The only thing besides the hwaccel that this function uses from
AVCodecHWConfigInternal is the pixel format, which should always match
the hwaccel one.
Will be useful in following commits.
Decoders will currently warn if an audio decoder not marked with
AV_CODEC_CAP_SUBFRAMES consumes less than the whole packet, but
* this happens for regular files
* this has no negative consequences
* there is no meeaningful action that can or should be taken in response
The warning is thus useless noise.
These fields are supposed to store information about the packet the
frame was decoded from, specifically the byte offset it was stored at
and its size.
However,
- the fields are highly ad-hoc - there is no strong reason why
specifically those (and not any other) packet properties should have a
dedicated field in AVFrame; unlike e.g. the timestamps, there is no
fundamental link between coded packet offset/size and decoded frames
- they only make sense for frames produced by decoding demuxed packets,
and even then it is not always the case that the encoded data was
stored in the file as a contiguous sequence of bytes (in order for pos
to be well-defined)
- pkt_pos was added without much explanation, apparently to allow
passthrough of this information through lavfi in order to handle byte
seeking in ffplay. That is now implemented using arbitrary user data
passthrough in AVFrame.opaque_ref.
- several filters use pkt_pos as a variable available to user-supplied
expressions, but there seems to be no established motivation for using them.
- pkt_size was added for use in ffprobe, but that too is now handled
without using this field. Additonally, the values of this field
produced by libavcodec are flawed, as described in the previous
ffprobe conversion commit.
In summary - these fields are ill-defined and insufficiently motivated,
so deprecate them.
FFmpeg's assembly code currently does not abide by the
plattform-specific ABIs wrt its handling of the X86 MMX flag:
Resetting the MMX state is deferred to avoid doing it multiple times
instead of ensuring that the CPU is in floating point state
upon return from any function.
Furthermore, resetting said state is sometimes done generically,
namely for all the decoders using the ordinary decode callback;
yet this is not done for the decoders using the receive_frame API.
This led to problems when MJPEG (and the MJPEG-based decoders)
were switched to the receive_frame API in commit
e9a2a87773, because ff_mjpeg_decode_sos()
only resets the MMX state on success, not on failure.
Such issues are probably still possible with SMVJPEG, which still
uses the receive_frame API. See issue #10210.
This commit therefore also resets the MMX state for
the receive_frame API to avoid any more surprises of this sort.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is currently abused to store packet size, which breaks
AV_CODEC_FLAG_COPY_OPAQUE.
Use stream_index instead, which is unused in libavcodec and has the
same type as size.
Found-by: Martin Storsjö
Frame counters can overflow relatively easily (INT_MAX number of frames is
slightly more than 1 year for 60 fps content), so make sure we use 64 bit
values for them.
Also deprecate the old 32 bit frame_number attribute.
Signed-off-by: Marton Balint <cus@passwd.hu>
Use the opaque field instead to keep this value.
No functional change, but removes the hack that made the packet technically
invalid, allowing the safe usage of functions like av_packet_ref() on it
if required.
Signed-off-by: James Almer <jamrial@gmail.com>
The idea behind last_pkt_props was to store the properties of the last packet
fed to the decoder. Any sort of queueing required by CODEC_CAP_DELAY decoders
that consume several packets before they start outputting frames should be done
by the decoders in question. An example of this is libdav1d.
This is required for the following commits that will fix last_pkt_props in
frame threading scenarios, as well as maintain its contents during flush.
This revers commit 022a12b306.
Signed-off-by: James Almer <jamrial@gmail.com>
In particular, check the provided channel layout for encoders
without AVCodec.ch_layouts set. This fixes an infinite loop
in the WavPack encoder (and maybe other issues in other encoders
as well) in case the channel count is zero.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Implementation for the decode side of the ICC profile API, roughly
matching the behavior of the existing vf_iccdetect filter.
Closes: #9673
Signed-off-by: Niklas Haas <git@haasn.dev>
Handling this in general code makes more sense than handling it in
individual codec files, because it would be a lot of unnecessary code
duplication for the plenty of formats that support exporting ICC
profiles (jpg, png, tiff, webp, jxl, ...).
encode.c and decode.c will be in charge of initializing this state as
needed, so we merely need to make sure to uninit it afterwards from the
common destructor path.
Signed-off-by: Niklas Haas <git@haasn.dev>
The amount of padding samples reported by containers take into account the
extended samplerate in HE-AAC.
Fixes ticket #9671.
Signed-off-by: James Almer <jamrial@gmail.com>
The general decoding API uses bitstream filters and an AVFifo
and therefore AVCodecInternal contains pointers to an AVBSFContext
and to an AVFifo and lavc/internal.h includes lavc/bsf.h and
lavu/fifo.h.
Yet actually, only two files are supposed to use these, namely
avcodec.c and (mainly) decode.c. For all the other files,
it should be an opaque type that they should not touch and that
they need not know anything about. This can be achieved by not
including these headers and using the structs instead of the
corresponding typedefs.
This also forces translation units that really use the BSF
and the FIFO APIs themselves to include the relevant headers
directly instead of relying on indirect inclusions (up until now,
even avcodec.c and decode.c relied on fifo.h to be included
by internal.h).
Of course, it also avoids unnecessary rebuilds when bsf.h or fifo.h
change.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Several encoders (roqvideo, svq1, snow, and the mpegvideo family)
currently call ff_get_buffer(). However this function is written
assuming it is called by a decoder. Though nothing has been obviously
broken by this until now, that may change in the future.
To avoid potential future issues, introduce a simple encode-specific
wrapper around avcodec_default_get_buffer2() and enforce its use in
encoders.
This is possible, because every given FFCodec has to implement
exactly one of these. Doing so decreases sizeof(FFCodec) and
therefore decreases the size of the binary.
Notice that in case of position-independent code the decrease
is in .data.rel.ro, so that this translates to decreased
memory consumption.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This increases type-safety by avoiding conversions from/through void*.
It also avoids the boilerplate "AVSubtitle *sub = data;" line
for subtitle decoders. Its only downside is that it increases
sizeof(FFCodec), yet this can be more than offset lateron.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, codec.h contains both public and private parts
of AVCodec. This exposes the internals of AVCodec to users
and leads them into the temptation of actually using them
and forces us to forward-declare structures and types that
users can't use at all.
This commit changes this by adding a new structure FFCodec to
codec_internal.h that extends AVCodec, i.e. contains the public
AVCodec as first member; the private fields of AVCodec are moved
to this structure, leaving codec.h clean.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also move FF_CODEC_TAGS_END as well as struct AVCodecDefault.
This reduces the amount of files that have to include internal.h
(which comes with quite a lot of indirect inclusions), as e.g.
most encoders don't need it. It is furthemore in preparation
for moving the private part of AVCodec out of the public codec.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Since the request_channel_layout is used only by a handful of codecs,
move the option to codec private contexts.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: James Almer <jamrial@gmail.com>
They are incompatible with the new channel layout scheme and no decoder
uses them.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now, various subtitle decoders have not cleaned up
the AVSubtitle on error; this task must not be left to the user
because the documentation explicitly states that the AVSubtitle
"must be freed with avsubtitle_free if *got_sub_ptr is set"
(which it isn't on error).
Leaks happen upon failure in ff_ass_add_rect() or in
ass_decode_frame(); freeing generically also allows to remove
now redundant freeing code in pgssubdec and dvbsubdec.
While just at it, also reset got_sub_ptr generically on error.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Decoders implementing the receive_frame API currently mostly use
stack packets to temporarily hold the packet they receive from
ff_decode_get_packet(). This role directly parallels the role of
in_pkt, the spare packet used in decode_simple_internal for the
decoders implementing the traditional decoding API. Said packet
is unused by the generic code for the decoders implementing the
receive_frame API, so allow them to use it to fulfill the function
it already fulfills for the traditional API for both APIs.
There is only one caveat in this: The packet is automatically
unreferenced in avcodec_flush_buffers(). But this is actually
positive as it means the decoders don't have to do this themselves
(in case the packet is preserved between receive_frame calls).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Lynne
Anton Khirnov
James Almer
Andreas Rheinhardt
Marton Balint
Niklas Haas
Vittorio Giovara