This number is definitely required when frame threading is enabled, so
add it here rather than forcing all users to handle it themselves.
DXVA2 contained this addition in specific code as well (therefore being
added twice in the internal case) - just remove it from there.
This adds a new API, which allows the API user to query the required
AVHWFramesContext parameters. This also reduces code duplication across
the hwaccels by introducing ff_decode_get_hw_frames_ctx(), which uses
the new API function. It takes care of initializing the hw_frames_ctx
if needed, and does additional error handling and API usage checking.
Support for VDA and Cuvid missing.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This mode apparently does not support decoding of HEVC Main (8 bit).
With D3D11 and Intel drivers on Windows 10 I get green corruption, while
using DXVA2_ModeHEVC_VLD_Main works.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This mode apparently does not support decoding of HEVC Main (8 bit).
With D3D11 and Intel drivers on Windows 10 I get green corruption, while
using DXVA2_ModeHEVC_VLD_Main works.
Some devices (some phones, apparently) will support only this opaque
format. Of course this won't work with CLI, because copying data
directly is not supported.
Automatic frame allocation (setting AVCodecContext.hw_device_ctx) does
not support this mode, even if it's the only supported mode. But since
opaque surfaces are generally less useful, that's probably ok.
Merges Libav commit 5030e3856c.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Some existed since forever, some are new.
The cast in get_surface() is silly, but unless we change the av_log
function signature, or all callers of ff_dxva2_get_surface_index(), it's
needed to remove the const warning.
Merges Libav commit 752ddb4556.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Make supported codec profiles part of each dxva_modes entry. Every DXVA2
mode is representative for a codec with a subset of supported profiles,
so reflecting that in dxva_modes seems appropriate.
In practice, this will more strictly check MPEG2 profiles, will stop
relying on the surface format checks for selecting the correct HEVC
profile, and remove the verbose messages for mismatching H264/HEVC
profiles. Instead of the latter, it will now print the more nebulous "No
decoder device for codec found" verbose message.
This also respects AV_HWACCEL_FLAG_ALLOW_PROFILE_MISMATCH. Move the
Main10 HEVC entry before the normal one to make this work better.
Originally inspired by VLC's code.
Merges Libav commit 70e5e7c022.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This also adds support to avconv (which is trivial due to the new
hwaccel API being generic enough).
The new decoder setup code in dxva2.c is significantly based on work by
Steve Lhomme <robux4@gmail.com>, but with heavy changes/rewrites.
Merges Libav commit f9e7a2f95a.
Also adds untested VP9 support.
The check for DXVA2 COBJs is removed. Just update your MinGW to
something newer than a 5 year old release.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
I want to make it non-mandatory to set a mutex in the D3D11 device
context, and replacing it with user callbacks seems like the best
solution. This is preparation for it. Also makes the code slightly more
readable.
Merges Libav commit 831cfe10b4.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The actual hwaccel code will need to access an internal context instead
of avctx->hwaccel_context, so add a new DXVA_CONTEXT() macro, that will
dispatch between the "old" external and the new internal context.
Also, the new API requires a new D3D11 pixfmt, so all places which check
for the pixfmt need to be adjusted. Introduce a ff_dxva2_is_d3d11()
function, which does the check.
Merges Libav commit 4dec101acc.
Adds changes to vp9 over the Libav patch.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Some devices (some phones, apparently) will support only this opaque
format. Of course this won't work with CLI, because copying data
directly is not supported.
Automatic frame allocation (setting AVCodecContext.hw_device_ctx) does
not support this mode, even if it's the only supported mode. But since
opaque surfaces are generally less useful, that's probably ok.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Some existed since forever, some are new.
The cast in get_surface() is silly, but unless we change the av_log
function signature, or all callers of ff_dxva2_get_surface_index(), it's
needed to remove the const warning.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Make supported codec profiles part of each dxva_modes entry. Every DXVA2
mode is representative for a codec with a subset of supported profiles,
so reflecting that in dxva_modes seems appropriate.
In practice, this will more strictly check MPEG2 profiles, will stop
relying on the surface format checks for selecting the correct HEVC
profile, and remove the verbose messages for mismatching H264/HEVC
profiles. Instead of the latter, it will now print the more nebulous "No
decoder device for codec found" verbose message.
This also respects AV_HWACCEL_FLAG_ALLOW_PROFILE_MISMATCH. Move the
Main10 HEVC entry before the normal one to make this work better.
Originally inspired by VLC's code.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This also adds support to avconv (which is trivial due to the new
hwaccel API being generic enough).
The new decoder setup code in dxva2.c is significantly based on work by
Steve Lhomme <robux4@gmail.com>, but with heavy changes/rewrites.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
I want to make it non-mandatory to set a mutex in the D3D11 device
context, and replacing it with user callbacks seems like the best
solution. This is preparation for it. Also makes the code slightly more
readable.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The actual hwaccel code will need to access an internal context instead
of avctx->hwaccel_context, so add a new DXVA_CONTEXT() macro, that will
dispatch between the "old" external and the new internal context.
Also, the new API requires a new D3D11 pixfmt, so all places which check
for the pixfmt need to be adjusted. Introduce a ff_dxva2_is_d3d11()
function, which does the check.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
No need to loop through the known surfaces, we'll use the requested surface
anyway.
The loop is only done for DXVA2.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
No need to loop through the known surfaces, we'll use the requested surface
anyway.
The loop is only done for DXVA2.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The slice index expected by D3D11VA is the one from the texture not from the
array or texture/slices.
In VLC the slices we provide the decoder don't start from 0 and thus pictures
appear in bogus order. With possible crashes and corruptions when using an
invalid index.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The decoding buffer index expected by D3D11VA is the one from the
ID3D11Texture2D not the one from the ID3D11VideoDecoderOutputView array
in AVD3D11VAContext.
Otherwise, when providing decoder slices that do not start from 0,
pictures appear in bogus order. For an invalid index crashes and
image corruption can occur.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The assumption of (MPEG) Picture and H264Picture layout matching might
not hold true in the future.
Signed-off-by: Hendrik Leppkes <h.leppkes@gmail.com>
Most of the changes are just trivial are just trivial replacements of
fields from MpegEncContext with equivalent fields in H264Context.
Everything in h264* other than h264.c are those trivial changes.
The nontrivial parts are:
1) extracting a simplified version of the frame management code from
mpegvideo.c. We don't need last/next_picture anymore, since h264 uses
its own more complex system already and those were set only to appease
the mpegvideo parts.
2) some tables that need to be allocated/freed in appropriate places.
3) hwaccels -- mostly trivial replacements.
for dxva, the draw_horiz_band() call is moved from
ff_dxva2_common_end_frame() to per-codec end_frame() callbacks,
because it's now different for h264 and MpegEncContext-based
decoders.
4) svq3 -- it does not use h264 complex reference system, so I just
added some very simplistic frame management instead and dropped the
use of ff_h264_frame_start(). Because of this I also had to move some
initialization code to svq3.
Additional fixes for chroma format and bit depth changes by
Janne Grunau <janne-libav@jannau.net>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Hendrik Leppkes
Mark Thompson
wm4
Steve Lhomme
Diego Biurrun
Steve Lhomme
Vittorio Giovara
Martin Storsjö
Michael Niedermayer
Sam Lantinga
Anton Khirnov
Alex Converse
Jean-Baptiste Kempf
Mans Rullgard
Laurent Aimar