.e. microseconds), which may introduce unnecessary
rounding issues.
New code maintains a timebase that is the inverse of the LCM of all the
samplerates seen so far, and thus can accurately represent every audio
sample. This timebase is used to generate missing timestamps after
decoding.
Changes the result of the following FATE tests
* pcm_dvd-16-5.1-96000
* lavf-smjpeg
* adpcm-ima-smjpeg
In all of these the timestamps now better correspond to actual frame
durations.
Previously they would only be used with trivial filtergraphs, because
filters did not handle frame durations. That is no longer true - most
filters process frame durations properly (there may still be some that
don't - this change will help finding and fixing them).
Improves output video frame durations in a number of FATE tests.
Adds JPEG 2000 decoder tests using materials from the conformance suite specified in
Rec. ITU-T T.803 | ISO/IEC 15444-4.
The test materials are available at https://gitlab.com/wg1/htj2k-codestreams
Signed-off-by: Pierre-Anthony Lemieux <pal@palemieux.com>
Paul B Mahol
Steven Liu
Steven Liu
Leo Izen
Andreas Rheinhardt
Anton Khirnov
Michael Niedermayer
Martin Storsjö
Jan Ekström
Jan Ekström
Tobias Rapp
Dai, Jianhui J
James Almer
Romain Beauxis
Zhao Zhili
Lynne
Pierre-Anthony Lemieux