Currently AVBR is disabled and VBR is the default method if maxrate is
not specified on Linux, but AVBR is the default one if maxrate is not
specified on Windows. In order to make user experience better accross
Linux and Windows, use VBR by default on Windows if maxrate is not
specified. User need to set both avbr_accuracy and avbr_convergence to
non-zero explicitly and not to specify maxrate if AVBR is expected.
In addition, AVBR works for H264 and HEVC only in the SDK.
$ ffmpeg.exe -v verbose -f lavfi -i yuvtestsrc -vf "format=nv12" -c:v
vp9_qsv -f null -
If qsv hwdevice is available, use the mfxLoader handle in qsv hwdevice
to create mfx session. Otherwise create mfx session with a new mfxLoader
handle.
This is in preparation for oneVPL support
The following Cflags has been added to libmfx.pc, so mfx/ prefix is no
longer needed when including mfx headers in FFmpeg.
Cflags: -I${includedir} -I${includedir}/mfx
Some old versions of libmfx have the following Cflags in libmfx.pc
Cflags: -I${includedir}
We may add -I${includedir}/mfx to CFLAGS when running 'configure
--enable-libmfx' for old versions of libmfx, if so, mfx headers without
mfx/ prefix can be included too.
If libmfx comes without pkg-config support, we may do a small change to
the settings of the environment(e.g. set -I/opt/intel/mediasdk/include/mfx
instead of -I/opt/intel/mediasdk/include to CFLAGS), then the build can
find the mfx headers without mfx/ prefix
After applying this change, we won't need to change #include for mfx
headers when mfx headers are installed under a new directory.
This is in preparation for oneVPL support (mfx headers in oneVPL are
installed under vpl directory)
Using parameter from AVCodecContext to reset qsv codec is more suitable
for MFXVideoENCODE_Reset()'s usage. Per-frame metadata is more suitable
for the usage of mfxEncodeCtrl being passed to
MFXVideoENCODE_EncodeFrameAsync(). Now change it to use the value
from AVCodecContext.
Because q->param is passed to both "in" and "out" parameters when call
MFXVideoENCODE_Query(), the value in q->param may be changed. New
variables are added to store old configuration, so that we can detect
real parameter change.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
To do more accurate QP control, add min/max QP control on I/P/B frame
separately to qsv encoder. qmax and qmin still work but newly-added
options have higher priority.
Signed-off-by: Yue Heng <yue.heng@intel.com>
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
libmfx 1.28 was released 3 years ago, it is easy to get a greater
version than 1.28. We may remove lots of compile-time checks if adding
the requirement for the minimal version in the configure script.
Reviewed-by: softworkz <softworkz@hotmail.com>
Signed-off-by: Jean-Baptiste Kempf <jb@videolan.org>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
vp9, hevc, avc, mpeg2 QSV encoders inherit common list
of options (QSV_COMMON_OPTS) while bunch of options is not
actually supported by current qsv code. The only codec which
supportes everything is avc, followed by hevc, while vp9 and
mpeg2 significantly fall behind. This creates difficulties
for the users to use qsv encoders. This patch fixes options
list for encoders leaving only those which are actually
supported.
Signed-off-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Add intra refresh support to hevc_qsv as well.
Add an new intra refresh type: "horizontal", and an new param
ref_cycle_dist. This param specify the distance between the
beginnings of the intra-refresh cycles in frames.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Add transform_skip option to hevc_qsv. By enabling this option,
the transform_skip_enabled_flag in PPS will be set to 1.
This option is supported on the platform equal or newer than ICL.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Add low latency P-pyramid support to qsv. This feature relates to
command line option "-p_strategy". To enable this flag, user also
need to set "-bf" to 0. P-strategy has two modes "1-simple" and
"2-pyramid". The details of the two models refer to
https://github.com/Intel-Media-SDK/MediaSDK/blob/master/doc/mediasdk-man.md#preftype
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
Add dblk_idc option to 264_qsv and hevc_qsv. Turining on this opion can
disable deblocking.
Signed-off-by: Wenbin Chen <wenbin.chen@intel.com>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The SDK supports LowPower and non-LowPower modes, but some features are
available only under one of the two modes. Currently non-LowPower mode
is always chosen in FFmpeg if the mode is not set to LowPower
explicitly. User will experience some SDK errors if a LowPower related
feature is specified but the mode is not set to LowPower. With this
patch, the mode is set to unknown by default in FFmpeg, the SDK is able
to choose a workable mode for the specified features.
Reviewed-by: Soft Works <softworkz@hotmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Otherwise the color properties won't be encoded into the bitstream
header
Reviewed-by: Xiang, Haihao <haihao.xiang@intel.com>
Reviewed-by: Soft Works <softworkz@hotmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
All of these encoders can accept libmfx surfaces directly in a hardware
frames context, or they can accept software frames if a suitable device
is supplied to use.
Add -tile_rows and -tile_cols option to specify the number of tile rows
and columns for ICL+ (gen 11) platform.
A tile must wholly contain all the slices within it. Slices cannot cross
tile boundaries. So the slice number would be implicitly resized to the
max(nSlice, nTile).
Example:
ffmpeg -v verbose -hwaccel qsv -init_hw_device qsv=hw
-filter_hw_device hw -f rawvideo -s:v 1920x1080 -i ./input.nv12 -vf
format=nv12,hwupload=extra_hw_frames=64 -c:v hevc_qsv -tile_rows 2
-tile_cols 2 -slices 4 -y output.h265
Also dump the actual quantity of encoded tiled rows and columns in run
time.
Fix the enhancement #8400.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
1. must enable low_power mode since just VDENC can be supported by iHD
driver right now
2. Coding option1 and extra_data are not supported by MSDK
3. IVF header will be inserted in MSDK by default, but it is not needed
for FFmpeg, so disable it.
Signed-off-by: Zhong Li <zhongli_dev@126.com>
MSDK does not create internal acceleration device on Linux,
So MFXVideoCORE_SetHandle() is necessary.
It has been added for ff_qsv_init_session_device().
But missed for ff_qsv_init_internal_session() due to commit
1f26a23 overwrited commit db89f45Fix#7030
Signed-off-by: Zhong Li <zhong.li@intel.com>
GPB is the default type, just contains forward references but the
slice_type is B slice with higher encoding efficiency than regular P
slice, but lower performance.
Add an option to allow user to set regular P slice.
Fix ticket#6870
Test data on Intel Kabylake (i7-7567U CPU @ 3.50GHz):
1. ffmpeg -hwaccel qsv -c:v h264_qsv -i bbb_sunflower_1080p_30fps_normal.mp4 -vsync passthrough
-vframes 1000 -c:v hevc_qsv -gpb 0 -bf 0 -q 25 test_gpb_off_bf0_kbl.mp4
transcoding fps: 85
encoded file size of test_gpb_off_bf0_kbl.mp4: 21960100 (bytes)
2. ffmpeg -hwaccel qsv -c:v h264_qsv -i bbb_sunflower_1080p_30fps_normal.mp4 -vsync passthrough
-vframes 1000 -c:v hevc_qsv -gpb 1 -bf 0 -q 25 test_gpb_on_bf0_kbl.mp4
transcoding fps: 79
encoded file size oftest_gpb_on_bf0_kbl.mp4: 21211449 (bytes)
In this case, enable gpb can bring about 7% performance drop but 3.4% encoding efficiency improvment.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Always exposes low_power option for all qsv encoder, and reports a warning
if VDENC is not supported in current version of MSDK.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
There are many problems of current qsv trellis option:
1. Duplicated with AVCodecContext definition
2. MFX_TRELLIS_XXX is introduced by MSDK API 1.17
Currently Without MSDK API checking thus may cause compilation issue.
3. user is inclined to enable trellis when set "-trellis 1", but
actually it is to disable since MFX_TRELLIS_OFF is equal to 1.
4. It is too complex for user to enable trellis for every frame(I/P/B).
Just simply remove the private option, and switch to the AVCodecContext
definition. Compatibility should not a big problem (except can't exact map)
since the option name is same as AVCodecContext.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Reviewed-by: Moritz Barsnick <barsnick@gmx.net>
QVBR mode is to use the variable bitrate control algorithm
with constant quality.
mfxExtCodingOption3 should be supported to enable QVBR mode.
It is neccesary to specify a max_rate for QVBR, else it may be ICQ mode.
Example usage: ffmpeg -hwaccel qsv -c:v h264_qsv -i input.mp4 -c:v
h264_qsv -global_quality 25 -maxrate 2M test_qvbr.mp4 -v verbose
Clip QVBR quality range to be [0, 51] as Mark's commments.
It is similar to qp range of CQP but possibly should be updated when VP8/VP9
encoding can be supported.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Zhong Li <zhong.li@intel.com>
Add VDENC(lowpower mode) support for QSV H264
It's an experimental function(like lowpower in vaapi) with
some limitations:
- CBR/VBR require HuC which should be explicitly loaded via i915
module parameter(i915.enable_guc=2 for linux kernel version >= 4.16)
Use option "-low_power 1" to enable VDENC.
Add in dump_video_param() to show the status of VDENC in runtime log.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Zhong Li <zhong.li@intel.com>
RepeatPPS is enabled by default in mfx. It is not necessary mostly and
wasting encoding bits.
Add an option to control it and disable it by default.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Zhong Li <zhong.li@intel.com>
This option can be used to repect original input I/IDR frame type.
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Zhong Li <zhong.li@intel.com>
Add VDENC(lowpower mode) support for QSV h264 and HEVC
It's an experimental function(like lowpower in vaapi) with
some limitations:
- CBR/VBR require HuC which should be explicitly loaded via i915
module parameter(i915.enable_guc=2 for linux kerner version >= 4.16)
- HEVC VDENC was supported >= ICE LAKE
use option "-low_power 1" to enable VDENC.
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Add fix a memory leak issue as James's comments.
V2: use a local pict_type since coded_frame is deprecated.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Current implementations of qsv components incorrectly work with async level, they
actually try to work in async+1 level stepping into MFX_WRN_DEVICE_BUSY and polling
loop. This change address this misbehaviour.
Signed-off-by: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Maxym Dmytrychenko <maxim.d33@gmail.com>
Cc: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
1. vcm mode is only available for H264.
2. vcm is not supported on Linux, but it is shown when run "./avconv -h
encoder=h264_qsv |grep vcm". This shouldn't happen.
Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
MFX_LOOKAHEAD_DS_UNKNOWN means auto.
-1 is not a valid value.
Signed-off-by: Ruiling Song <ruiling.song@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
Wenbin Chen
Haihao Xiang
Yue Heng
Haihao Xiang
Dmitry Rogozhkin
He, Fan F
Anton Khirnov
Soft Works
Mark Thompson
Linjie Fu
Zhong Li
Zhong Li
Dmitry Rogozhkin
Timo Rothenpieler
Maxym Dmytrychenko
Ruiling Song