It is a better place for it; no non-h263-based decoder needs
these functions any more (both H.261 and the error resilience
code recently stopped doing so).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is an MPEG-4-only value; it is always five for the MPEG-4
encoder, so just hardcode this value and move the MpegEncContext
field to Mpeg4DecContext.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The RV10 and RV20 decoders use ff_h263_decode_mb() and also the
H.263 DSP and VLCs. Despite not calling ff_h263_decode_frame(),
it is nevertheless beneficial to call ff_h263_decode_init()
to reduce code duplication.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, an initialized MpegEncContext had an array of
MPVPictures (way more than were ever needed) and the MPVPicture*
contained in the MPVWorkPictures as well as the input_picture
and reordered_input_picture arrays (for the encoder) pointed
into this array. Several of the pointers could point to the
same slot and because there was no reference counting involved,
one had to check for aliasing before unreferencing.
Furthermore, given that these pointers were not ownership pointers
the pointers were often simply reset without unreferencing
the slot (happened e.g. for the RV30 and RV40 decoders) or
there were moved without resetting the src pointer (happened
for the encoders where the entries in the input_picture
and reordered_input_picture arrays were not reset).
Instead actually releasing these pictures was performed by looping
over the whole array and checking which one of the entries needed
to be kept. Given that the array had way too many slots (36),
this meant that more than 30 MPVPictures have been unnecessarily
unreferenced in every ff_mpv_frame_start(); something similar
happened for the encoder.
This commit changes this by making the MPVPictures refcounted
via the RefStruct API. The MPVPictures itself are part of a pool
so that this does not entail constant allocations; instead,
the amount of allocations actually goes down, because the
earlier code used such a large array of MPVPictures (36 entries) and
allocated an AVFrame for every one of these on every
ff_mpv_common_init(). In fact, the pool is only freed when closing
the codec, so that reinitializations don't lead to new allocations
(this avoids having to sync the pool in update_thread_context).
Making MPVPictures refcounted also has another key benefit:
It makes it possible to directly share them across threads
(when using frame-threaded decoding), eliminating ugly code
with underlying av_frame_ref()'s; sharing these pictures
can't fail any more.
The pool is allocated in ff_mpv_decode_init() for decoders,
which therefore can fail now. This and the fact that the pool
is not unreferenced in ff_mpv_common_end() also necessitated
to mark several mpegvideo-decoders with the FF_CODEC_CAP_INIT_CLEANUP
flag.
*: This also means that there is no good reason any more for
ff_mpv_common_frame_size_change() to exist.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently identical to the H.261 and H.263 close functions
(which it replaces). It will be extended in future commits.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There are two types of MPVPictures: Three (cur_pic, last_pic, next_pic)
that are directly part of MpegEncContext and an array of MPVPictures
that are separately allocated and are mostly accessed via pointers
(cur|last|next)_pic_ptr; they are also used to store AVFrames in the
encoder (necessary due to B-frames). As the name implies, each of the
former is directly associated with one of the _ptr pointers:
They actually share the same underlying buffers, but the ones
that are part of the context can have their data pointers offset
and their linesize doubled for field pictures.
Up until now, each of these had their own references; in particular,
there was an underlying av_frame_ref() to sync cur_pic and cur_pic_ptr
etc. This is wasteful.
This commit changes this relationship: cur_pic, last_pic and next_pic
now become MPVWorkPictures; this structure does not have an AVFrame
at all any more, but only the cached values of data and linesize.
It also contains a pointer to the corresponding MPVPicture, establishing
a more natural relationsship between the two.
This already means that creating the context-pictures from the pointers
can no longer fail.
What has not been changed is the fact that the MPVPicture* pointers
are not ownership pointers and that the MPVPictures are part of an
array of MPVPictures that is owned by a single AVCodecContext.
Doing so will be done in a latter commit.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
current_picture->cur_pic, last_picture->last_pic, similarly
for new_picture and next_picture.
Also rename the corresponding *_ptr fields.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
They are not intended for decoders (for which there is the get_format
callback in case the user has a choice).
Also note that the list was wrong for MPEG4, because it did not contain
the high bit depth pixel formats used for studio profiles.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It has currently not been done for H263, H263P and MPEG4.
Doing so avoids having to initialize the IDCT permutation
lateron when decoding packets in order to be able to parse
a quant matrix; it means that every mpegvideo decoder always
has an initialized IDCTDSPContext after init.
Initializing is done generically in ff_mpv_decode_init().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Add a pointer parameter that if supplied will be used to return
the updated decode_error_flags. This will allow to fix several
races when using frame-threading; these resulted from AVFrame
that the earlier code updated concurrently being used as source
in an av_frame_ref() call in the decoder's update_thread_context.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This commit is the AVHWAccel analogue of commit
20f972701806be20a77f808db332d9489343bb78: It moves the private fields
of AVHWAccel to a new struct FFHWAccel extending AVHWAccel
in an internal header (namely hwaccel_internal.h).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The MPEG-4 decoder is the only decoder based upon H.263 that
supports quarterpel motion vectors.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The only thing from the H.263 decoder that is reachable
by the VC-1 decoder is ff_h263_decode_init(); but it does
not even use all of it; e.g. h263dsp is unused and so are
the VLCs initialized in ff_h263_decode_init() (they amount
to about 77KB which are now no longer touched).
Notice that one could also call ff_idctdsp_init()
directly instead of ff_mpv_idct_init(); one could even
do so in ff_vc1_init_common().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Decoders that might use quarter pixel motion estimation
(namely MPEG-4 as well as the VC-1 family) currently
use MpegEncContext.me.qpel_(put|avg) as scratch space
for pointers to arrays of function pointers.
(MotionEstContext contains such pointers as it supports
quarter pixel motion estimation.) The MotionEstContext
is unused apart from this for the decoding part of
mpegvideo.
Using the context at all is for decoding is actually
unnecessary and easily avoided: All codecs with
quarter pixels set me.qpel_avg to qdsp.avg_qpel_pixels_tab,
so one can just unconditionally use this in ff_mpv_reconstruct_mb().
MPEG-4 sets qpel_put to qdsp.put_qpel_pixels_tab
or to qdsp.put_no_rnd_qpel_pixels_tab based upon
whether the current frame is a b-frame with no_rounding
or not, while the VC-1-based decoders set it to
qdsp.put_qpel_pixels_tab unconditionally. Given
that no_rounding is always zero for VC-1, using
the same check for VC-1 as well as for MPEG-4 would work.
Since ff_mpv_reconstruct_mb() already has exactly
the right check (for hpeldsp), it can simply be reused.
(This change will result in ff_mpv_motion() receiving
a pointer to an array of NULL function pointers instead
of a NULL pointer for codecs without qpeldsp (like MPEG-1/2).
It doesn't matter.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It reduces typing: Before this patch, there were 105 codecs
whose long_name-definition exceeded the 80 char line length
limit. Now there are only nine of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Decoder-only, as the dimensions are set by the user when encoding.
Also fixup the other headers a bit while removing unnecessary internal.h
inclusions.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is done later in ff_mpv_frame_start() (and nobody uses
current_picture_ptr between setting it in ff_mpv_frame_start()).
(The reason the vsynth*-h263-obmc ref files change is because
the call to ff_find_unused_picture() now happens after the older
pictures have been unreferenced in ff_mpv_frame_start(),
so that their slots in the picture array can be immediately
reused; the obmc code is somehow buggy and changes its output
depending on the earlier contents of the motion_val buffer.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The msmpeg4 decoders/encoders share a common set of prerequisites,
ergo it makes sense to use common subsystems for them. This also
allows to remove the CONFIG_MSMPEG4_DECODER/ENCODER ad-hoc defines
(which violated the CONFIG_ namespace).
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible for most of the callers, because e.g. only
the MPEG-4 decoder can have bits_per_raw_sample > 8.
Also most mpegvideo-based codecs are 420 only.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
and remove FF_CODEC_CAP_INIT_THREADSAFE
All our native codecs are already init-threadsafe
(only wrappers for external libraries and hwaccels
are typically not marked as init-threadsafe yet),
so it is only natural for this to also be the default state.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible, because every given FFCodec has to implement
exactly one of these. Doing so decreases sizeof(FFCodec) and
therefore decreases the size of the binary.
Notice that in case of position-independent code the decrease
is in .data.rel.ro, so that this translates to decreased
memory consumption.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This increases type-safety by avoiding conversions from/through void*.
It also avoids the boilerplate "AVFrame *frame = data;" line
for non-subtitle decoders.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, codec.h contains both public and private parts
of AVCodec. This exposes the internals of AVCodec to users
and leads them into the temptation of actually using them
and forces us to forward-declare structures and types that
users can't use at all.
This commit changes this by adding a new structure FFCodec to
codec_internal.h that extends AVCodec, i.e. contains the public
AVCodec as first member; the private fields of AVCodec are moved
to this structure, leaving codec.h clean.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also move FF_CODEC_TAGS_END as well as struct AVCodecDefault.
This reduces the amount of files that have to include internal.h
(which comes with quite a lot of indirect inclusions), as e.g.
most encoders don't need it. It is furthemore in preparation
for moving the private part of AVCodec out of the public codec.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This avoids unnecessary rebuilds of most source files if only the
list of enabled components has changed, but not the other properties
of the build, set in config.h.
Signed-off-by: Martin Storsjö <martin@martin.st>
Also remove an unchecked av_frame_make_writable().
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This automatically makes the FLV, H.263, H.263+, Intel H.263,
MPEG-4, RealVideo 1.0 and RealVideo 2.0 decoders init-threadsafe.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Namely, skip some elements that are only useful for a decoder
when calling ff_mpeg4_decode_picture_header() from the MPEG-4 parser.
In particular, this ensures that the VLCs need no longer be
initialized by the parser.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is supported only by a few decoders (h263, h263p, mpeg(1|2|)video
and mpeg4) and is entirely redundant with parsers. Furthermore, using
it leads to missing frames, as flushing the decoder at the end does not
work properly.
Co-authored-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Andreas Rheinhardt
Michael Niedermayer
James Almer
Martin Storsjö
Anton Khirnov