Nothing prevents it to work except this check. AV1 is already supported
by Matroska muxer and aomenc produces WebM/AV1 files as well.
Signed-off-by: Kagami Hiiragi <kagami@genshiken.org>
Signed-off-by: James Almer <jamrial@gmail.com>
This is a temporary workaround for transcoding scenarious using libaom-av1
encoder, which currently can't propagate extradata during initialization.
Signed-off-by: James Almer <jamrial@gmail.com>
Make sure to not write forbidden OBUs to CodecPrivate, and do the same with
unnecessary OBUs for packets.
Signed-off-by: James Almer <jamrial@gmail.com>
If the API user doesn't set avg_frame_rate, matroskaenc will write the
current timebase as "default duration" for the video track. This makes
no sense, because the "default duration" implies the framerate of the
video. Since the timebase is forced to 1/1000, this will make the
resulting file claim 1000fps.
Drop it and don't write the element. It's optional, so it's better not
to write it if the framerate is unknown.
Strangely does not require FATE changes.
Prevents out of array accesses. Adressess ticket #6873
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
WebM supports a subset of elements from the Tags master.
See https://www.webmproject.org/docs/container/#tagging
Reviewed-by: Ivan Janatra <janatra@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>
WebM supports a subset of elements from the Chapters master.
See https://www.webmproject.org/docs/container/#chapters
Addresses ticket #6425
Reviewed-by: James Zern <jzern@google.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This adapts and merges commit f4bf236338
from libav, originally skipped in 13a211e632
as it was not necessary back then.
Is's applied now in preparation for the following patches, where the
aac_adtstoasc bitstream filter will start to correctly propagate the new
extradata through packet side data.
Signed-off-by: James Almer <jamrial@gmail.com>
The same warning is issued when actual unknown spherical metadata is
found further down in the function.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
ts_offset was added to cluster timecode, but then effectively subtracted
back off the block timecode
When setting initial_padding for an audio stream, the timestamps are
written incorrectly to the mkv file. cluster timecode gets written
as pts0 + ts_offset which is correct, but then block timecode gets
written as pts - cluster timecode which expanded is
pts - (pts0 + ts_offset). Adding cluster and block tc back together:
cluster + block = (pts0 + ts_offset) + (pts - (pts0 + ts_offset)) = pts
But the result should be pts + ts_offset since demux will subtract the
CodecDelay element from pts and set initial_padding to CodecDelay.
This patch gives the correct result.
When support for this was added the details weren't yet finalized.
This is no longer the case.
Fixes writing of mkv/webm files with HDR.
Reported-by: Kagami Hiiragi <kagami@genshiken.org>
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Reviewed-by: James Almer <jamrial@gmail.com>
The following three commits created a regression by writing initially
invalid mkv headers:
650e17d88b avformat/matroskaenc: write a
CRC32 element on Tags
3bcadf8227 avformat/matroskaenc: write a
CRC32 element on Info
ee888cfbe7 avformat/matroskaenc: postpone
writing the Tracks master
Symptoms:
- You can no longer playback a file that is still processed by ffmpeg,
e.g. VLC fails playback
- You can no longer stream a file to a client while if is still being
processed
- Various diagnosing tools show header errors or incomplete headers
(e.g. ffprobe, mediainfo, mkvalidator)
Note: The symptoms do not apply to completed files or ffmpeg runs that
were interrupted with 'q'
Cause:
The mentioned commits made changes in a way that some header elements
are only partially written in
mkv_write_header, leaving the header in an invalid state. Only in
mkv_write_trailer, these elements
are finished correctly, but that does only occur at the end of the
process.
Regression:
Before these commits were applied, mkv headers have always been valid,
even before completion of ffmpeg.
This has worked reliably over many versions of ffmpeg, to it was an
obvious regression.
Bugtracker:
This issue has been recorded as #5977 which is resolved by this patch
Patch:
The patch adds a new function 'end_ebml_master_crc32_preliminary' that
preliminarily finishes the ebml
element without destroying the buffer. The buffer can be used to update
the ebml element later during
mkv_write_trailer. But most important: mkv_write_header finishes with a
valid mkv header again.
Signed-off-by: James Almer <jamrial@gmail.com>
FLAC streams originating from the FLAC encoder send updated and more
complete STREAMINFO metadata as part of the last packet, so write that
to CodecPrivate instead of the incomplete one available in extradata
during init.
Signed-off-by: James Almer <jamrial@gmail.com>
FLAC streams originating from the FLAC encoder send updated and more
complete STREAMINFO metadata as part of the last packet, so write that
to CodecPrivate instead of the incomplete one available in extradata
during init.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
aac_adtstoasc makes the aac extradata available only after the first packet
is filtered, and as packet side data.
Assume extradata will be available as part of the first packet if
avpriv_mpeg4audio_get_config() fails the first time due to missing extradata
and reserve space for the OutputSampleRate element in the Tracks master.
Signed-off-by: James Almer <jamrial@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This avoids potential rounding errors and guarantees the source aspect
ratio is preserved.
Keep writing pixel values when Stereo 3D Mode is enabled and for WebM,
as the format doesn't support anything else.
This fixes ticket #5743, implementing the suggestion from ticket #5903.
Signed-off-by: James Almer <jamrial@gmail.com>
The dynamic buffer does not contain the CRC32 element so calls to avio_tell()
don't take it into account. This resulted in CueRelativePosition values being
six bytes short.
This is a regression since 6724525a15
Instead of adding yet another custom check for CRC32 to fix a size or an offset,
remove the existing ones and reserve the six bytes in the dynamic buffer.
Signed-off-by: James Almer <jamrial@gmail.com>
We don't currently support values 1 (centimeters), 2 (inches) or 3 (DAR),
only the default value 0 (pixels) which doesn't need to be written.
The fate refs are updated as unknown SAR is now signaled in the output
files with the addition of the new element.
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The spec says:
"Mandatory elements with a default value may be left out of the file. In the absence
of a mandatory element, the element's default value is used."
Reviewed-by: Hendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Paul B Mahol
Sigga Regina
James Almer
Kagami Hiiragi
wm4
Carl Eugen Hoyos
Aleksandr Slobodeniuk
Luca Barbato
Carl Eugen Hoyos
John Stebbins
Sasi Inguva
Rostislav Pehlivanov
softworkz
Rodger Combs
Adriano Pallavicino