This does require libmysofa with today's latest commit (08f243d1ec).
They already had a pkg-config file, but the dependencies weren't setup right. Until now.
This should be included as `<lilv/lilv.h>`, same as is done in af_lv2.c.
Forcing the extra lilv-0 breaks platforms where the include dir is
`/usr/include/lilv/lilv.h` rather than
`/usr/include/lilv-0/lilv/lilv.h`.
The new include path works for both, because the `pkg-config --cflags`
includes `-I/usr/include/lilv-0`.
Fixes PMT parsing in some mpegts streams which contain
multiple tables within the PMT pid. Previously, the parser
assumed only one table was present in each packet, and discarded
the rest of the section data after attempting to parse the first
table.
A similar issue was documented in the BeyondTV software[1], which
helped me diagnose the same bug in the ffmpeg mpegts demuxer. I also
tried DVBInspector, libdvbpsi's dvbinfo, and tstools' tsinfo to
help debug. The former two properly read PMTs with multiple tables,
whereas the last has the same bug as ffmpeg.
I've created a minimal sample[2] which contains the combined PMT.
Here's what ffmpeg probe shows before and after this patch:
Before:
Input #0, mpegts, from 'combined-pmt-tids.ts':
Duration: 00:00:01.08, start: 4932.966167, bitrate: 741 kb/s
Program 1
No Program
Stream #0:0[0xf9d]: Audio: ac3, 48000 Hz, mono, fltp, 96 kb/s
Stream #0:1[0xf9b]: Audio: mp3, 0 channels, fltp
Stream #0:2[0xf9c]: Unknown: none
After:
Input #0, mpegts, from 'combined-pmt-tids.ts':
Duration: 00:00:01.11, start: 4932.966167, bitrate: 718 kb/s
Program 1
Stream #0:0[0xf9b]: Video: mpeg2video ([2][0][0][0] / 0x0002), none(tv, top first), 29.97 fps, 29.97 tbr, 90k tbn, 90k tbc
Stream #0:1[0xf9c](eng): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, 5.1(side), fltp, 384 kb/s
Stream #0:2[0xf9d](spa): Audio: ac3 (AC-3 / 0x332D4341), 48000 Hz, mono, fltp, 96 kb/s
With the patch, the PMT is parsed correctly so the streams are
created in the correct order, are associated with "Program 1",
and their codecs are set correctly.
[1] http://forums.snapstream.com/vb/showpost.php?p=343816&postcount=201
[2] https://s3.amazonaws.com/tmm1/combined-pmt-tids.ts
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This allows remuxing streams from one mpegts container to another,
without requiring avformat_find_stream_info() (or using `ffmpeg
-probesize 32` on the cli).
Signed-off-by: Aman Gupta <aman@tmm1.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
SMPTE 386M (D-10) lists 4 as value to be used
SMPTE 377-1-2009 says
"The definitions of 00h (coSiting) and 04h (Rec 601) are equivalent. The value of 04h is deprecated. New
MXF encoders shall use the value of 00h instead."
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Adds tests for the hue angle and brightness filter parameters.
Renames the existing saturation parameter test for consistency.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
The artificial sample file sei-1.h264 contains five frames (IDR P B I B)
and the following SEI message types:
* Buffering period
* Picture timing
* Pan-scan rectangle (display as 4:3)
* User data registered, containing A/53 closed captions (captions match
frame content, including reordering)
* Recovery point (at the I frame)
* Display orientation (identity transformation)
* Mastering display (with arbitrary contents)
* Undefined SEI type 1234 (containing ascending bytes)
Formats ARGB32, XRGB32, ABGR32, and XBGR32 were added to V4L2 instead
of ill-defined deprecated RGB32/BGR32 pixel formats.
When pixel format is not specified explicitly FFmpeg tries formats in
order in which they are stored in the table. Therefore formats are
sorted as follows: BGR is preferred over RGB and XBGR is preferred
over ARGB, because it could give better performance by ignoring alpha
component.
'-sei xxx' is added to control SEI insertion, so far only mastering
display colour volume is available for testing.
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Similar to H264, cbs_h265_{read, write}_nal_unit() can handle HEVC
prefix SEI NAL units. Currently mastering display colour volume SEI
message is added only, we may add more SEI message if needed later
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Every fourcc in vaapi_drm_format_map should be in
vaapi_format_map, so add an assert to ensure we have the right maps.
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The flag of input_available must be set when pic_start is not NULL, so
add an assert to ensure it is true. In addition, the assert on last_pic
is unnecessary now, so remove this assert.
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The main issue here was the use of [i] instead of [i * 3] for the 32x32
matrix. As part of fixing this, I changed the code to match that used
in vdpau_hevc, which I spent a lot of time verifying.
I also changed to calculating NumPocTotalCurr using the existing helper,
which is what vdpau does.
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
fix the warning: "function declaration isn’t a prototype", in C
int foo() and int foo(void) are different functions. int foo()
accepts an arbitrary number of arguments, while int foo(void) accepts 0
arguments.
Signed-off-by: Jun Zhao <mypopydev@gmail.com>
Signed-off-by: Thomas Mundt <tmundt75@gmail.com>
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Vishwanath Dixit
James Almer
Carl Eugen Hoyos
Aman Gupta
Paul B Mahol
Reino Wijnsma
Tomas Härdin
Karthick Jeyapal
Michael Niedermayer
Niklas Haas
Tobias Rapp
Mark Thompson
Anton Leontiev
Haihao Xiang
Philip Langdale
Timo Rothenpieler
Jun Zhao
Thomas Mundt