Covers muxing from raw pcm audio input into FLAC, using several scalable layouts,
and demuxing the result.
Signed-off-by: James Almer <jamrial@gmail.com>
This can be used to run tests multple times, with e.g. differing
QEMU settings, by adding something like this to the FATE configuration
file:
target_exec="qemu-aarch64-static"
fate_targets="fate-checkasm fate-cpu"
fate_environments="sve128 sve256 sve512"
sve128_env="QEMU_CPU=max,sve128=on"
sve256_env="QEMU_CPU=max,sve256=on"
sve512_env="QEMU_CPU=max,sve512=on"
It's also possible to customize the target_exec command further
by injecting a sufficiently quoted variable into it, which then can
be updated for each run, e.g. target_exec="\$(CUR_EXEC_CMD)".
For each of the environment names in fate_environments, the tests
that are run get the name suffixed on the fate tests in the
test log and fate report, e.g. "fate-checkasm-h264dsp_sve128".
Signed-off-by: Martin Storsjö <martin@martin.st>
They were replaced by TX from libavutil; the tremendous work
to get to this point (both creating TX as well as porting
the users of the components removed in this commit) was
completely performed by Lynne alone.
Removing the subsystems from configure may break some command lines,
because the --disable-fft etc. options are no longer recognized.
Co-authored-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Adds a fate test for the jpegxl_anim demuxer, that should allow testing
for true positives and false positives for animated jpegxl files. Note
that two of the test cases are not animated, in order to help sort out
false positives.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Since this is an external encoder not under our control, we cannot test
the encoded output exactly as is done for internal encoders. We can
still test however that the output is decodable and produces the
expected number of frames with expected dimensions, pixel formats, and
timestamps.
Adds JPEG 2000 decoder tests using materials from the conformance suite specified in
Rec. ITU-T T.803 | ISO/IEC 15444-4.
The test materials are available at https://gitlab.com/wg1/htj2k-codestreams
Signed-off-by: Pierre-Anthony Lemieux <pal@palemieux.com>
These tests test both the demuxer as well as the muxer
wherever possible. It is not always possible due to the fact
that the muxer supports more codecs than the demuxer.
The spdif demuxer does currently not set the need_parsing flag.
If one were to set this to AVSTREAM_PARSE_FULL, the test results
would change as follows:
- For spdif-aac-remux, the packets are currently padded to 16bits,
i.e. if the actual packet size is odd, there is a padding byte.
The parser splits this byte away into a one byte packet of its own.
Insanely, these one byte packets get the same duration as normal
packets, i.e. timing is ruined.
- The DCA-remux tests get proper duration/timestamps.
- In the spdif-mp2-remux test the demuxer marks the stream as
being MP2; the parser sets it to MP3 and this triggers
the "Codec change in IEC 61937" codepath; this test therefore
returns only two packets with the parser.
- For spdif-mp3-remux some bytes end up in different packets:
Some input packets of this file have an odd length (417B instead
of 418B like all the other packets) and are padded to 418B.
Without a parser, all returned packets from the spdif-demuxer
are 418B. With a parser, the packets that were originally 417B
are 417B again, but the padding byte has not been discarded,
but added to the next packet which is now 419B.
This fixes "Multiple frames in a packet" warning and avoids
an "Invalid data found when processing input" error when decoding.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Lots of tests use the framecrc command together with some filters,
so adding a special function for it seems worthwhile. This commit
adds one new one and modifies an already existing one:
All users of FILTERDEMDEC already use framecrc and the more general
FILTERDEMDECENCMUX can be used in scenarios where more control over
the used encoders/muxers is needed, so use this in cases where
an actual input file is involved.
Furthermore, add FILTERFRAMECRC for the cases where no demuxing/decoding
occurs, because the input is generated via lavfi.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is unused and given that one needs an encoder to produce
packets from AVFrames (as output by filters) this is likely
to remain so, because FILTERDEMDECENCMUX is better for these
scenarios.
The only case where one can use filters without encoders is
with the lavfi input device: It outputs AVPackets which could
be copied without another conversion to AVFrames. Yet the variable
to check for this is CONFIG_LAVFI_INDEV, but FILTERDEMDECMUX
is designed to work with demuxers (i.e. CONFIG_*_DEMUXER).
So there is no usecase for FILTERDEMDECMUX.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Extend the ordinary mechanism to signal KEEP for this.
This also allows to remove the keep-parameter from enc_dec,
transcode and stream_remux, so that several empty parameters
'""' could be removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These tests have basically nothing to do with VPX (they do not even
require the decoder).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The tests in concatdec.mak reuse files created by tests
from lavf-container. Therefore these tests have the other tests
as prerequisite and mostly duplicate their CONFIG-requirements.
(The mxf_d10 tests did it incorrect as they only required
the MXF muxer.) This duplication is of course bad as usual,
so stop it by using the corresponding variable
that contains the non-lavf-container-tests that are enabled
to filter out all the concat-tests without a corresponding enabled
non-concat test.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Most of the tests in seek.mak use files created by other tests
as input. Therefore these tests have the other tests as prerequisite
and duplicate their CONFIG-requirements. This duplication is of course
bad as usual, so stop it by using the corresponding variable
that contains the non-seek-tests that are enabled to filter out all
the seek-tests without a corresponding enabled non-seek test.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Intended for scenarios that currently use DEMDEC, but are missing
the requirements that are implicitly needed by framecrc.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Add a parameter that allows to add additional requirements.
Also add FILE_PROTOCOL to all the auxiliary functions
that use a demuxer.
Also fix the requirements for the fate-mpegts-probe-(latm|program)
tests. They have misused DEMDEC.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Tests using the transcode and stream_remux functions have some common
requirements (namely the file and pipe protocols as well as the framecrc
muxer) and also other commonalities: The create a file and read it
immediately afterwards, so that they typically rely on a corresponding
muxer+demuxer pair which typically shares the same name; for transcode
(if it does not use stream copy) the same is true for encoders and
decoders. This means that using special Makefile-functions instead
of the general ALLYES is worthwhile. This commit adds such functions.
These functions allow to add arbitrary CONFIG-checks on top of the
aforementioned ones in order to satisfy special needs (for e.g. parsers,
filters) that several intended users have.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
They test libavfilter internal API, so they should be libavfilter
test programs (which implies: linked statically to libavfilter
to access internal APIs and linked normally (statically or dynamically
depending upon the build configuration) against all the other libs).
Right now, they are always linked statically against all libs,
which is a significant size waste compared to shared libs as all
of libavcodec has been pulled in despite not being really used.
This also leads to linking failures on systems for which av_export_avutil
is intended: libavcodec does not expect to be linked statically
against the library providing avpriv_(cga|vga16)_font in this case.
This is fixed by this commit.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Deprecated in c29038f304.
The resample filter based upon this library has been removed as well.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This is primarily intended to test that muxers correctly write chapters
or metadata; but given that it does this by having our demuxers read the
generated files, it also tests demuxers. And of course it may prove
useful for encoders, too.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, they were appended to the FATE_EXTERN-$(CONFIG_FFMPEG)
variable and were therefore activated when ffmpeg was enabled regardless
of whether ffprobe was enabled.
Also the same happened with FATE_SAMPLES_FASTSTART, although the
corresponding test (mov-faststart-4gb-overflow) only requires external
samples.
Furthermore, remove the unused FATE_FULL variable (FATE_EXTERN_FFPROBE has
taken its place).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When testing on a memory limited system, these tests consume a
significant amount of memory and can often fail if testing by running
multiple processes in parallel.
Signed-off-by: Martin Storsjö <martin@martin.st>
James Almer
Thilo Borgmann
Martin Storsjö
Cosmin Stejerean
Andreas Rheinhardt
Leo Izen
Anton Khirnov
Ting Fu
Pierre-Anthony Lemieux
Marton Balint
Michael Niedermayer
rcombs
Andreas Rheinhardt
Guo, Yejun
Carl Eugen Hoyos
Gyan Doshi
Diego Biurrun