changes since v1
- default behavior, no longer hidden behind decoder parameter
- updated tests to reflect change
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The Matroska muxer writes the Chapters early when chapters were already
available when writing the header; in this case any tags pertaining to
these chapters get written, too.
Yet if no chapters had been supplied before writing the header, Chapters
can also be written when writing the trailer if any are supplied. Tags
belonging to these chapters were up until now completely ignored.
This commit changes this: Writing the tags belonging to chapters has
been moved to mkv_write_chapters(). If mkv_write_tags() has not been
called yet (i.e. when chapters are written when writing the header),
the AVIOContext for writing the ordinary Tags element is used, but not
output, as this is left to mkv_write_tags() in order to only write one
Tags element. Yet if mkv_write_tags() has already been called,
mkv_write_chapters() will output a Tags element of its own which only
contains the tags for chapters.
When chapters are available initially, the corresponding tags will now
be the first tags in the Tags element; but the ordering of tags in Tags
is irrelevant anyway.
This commit also makes chapter_id_offset local to mkv_write_chapters()
as it is used only there and not reused at all.
Potentially writing a second Tags element means that the maximum number
of SeekHead entries had to be incremented. All the changes to FATE
result from the ensuing increase in the amount of space reserved for the
SeekHead (21 bytes more).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
We won't be able to seek back to write the actual duration anyway.
FATE-tests using the md5pipe command had to be updated due to this change.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Also fill x8-x17 with garbage before calling the function.
Figure out the number of stack parameters and make sure that the
value on the stack after those is untouched.
Signed-off-by: Martin Storsjö <martin@martin.st>
Figure out the number of stack parameters and make sure that the
value on the stack after those is untouched.
Signed-off-by: Martin Storsjö <martin@martin.st>
We should just use a normal bl here, and the linker will add the 'x'
bit if necessary.
This fixes calling the checkasm_fail_func on windows, where the
code is built in thumb mode (and the linker doesn't clear the 'x'
bit in the blx instruction).
Signed-off-by: Martin Storsjö <martin@martin.st>
have tested on linux x86_32/64, mingw32/64 arm & mips qemu
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
Tested on x86-32/64, mingw32/64, arm & mips qemu
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
This fixes tests on 32 bit x86 mingw with clang, which uses x87
fpu by default.
In this setup, while the get_expected function is declared to
return float, the compiler is (especially given the optimization
flags set) free to keep the intermediate values (in this case,
the return value from the inlined function) in higher precision.
This results in the situation where 7.28 (which actually, as
a float, ends up as 7.2800002098), multiplied by 100, is
728.000000 when really forced into a 32 bit float, but 728.000021
when kept with higher intermediate precision.
For the multiplication case, a more suitable epsilon would e.g.
be 2*FLT_EPSILON*fabs(expected_output), but just increase the
current hardcoded threshold for now.
Signed-off-by: Martin Storsjö <martin@martin.st>
Up until now, the Matroska muxer would mark a track as default if it had
the disposition AV_DISPOSITION_DEFAULT or if there was no track with
AV_DISPOSITION_DEFAULT set; in the latter case even more than one track
of a kind (audio, video, subtitles) was marked as default which is not
sensible.
This commit changes the logic used to mark tracks as default. There are
now three modes for this:
a) In the "infer" mode the first track of every type (audio, video,
subtitles) with default disposition set will be marked as default; if
there is no such track (for a given type), then the first track of this
type (if existing) will be marked as default. This behaviour is inspired
by mkvmerge. It ensures that the default flags will be set in a sensible
way even if the input comes from containers that lack the concept of
default flags. This mode is the default mode.
b) The "infer_no_subs" mode is similar to the "infer" mode; the
difference is that if no subtitle track with default disposition exists,
no subtitle track will be marked as default at all.
c) The "passthrough" mode: Here the track will be marked as default if
and only the corresponding input stream had disposition default.
This fixes ticket #8173 (the passthrough mode is ideal for this) as
well as ticket #8416 (the "infer_no_subs" mode leads to the desired
output).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Several EBML Master elements for which a good upper bound of the final
length was available were nevertheless written without giving an
upper bound of the final length to start_ebml_master(), so that their
length fields were eight bytes long. This has been changed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The Matroska muxer currently only adds CuePoints in three cases:
a) For video keyframes. b) For the first audio frame in a new Cluster if
in DASH-mode. c) For subtitles. This means that ordinary Matroska audio
files won't have any Cues which impedes seeking.
This commit changes this. For every track in a file without video track
it is checked and tracked whether a Cue entry has already been added
for said track for the current Cluster. This is used to add a Cue entry
for each first packet of each track in each Cluster.
Implements #3149.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Moreover, putting the Cues in front of the Clusters by reserving space
in advance is also tested.
The new capability of using ffprobe during a remux/transcode test are
used here for information about the chapters.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This is primarily intended to test that muxers correctly write chapters
or metadata; but given that it does this by having our demuxers read the
generated files, it also tests demuxers. And of course it may prove
useful for encoders, too.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, they were appended to the FATE_EXTERN-$(CONFIG_FFMPEG)
variable and were therefore activated when ffmpeg was enabled regardless
of whether ffprobe was enabled.
Also the same happened with FATE_SAMPLES_FASTSTART, although the
corresponding test (mov-faststart-4gb-overflow) only requires external
samples.
Furthermore, remove the unused FATE_FULL variable (FATE_EXTERN_FFPROBE has
taken its place).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Using random values for TrackUID and FileUID (as happens when the
AVFMT_FLAG_BITEXACT flag is not set) has the obvious downside of making
the output indeterministic. This commit mitigates this by writing the
potentially random values with a fixed size of eight byte, even if their
actual values would fit into less than eight bytes. This ensures that
even in non-bitexact mode, the differences between two files generated
with the same settings are restricted to a few bytes in the header.
(Namely the SegmentUID, the TrackUIDs (in Tracks as well as when
referencing them via TagTrackUID), the FileUIDs (in Attachments as
well as in TagAttachmentUID) as well as the CRC-32 checksums of the
Info, Tracks, Attachments and Tags level-1-elements.) Without this
patch, there might be an offset/a size difference between two such
files.
The FATE-tests had to be updated because the fixed-sized UIDs are also
used in bitexact mode.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If there are Attachments to write, the Matroska muxer currently
allocates two objects: An array that contains an entry for each
AttachedFile containing just the stream index of the corresponding
stream and the FileUID used for this AttachedFile; and a structure with
a pointer to said array and a counter for said array. These uids are
generated via code special to Attachments: It uses an AVLFG in the
normal and a sha of the attachment data in the bitexact case. (Said sha
requires an allocation, too.)
But now that an uid is generated for each stream in mkv_init(), there is
no need any more to use special code for generating the FileUIDs of
AttachedFiles: One can simply use the uid already generated for the
corresponding stream. And this makes the whole allocations of the
structures for AttachedFiles as well as the structures itself superfluous.
They have been removed.
In case AVFMT_FLAG_BITEXACT is set, the uids will be different from the
old ones which is the reason why the FATE-test lavf-mkv_attachment
needed to be updated. The old method had the drawback that two
AttachedFiles with the same data would have the same FileUID.
The new one doesn't.
Also notice that the dynamic buffer used to write the Attachments leaks
if an error happens when writing the buffer. By removing the
allocations potential sources of errors have been removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Tags in the Matroska file format can be summarized as follows: There is
a level 1-element called Tags containing one or many Tag elements each
of which in turn contain a Targets element and one or many SimpleTags.
Each SimpleTag roughly corresponds to a single key-value pair similar to
an AVDictionaryEntry. The Targets meanwhile contains information to what
the metadata contained in the SimpleTags contained in the containing Tag
applies (i.e. to the file as a whole or to an individual track).
The Matroska muxer writes such metadata. It puts the metadata of every
stream into a Tag whose Targets makes it point to the corresponding
track. And if the output is seekable, then it also adds another Tag for
each track whose Targets corresponds to the track and where it reserves
space in a SimpleTag to write the duration at the end of the muxing
process into.
Yet there is no reason to write two Tag elements for a track and a few
bytes (typically 24 bytes per track) can be saved by adding the duration
SimpleTag to the other Tag of the same track (if it exists).
FATE has been updated because the output files changed. (Tests that
write to unseekable output (pipes) needn't be updated (no duration tag
has ever been written for them) and the same applies to tests without
further metadata.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It represents the relationship between them more naturally and will be
useful in the following commits.
Allows significantly more frames in fate-h264-attachment-631 to be
decoded.
Zane van Iperen
Mark Reid
Paul B Mahol
Andreas Rheinhardt
Martin Storsjö
Josh de Kock
Limin Wang
Michael Niedermayer
Guo, Yejun
Steven Liu
vectronic
Lynne
Linjie Fu
James Almer
Michael Bradshaw
John Stebbins
Anton Khirnov