This muxer was untested up until now; had it been tested, it would
have been obvious that it has been broken for years.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes trac issue #7473.
Removes encoder delay (skip samples) and writes remaining frame samples after EOF to get correct sample count.
Output is now accurate vs players that use Microsoft's codecs (Windows Media Format Runtime).
Tested vs encode>decode WMAv2 with MS's codecs and most sample rate/bit rate/channel/mode combinations in ASF/XWMA.
WMAv1 appears to use the same delay, from FFmpeg samples.
Signed-off-by: bnnm <bananaman255@gmail.com>
subtitles.mak's fate-sub tests utilize a more strict comparator
("rawdiff"), which causes the tests fail in case of white space
differences, such as CRLF vs LF. This in turn causes these
ffprobe-using TTML-in-MP4 tests to fail on non-LF systems such as
Windows or wine.
Includes basic support for both the ISMV ('dfxp') and MP4 ('stpp')
methods. This initial version also foregoes fragmentation support
in case the built-in sample squashing is to be utilized, as this
eases the initial review.
Additionally, add basic tests for both muxing modes in MP4.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
Up until now, the Matroska muxer did not use the dispositions it is
given as-is; instead it by default overrode the disposition of the first
track of a kind (audio, video, subtitles) if no track of this kind has
the default disposition set. And up until recently, it also enforced
by default that no more than one track of each kind be marked as
default.
The rationale for the former is that there are lots of containers which
lack the concept of default streams, so that it is not uncommon for no
stream to be marked as default at all; the rationale for the latter was
that up until recently, it was dubious whether the Matroska specification
allowed more than one default stream for track type (e.g. mkvmerge
disallowed it). It was this point which led to the implementation of
the above mentioned behaviour inspired by mkvmerge.
Yet the Matroska specifications have changed and now explicitly allow
to set more than one track of each type as default, so that the main
reason of not using the dispositions as-is was rendered moot. Therefore
this commit changes the default to pass the disposition through.
The matroska-mpegts-remux FATE-test has been updated to still use the
old "infer" mode so that it is still covered by FATE; the
matroska-zero-length-block test has also been updated to cover
the infer_no_subs mode. The references for lots of other FATE tests
needed to be updated because of a newly added FlagDefault element with
value zero (whereas a FlagDefault with value 1 needn't be coded at all,
as it coincided with the default value of said element).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The Matroska specifications have evolved and now allow to mark
multiple tracks of the same kind as default (whether this was legal or
not before was dubious; e.g. mkvmerge disallowed it). Yet when the
Matroska muxer is set to infer default dispositions if absent, it also
enforced the now outdated restriction. So update this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The MOV muxer can store streamids as track ids but they aren't
visible when probing the result via lavf/dump or ffprobe due to
lack of this flag in the demuxer.
677a030b26 introduced more printable
side data types in ffprobe, however the Audio Service Type side data
'type' field that was introduced aliases an existing field of the same
name within the side data array, which can lead to JSON output like:
"side_data_list": [
{
"side_data_type": "Audio Service Type",
"type": 0
},
{
"side_data_type": "Stereo 3D",
"type": "side by side",
"inverted": 1
}
]
This, while technically valid JSON, is considered bad practice, since it
forces all downstream users to manually parse it and check all types;
it makes simple deserialization impossible. Worse, in som loosely
type languages, it can lead to silent bugs if exising code assumed
it was a different type.
As such, rename this second "type" field to "service_type".
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Adds schema validation for ffprobe XML output so that updating the
ffprobe.xsd file upon changes to ffprobe is not forgotten. This was
suggested by Marton Balint in:
http://ffmpeg.org/pipermail/ffmpeg-devel/2021-March/278428.html
The schema FATE test is only run if xmllint command is available.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
After fixing AV_PKT_DATA_SKIP_SAMPLES for reading vorbis packets from ogg,
the actual decoded samples become fewer. Three fate tests are failing:
fate-vorbis-20:
The samples in 6.ogg are not frame aligned. 6.pcm file was generated by
ffmpeg before the fix. After the fix, the decoded pcm file does not match
anymore. Ideally the ref file 6.pcm should be updated but it is probably
not worth it including another copy of the same file, only smaller.
SIZE_TOLERANCE is added for this test case.
fate-webm-dash-chapters:
The original vorbis_chapter_extension_demo.ogg is transmuxed to dash-webm.
The ref file webm-dash-chapters needs to be updated.
fate-vorbis-encode:
This exposes another bug in the vorbis encoder that initial_padding is not
correctly set. It is fixed in the previous patch.
Signed-off-by: Guangyu Sun <gsun@roblox.com>
Also use helper function to set the timestamp. Maybe we could also use
nanosecond precision, but there were some float rounding concerns.
Signed-off-by: Marton Balint <cus@passwd.hu>
Export them in UTC, not the local timezone. This way the output is
the same everywhere. The timezone information stored in the file is
still ignored, since there seems to be no simple way to export it
correctly.
Format them according to ISO 8601, which we generally use for exporting
dates.
Fixes fate-flv-demux, which was broken since
958bea5248 on some platforms.
There are no guarantees that all side data types have the same
representation on all platforms.
Tests that change output due to this:
id3v2-priv-remux, cover-art-mp3-id3v2-remux, gapless-mp3: SKIP_SAMPLES,
which is tested by fate-gapless-mp3-side-data
matroska-vp8-alpha-remux: MATROSKA_BLOCKADDITIONAL, which is tested by
remux itself (side data is written into output)
matroska-mastering-display-metadata: MASTERING_DISPLAY_METADATA and
CONTENT_LIGHT_LEVEL, which are tested by ffprobe invocation in the same
test
matroska-spherical-mono-remux: STEREO3D and SPHERICAL, which are tested
by ffprobe invocation in the same test
segment-mp4-to-ts: MPEGTS_STREAM_ID, which is tested by ts remuxing
tests
webm-webvtt-remux: WEBVTT_IDENTIFIER/SETTINGS, which is tested by the
ffprobe invocation in the same test
mxf-d10-user-comments: CPB_PROPERTIES, which is tested by mxf-probe-d10
mov-cover-image: SKIP_SAMPLES, which is tested for mov by
mov-aac-2048-priming
copy-trac3074: AUDIO_SERVICE_TYPE, which is tested by fate-hls-fmp4_ac3
Deprecated in ddef3d902f.
(The reference file of the mov-zombie test needed to be updated, because
a rotate metadata tag is no longer exported; the side-data is of course
still present.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Announced in 2e8b0446c6.
Two FATE-tests needed to be updated because the checksums of
side data containing an AVCPBProperties struct changed.
buffer_size has also been switched to 64bits because it is a bitsize.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The ASS margins are utilized to generate percentual values, as
the usage of cell-based sizing and offsetting seems to be not too
well supported by renderers.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
Attempts to utilize the TTML cell resolution as a mapping to the
reference resolution, and maps font size to cell size. Additionally
sets the display and text alignment according to the ASS alignment
number.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>