These arrays have a size of 180 resp. six bytes. This does not
make it worthwhile to export them due to the overhead this occurs;
for x64 Elf/Linux/GNU: 2x2B version, 2x24B .dynsym, 24B .rela.dyn,
8B .got, 4B hash + twice the size of the name (here 20+23B).
Therefore these symbols are unavprived and duplicated for shared
builds.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
avpriv_mpeg4audio_sample_rates has a size of 64B and it is currently
avpriv; a clone of it exists in aacenctab.h and from there it is inlined
in aacenc.c (which also uses the avpriv version) and in the FLV muxer.
This means that despite it being avpriv both libavformat as well as
libavcodec have copies already.
This situation is clearly suboptimal. Given the overhead of exporting
symbols (for x64 Elf/Linux/GNU: 2x2B version, 2x24B .dynsym, 24B .rela.dyn,
8B .got, 4B hash + twice the size of the name (here 31B)) the object is
unavprived, i.e. duplicated into libavformat when creating a shared
build; but the duplicates in the AAC encoder and FLV muxer are removed.
This involves splitting of the sample rate table into a file of its own;
this allowed to break some spurious dependencies (e.g. both the AAC
encoder as well as the Matroska demuxer actually don't need the
mpeg4audio_get_config stuff).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There are seven MJPEG-tables, five small (1x12, 4x17) and two
not small (2x162). These are all avpriv, despite this not being
worthwhile due to the overhead of exporting a symbol: The total
overhead for each symbol consists of two entries in .dynsym (24B each),
one entry in the importing library's .rela.dyn (24B) and one in .got
(8B) as well as 2x2B for symbol versions and 4B for symbol hashes
in the exporting library; in addition to that, the name of the symbol
is included in both exporting and importing libraries, using 2x210 bytes
in this case.
(The above numbers are for a x64 Elf/Linux/GNU system. Other platforms
will give different numbers.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Said table is 64 bytes long and exported so that it can be used both
in libavcodec and libavformat. This commit stops doing so and instead
duplicates it for shared builds, because the overhead of exporting the
symbol is bigger than 64 bytes. It consists of the length of the name of
the symbol (2x24 bytes), two entries in .dynsym (2x24 bytes), two
entries for symbol version (2x2 bytes), one hash value in the exporting
library (4 bytes) in addition to one entry in the importing library's
.got and .rela.dyn (8 + 24 bytes).
(The above numbers are for a Linux/GNU/Elf system; the numbers for other
platforms may be different.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is small (16 B) and therefore the overhead of exporting it more
than outweighs the size savings from not having duplicated symbols:
When the symbol is no longer avpriv, one saves twice the size of
the string containing the symbols name (2x30 byte), two entries
in .dynsym (24 bytes each on x64), one entry in the importing libraries
.got and .rela.dyn (8 + 24 bytes on x64) and two entries for the
symbol version (2 bytes each) and one hash value in the exporting
library (4 bytes).
(The exact numbers are of course different for other platforms
(e.g. when using dlls), but given that the strings saved alone
more than outweigh the array size it can be presumed that this
is beneficial for all platforms.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In case of shared builds, some object files containing tables
are currently duplicated into other libraries: log2_tab.c,
golomb.c, reverse.c. The check for whether this is duplicated
is simply whether CONFIG_SHARED is true. Yet this is crude:
E.g. libavdevice includes reverse.c for shared builds, but only
needs it for the decklink input device, which given that decklink
is not enabled by default will be unused in most libavdevice.so.
This commit changes this by making it more explicit about what
to duplicate from other libraries. To do this, two new Makefile
variables were added: SHLIBOBJS and STLIBOBJS. SHLIBOBJS contains
the objects that are duplicated from other libraries in case of
shared builds; STLIBOBJS contains stuff that a library has to
provide for other libraries in case of static builds. These new
variables provide a way to enable/disable with a finer granularity
than just whether shared builds are enabled or not. E.g. lavd's
Makefile now contains: SHLIBOBJS-$(CONFIG_DECKLINK_INDEV) += reverse.o
Another example is provided by the golomb tables. These are provided
by lavc for static builds, even if one uses a build configuration
that makes only lavf use them. Therefore lavc's Makefile contains
STLIBOBJS-$(CONFIG_MXF_MUXER) += golomb.o, whereas lavf's Makefile
has a corresponding SHLIBOBJS-$(CONFIG_MXF_MUXER) += golomb_tab.o.
E.g. in case the MXF muxer is the only component needing these tables
only libavformat.so will contain them for shared builds; currently
libavcodec.so does so, too.
(There is currently a CONFIG_EXTRA group for golomb. But actually
one would need two groups (golomb_avcodec and golomb_avformat) in
order to know when and where to include these tables. Therefore
this commit uses a Makefile-based approach for this and stops
using these groups for the users in libavformat.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Improves code legibility by not using bit shifts.
Also avoids duplicating the dvcC/dvvC ISOM box writing code.
Signed-off-by: quietvoid <tcChlisop0@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
To avoid duplicating code. The implementation in dovi_isom is identical.
Signed-off-by: quietvoid <tcChlisop0@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Adds handling of dvcC/dvvC block addition mappings.
The parsing creates AVDOVIDecoderConfigurationRecord side data.
The configuration block is written when muxing into Matroska,
if DOVI side data is present for the track.
Most of the Matroska element parsing is based on Plex's FFmpeg source code.
Signed-off-by: quietvoid <tcChlisop0@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Adds demuxer for Square Enux SCD files.
Based off [1] and personal investigation.
This has only been tested against Drakengard 3 (PS3) *_SCD.XXX files
(big-endian). As it is highly likely that FFXIV (PC) files are little-endian,
this demuxer is marked as experimental until this can be confirmed.
[1]: http://ffxivexplorer.fragmenterworks.com/research/scd%20files.txt
Reviewed-by: Peter Ross <pross@xvid.org>
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
libavformat/utils.c has over 4800 lines and is supposed to contain
"various utility functions for use within FFmpeg". In reality it
contains all that and the whole demuxing core of libavformat.
This is especially bad, because said file includes the FFMPEG_VERSION
(the git commit sha) so that it is rebuilt whenever the commit HEAD
points to changes. Therefore this commit makes it smaller by moving
the demuxing code out to a new file, demux.c (in analogy to mux.c
for the muxing code).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
libavformat/utils.c has over 5500 lines and is supposed to contain
"various utility functions for use within FFmpeg". In reality it
contains all that and the whole demuxing+seeking core of libavformat.
This is especially bad, because said file includes the FFMPEG_VERSION
(the git commit sha) so that it is rebuilt whenever the commit HEAD
points to changes. Therefore this commit starts making it smaller
by factoring the seeking code out.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Includes basic support for both the ISMV ('dfxp') and MP4 ('stpp')
methods. This initial version also foregoes fragmentation support
in case the built-in sample squashing is to be utilized, as this
eases the initial review.
Additionally, add basic tests for both muxing modes in MP4.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
These demuxers don't need anything from rawdec; they furthermore only
used rawdec.h to include opt.h. Both of this has been fixed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Format is still used by modders of these old games.
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: Aidan Richmond <aidan.is@hotmail.co.uk>
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
This commit adds a "gophers" handler to the gopher protocol. gophers
is a community-adopted protocol that acts the same way like normal
gopher with the added TLS encapsulation.
The gophers protocol is supported by gopher servers like geomydae(8),
and clients like curl(1), clic(1), and hurl(1).
This commit also adds compilation guards to both gopher and gophers,
since now there are two protocols in the file it makes sense to
have this addition.
Signed-off-by: parazyd <parazyd@dyne.org>
Signed-off-by: Marton Balint <cus@passwd.hu>
Enables writing TTML documents or encoded TTML paragraphs as such
documents.
Additionally, a test for the combined TTML encoder and muxer has
been added to validate that the components still work.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
Commit 0d1229f1d2 factored the main part
of the voc demuxer's read_packet function out; yet when this Libav
commit was merged in f99195d56f, the
dependency of the other users of this function on vocdec.o was
unnecessarily kept. This commit fixes this.
While just at it, also disable the data only used by the voc demuxer
and muxer in voc.c if both of them are disabled.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The NUT and avi demuxers only need ff_codec_movvideo_tags and so this
removes a dependency on the rest of isom.c as well as on mpeg4audio.c
(which isom depends on); it is similar for the Matroska demuxer and
muxers, except that the mpeg4audio.c dependency can't be avoided.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This is a result of the mov channel parsing stuff being factored out
of mov.c twice: Once in 91b782720f
to isom.c and later in 3bab7cd128.
Also remove the isom.h header; and while just at it, remove an unused
mathematics.h inclusion.
(isom.c actually depends upon mpeg4audio from libavcodec for
avpriv_mpeg4audio_get_config2 and avpriv_mpa_freq_tab; yet there is
no configure dependency for iso_media which leads to failure of shared
builds.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
AMV is a hard-coded (and broken) subset of AVI. It's not worth sullying
the existing AVI muxer with its filth.
Fixes ticket #747.
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
Andreas Rheinhardt
quietvoid
James Almer
Pierre-Anthony Lemieux
Limin Wang
Zane van Iperen
Nachiket Tarate
Jan Ekström
Aidan Richmond
Gyan Doshi
Paul B Mahol
parazyd
Andreas Rheinhardt
Derek Buitenhuis
Peter Ross
hwren