After the last few commits, the functions for writing master elements
with CRC-32 elements didn't really make use of the ebml_master
structure any more, so remove these parameters from the functions.
The only things that still need to be kept are the positions of the
level 1 elements that are written preliminarily and updated later.
These positions are stored in the MatroskaMuxContext and
replace the corresponding ebml_master structures.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now, a block's relative offset has been reported as the offset
in the log messages output when writing blocks; given that it is
impossible to know the real offset from the beginning of the file at
this point due to the fact that it is not yet known how many bytes will
be used for the containing cluster's length field both the relative
offset in the cluster as well as the offset of the containing cluster
will be reported from now on.
Furthermore, the TrackNumber of the written block has been added to the
log output.
Also, the log message for writing vtt blocks has been brought in line
with the message for normal blocks.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now, the length field of most level 1 elements has been written
using eight bytes, although it is known in advance how much space the
content of said elements will take up so that it would be possible to
determine the minimal amount of bytes for the length field. This
commit changes this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes intendation, whitespace, a typo and renames a variable
(dyn_bc->cluster_bc) to make its meaning clearer and to bring
it more in line with the naming of similar variables.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Given that in both the seekable as well as the non-seekable mode dynamic
buffers are used to write level 1 elements and that now no seeks are
used in the seekable case any more, the two modes can be combined; as a
consequence, the non-seekable mode automatically inherits the ability to
write CRC-32 elements.
There are no differences in case the output is seekable; when it is not
and writing CRC-32 elements is disabled, there can still be minor
differences because before this commit, the EBML ID and length field
were counted towards the cluster size limit; now they no longer are.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now, the writing process for level 1 elements (those elements
for which CRC-32 elements are written by default) was this in case the
output was seekable: Write the EBML ID, write an "unkown length" EBML
number of the desired length, then write the element into a dynamic
buffer, then write the dynamic buffer (after possible calculation and
writing of the CRC-element), then seek back to the size element and
overwrite the unknown-size element with the real size. The seeking and
overwriting part has been eliminated by not writing the size initially.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
A Matroska EBML ID can only be maximally four bytes long, so make the
variables denoting EBML IDs uint32_t instead of unsigned int to
better reflect this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
All places where end_ebml_master_crc32_preliminary are used already
check for whether the output is seekable, so the check in the function
is redundant.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Since 4e3bdf729a there is no reason any
more to treat the seekable and non-seekable cases separate with regards
to the log message for a new cluster. This effectively reverts
d41aeea8a6.
Also improved the log message: "pts 80dts 0" -> "pts 80, dts 0".
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now, the check for whether to write CRC32 elements was always
mkv->write_crc && mkv->mode != MODE_WEBM. This is equivalent to simply
set write_crc to zero in WebM-mode. And this is what this commit does.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until e7ddafd515 the Matroska muxer
wrote a secondary seek head referencing all the clusters. When this
was changed, a (now completely wrong) comment remained and the unique
remaining seek head was still called main_seekhead. This has been
changed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now the EBML Header length field has been written with eight
bytes, although the EBML Header is always so small that only one byte
is needed for it. This patch saves seven bytes for every Matroska/Webm
file.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The upper bounds currently used for determining the size of a CuePoint's
length field can be improved somewhat; as a result, a CuePoint
containing three CueTrackPositions will now only need a size field
with one byte length.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The earlier code included the size of the BlockGroup's length field and
the EBML ID in the calculation of the size for the payload and ignored
the size of the duration's length field. This meant that Blockgroups
corresponding to packets with size 2^(7n) - 17 - n - i, i = 0,..., n - 1,
n = 1,..., 8 (i.e. 110, 16364, 16365, 2097130..2097132, ...) were written
with length fields that are unnecessarily long.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
At this point, ts already includes the ts_offset so that the relative
time written with the cluster is already given by ts - mkv->cluster_pts.
It is this number that needs to fit into an int16_t.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Fix memory leak after write trailer for #7827, only store a audio
packet whose buffer has size greater than zero in cur_audio_pkt.
Audio packets with size zero, but with side-data currently lead to
memleaks, in the Matroska muxer, because they are not properly freed:
They are currently put into an AVPacket in the MatroskaMuxContext to
ensure that the necessary audio is always available for a new cluster,
but are only written and freed when their size is > 0.
As the only use we have for such packets consists in updating the
CodecPrivate it makes no sense to store these packets at all and this
is how this commit solves the memleak.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@googlemail.com>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Nothing prevents it to work except this check. AV1 is already supported
by Matroska muxer and aomenc produces WebM/AV1 files as well.
Signed-off-by: Kagami Hiiragi <kagami@genshiken.org>
Signed-off-by: James Almer <jamrial@gmail.com>
This is a temporary workaround for transcoding scenarious using libaom-av1
encoder, which currently can't propagate extradata during initialization.
Signed-off-by: James Almer <jamrial@gmail.com>
Make sure to not write forbidden OBUs to CodecPrivate, and do the same with
unnecessary OBUs for packets.
Signed-off-by: James Almer <jamrial@gmail.com>
If the API user doesn't set avg_frame_rate, matroskaenc will write the
current timebase as "default duration" for the video track. This makes
no sense, because the "default duration" implies the framerate of the
video. Since the timebase is forced to 1/1000, this will make the
resulting file claim 1000fps.
Drop it and don't write the element. It's optional, so it's better not
to write it if the framerate is unknown.
Strangely does not require FATE changes.
Prevents out of array accesses. Adressess ticket #6873
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
WebM supports a subset of elements from the Tags master.
See https://www.webmproject.org/docs/container/#tagging
Reviewed-by: Ivan Janatra <janatra@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>
WebM supports a subset of elements from the Chapters master.
See https://www.webmproject.org/docs/container/#chapters
Addresses ticket #6425
Reviewed-by: James Zern <jzern@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This adapts and merges commit f4bf236338
from libav, originally skipped in 13a211e632
as it was not necessary back then.
Is's applied now in preparation for the following patches, where the
aac_adtstoasc bitstream filter will start to correctly propagate the new
extradata through packet side data.
Signed-off-by: James Almer <jamrial@gmail.com>
The same warning is issued when actual unknown spherical metadata is
found further down in the function.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
ts_offset was added to cluster timecode, but then effectively subtracted
back off the block timecode
When setting initial_padding for an audio stream, the timestamps are
written incorrectly to the mkv file. cluster timecode gets written
as pts0 + ts_offset which is correct, but then block timecode gets
written as pts - cluster timecode which expanded is
pts - (pts0 + ts_offset). Adding cluster and block tc back together:
cluster + block = (pts0 + ts_offset) + (pts - (pts0 + ts_offset)) = pts
But the result should be pts + ts_offset since demux will subtract the
CodecDelay element from pts and set initial_padding to CodecDelay.
This patch gives the correct result.
James Almer
Andreas Rheinhardt
Tristan Matthews
Jun Zhao
Carl Eugen Hoyos
Paul B Mahol
Sigga Regina
Kagami Hiiragi
wm4
Aleksandr Slobodeniuk
Luca Barbato
Carl Eugen Hoyos
John Stebbins