v2:
- use uint16_t instead of int to store 10-bit ancillary data
- fix ancillary line numbers for 1080p
- some comments and clarifications as requested by Aaron Levinson
Signed-off-by: Marton Balint <cus@passwd.hu>
This also add supports for 4K DeckLink cards because they always output the
ancillary data in 10-bit.
v2:
- only try teletext decoding for 576i PAL mode
- some comments as requested by Aaron Levinson
Signed-off-by: Marton Balint <cus@passwd.hu>
This one changes the previous vmaf patch to libvmaf to keep it separate from the
native implementation of vmaf inside ffmpeg later.
Signed-off-by: Ashish Singh <ashk43712@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This also adds support to avconv (which is trivial due to the new
hwaccel API being generic enough).
The new decoder setup code in dxva2.c is significantly based on work by
Steve Lhomme <robux4@gmail.com>, but with heavy changes/rewrites.
Merges Libav commit f9e7a2f95a.
Also adds untested VP9 support.
The check for DXVA2 COBJs is removed. Just update your MinGW to
something newer than a 5 year old release.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
To be used with the new d3d11 hwaccel decode API.
With the new hwaccel API, we don't want surfaces to depend on the
decoder (other than the required dimension and format). The old D3D11VA
pixfmt uses ID3D11VideoDecoderOutputView pointers, which include the
decoder configuration, and thus is incompatible with the new hwaccel
API. This patch introduces AV_PIX_FMT_D3D11, which uses ID3D11Texture2D
and an index. It's simpler and compatible with the new hwaccel API.
The introduced hwcontext supports only the new pixfmt.
Frame upload code untested.
Significantly based on work by Steve Lhomme <robux4@gmail.com>, but with
heavy changes/rewrites.
Merges Libav commit fff90422d1.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
If flushing is not disabled, then mux.c will signal the end of the packets with
an AVIO_DATA_MARKER_FLUSH_POINT, and aviobuf will be able to decide to flush or
not based on the preferred minimum packet size set by the used protocol.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
Takes a raw input stream containing frames with correct timestamps but
possibly out of order and inserts additional show-existing-frame
packets to correct the ordering.
(cherry picked from commit 34e051d168)
(cherry picked from commit b43b95f478)
Also converted from bitstream to get_bits.
NASM is more actively maintained and permits generating dependency information
as a sideeffect of assembling, thus cutting build times in half.
(Cherry-picked from libav commit 57b753b445)
Signed-off-by: James Almer <jamrial@gmail.com>
According to libavfilter/scale.c, if the width and height are both
less than or equal to 0 then the input size is used for both
dimensions. It does not need to be -1. -1:-1 is the same as 0:0 which
is the same as -10:-42, etc.
if (w < 0 && h < 0)
eval_w = eval_h = 0;
The documentation for the zscale filter has also been updated since the
behavior is identical.
Signed-off-by: Kevin Mark <kmark937@gmail.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Use the flags argument of av_hwframe_ctx_create_derived() to pass the
mapping flags which will be used on allocation. Also, set the format
and hardware context on the allocated frame automatically - the user
should not be required to do this themselves.
(cherry picked from commit c5714b51aa)
This only supports one device globally, but more can be used by
passing them with input streams in hw_frames_ctx or by deriving new
devices inside a filter graph with hwmap.
(cherry picked from commit e669db7610)
Adds functions to convert to/from strings and a function to iterate
over all supported device types. Also adds a new invalid type
AV_HWDEVICE_TYPE_NONE, which acts as a sentinel value.
(cherry picked from commit b7487f4f3c)
We have floor, ceil, and trunc. Let's add round.
Signed-off-by: Kevin Mark <kmark937@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Variables pertaining to the main video are now available when
using the scale2ref filter. This allows, as an example, scaling a
video with another as a reference point while maintaining the
original aspect ratio of the primary/non-reference video.
Consider the following graph: scale2ref=iw/6:-1 [main][ref]
This will scale [main] to 1/6 the width of [ref] while maintaining
the aspect ratio. This works well when the AR of [ref] is equal to
the AR of [main] only. What the above filter really does is
maintain the AR of [ref] when scaling [main]. So in all non-same-AR
situations [main] will appear stretched or compressed to conform to
the same AR of the reference video. Without doing this calculation
externally there is no way to scale in reference to another input
while maintaining AR in libavfilter.
To make this possible, we introduce eight new constants to be used
in the w and h expressions only in the scale2ref filter:
* main_w/main_h: width/height of the main input video
* main_a: aspect ratio of the main input video
* main_sar: sample aspect ratio of the main input video
* main_dar: display aspect ratio of the main input video
* main_hsub/main_vsub: horiz/vert chroma subsample vals of main
* mdar: a shorthand alias of main_dar
Of course, not all of these constants are needed for maintaining the
AR, but adding additional constants in line of what is available for
in/out allows for other scaling possibilities I have not imagined.
So to now scale a video to 1/6 the size of another video using the
width and maintaining its own aspect ratio you can do this:
scale2ref=iw/6:ow/mdar [main][ref]
This is ideal for picture-in-picture configurations where you could
have a square or 4:3 video overlaid on a corner of a larger 16:9
feed all while keeping the scaled video in the corner at its correct
aspect ratio and always the same size relative to the larger video.
I've tried to re-use as much code as possible. I could not find a way
to avoid duplication of the var_names array. It must now be kept in
sync with the other (the normal one and the scale2ref one) for
everything to work which does not seem ideal. For every new variable
introduced/removed into/from the normal scale filter one must be
added/removed to/from the scale2ref version. Suggestions on how to
avoid var_names duplication are welcome.
var_values has been increased to always be large enough for the
additional scale2ref variables. I do not forsee this being a problem
as the names variable will always be the correct size. From my
understanding of av_expr_parse_and_eval it will stop processing
variables when it runs out of names even though there may be
additional (potentially uninitialized) entries in the values array.
The ideal solution here would be using a variable-length array but
that is unsupported in C90.
This patch does not remove any functionality and is strictly a
feature patch. There are no API changes. Behavior does not change for
any previously valid inputs.
The applicable documentation has also been updated.
Signed-off-by: Kevin Mark <kmark937@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The library has stopped being developed and Debian has removed it
from its repositories citing security issues.
The native Dirac decoder supports everything the library has and basic
encoding support is still provided via the native vc2 (Dirac Pro, intra
only version of Dirac) encoder. Hence, there's no reason to still support
linking to the library and potentially leading users into security issues.
See http://lists.ffmpeg.org/pipermail/ffmpeg-user/2017-April/035975.html
Parsed_filter_X could remain and user can override it with custom one.
Example:
ffplay -f lavfi "nullsrc=s=640x360,
sendcmd='1 drawtext@top reinit text=Hello; 2 drawtext@bottom reinit text=World',
drawtext@top=x=16:y=16:fontsize=20:fontcolor=Red:text='',
drawtext@bottom=x=16:y=340:fontsize=16:fontcolor=Blue:text=''"
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Muhammad Faiz <mfcc64@gmail.com>
Mark Thompson
Marton Balint
Ashish Singh
Paul B Mahol
Steven Liu
wm4
Diego Biurrun
Kevin Mark
Vittorio Giovara
Stefano Sabatini
Rostislav Pehlivanov
James Almer
Muhammad Faiz