Based on the AOMedia Film Grain Synthesis 1 (AFGS1) spec:
https://aomediacodec.github.io/afgs1-spec/
The parsing has been changed substantially relative to the AV1 film
grain OBU. In particular:
1. There is the possibility of maintaining multiple independent film
grain parameter sets, and decoders/players are recommended to pick
the one most appropriate for the intended display resolution. This
could also be used to e.g. switch between different grain profiles
without having to re-signal the appropriate coefficients.
2. Supporting this, it's possible to *predict* the grain coefficients
from previously signalled parameter sets, transmitting only the
residual.
3. When not predicting, the parameter sets are now stored as a series of
increments, rather than being directly transmitted.
4. There are several new AFGS1-exclusive fields.
I placed this parser in its own file, rather than h2645_sei.c, since
nothing in the generic AFGS1 film grain payload is specific to T.35, and
to compartmentalize the code base.
Implementation copied wholesale from dav1d, sans SIMD, under permissive
license. This implementation was extensively verified to be bit-exact,
so it serves as a much better starting point than trying to re-engineer
this from scratch for no reason. (I also authored the original
implementation in dav1d, so any "clean room" implementation would end up
looking much the same, anyway)
The notable changes I had to make while adapting this from the dav1d
code-base to the FFmpeg codebase include:
- reordering variable declarations to avoid triggering warnings
- replacing several inline helpers by avutil equivalents
- changing code that accesses frame metadata
- replacing raw plane copying logic by av_image_copy_plane
Apart from this, the implementation is basically unmodified.
Common utility function that can be used by all codecs to select the
right (any valid) film grain parameter set. In particular, this is
useful for AFGS1, which has support for multiple parameters.
However, it also performs parameter validation for H274.
Not directly signalled by AV1, but we should still set this accordingly
so that users will know what the original intended video characteristics
and chroma resolution were.
Not directly signalled by AV1, but we should still set this accordingly
so that users will know what the original intended video characteristics
and chroma resolution were.
H.274 specifies that film grain parameters are signalled as intended for
4:4:4 frames, so we always signal this, regardless of the frame's actual
subsampling.
This is needed for AV1 film grain as well, when using AFGS1 streams.
Also add extra width/height and subsampling information, which AFGS1
cares about, as part of the same API bump. (And in principle, H274
should also expose this information, since it is needed downstream to
correctly adjust the chroma grain frequency to the subsampling ratio)
Deprecate the equivalent H274-exclusive fields. To avoid breaking ABI,
add the new fields after the union; but with enough of a paper trail to
hopefully re-order them on the next bump.
small cleanup for style, redundant semicolons, goto labels,
in FFmpeg, we put goto labels at brace level.
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Fixes: out of array access
Fixes: 67021/clusterfuzz-testcase-minimized-ffmpeg_DEMUXER_fuzzer-4883576579489792
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
avpkt->pos needs to be set for generic indexing or features such as the
stream_loop option will not work.
Co-authored-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: Leo Izen <leo.izen@gmail.com>
This will allow users to pass the Android ApplicationContext which is mandatory
to retrieve the ContentResolver responsible to resolve/open Android content URIS.
E.g. chromaprint expects to be fed 16bit signed PCM
in native endianness, yet there was no check for this.
Similarly for other muxers. Use the new
FF_OFMT_FLAG_ONLY_DEFAULT_CODECS to enfore this where
appropriate, e.g. for pcm/raw muxers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
AVOutputFormat has default codecs for audio, video and subtitle
and often these are the only codecs of this type allowed.
So add a flag to AVOutputFormat so that this can be checked generically.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Several muxers (e.g. pcm muxers) did not check the number
of streams even though the individual streams were not
recoverable from the muxed files. This commit changes
this by using the FF_OFMT_MAX_ONE_OF_EACH flag
where appropriate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
More exactly: Not more than one stream of each type for which
a default codec (i.e. AVOutputFormat.(audio|video|subtitle)_codec)
is set; for those types for which no such codec is set (or for
which no designated default codec in AVOutputFormat exists at all)
no streams are permitted.
Given that with this flag set the default codecs become more important,
they are now set explicitly to AV_CODEC_ID_NONE for "unset";
the earlier code relied on AV_CODEC_ID_NONE being equal to zero,
so that default static initialization set it accordingly;
but this is not how one is supposed to use an enum.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This test muxes two streams into a single pcm file, although
the two streams are of course not recoverable from the output
(unless one has extra information). So use the streamhash muxer
instead (which also provides coverage for it; it was surprisingly
unused in FATE so far). This is in preparation for actually
enforcing a limit of one stream for the PCM muxers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
If AVOutputFormat.video_codec, audio_codec or subtitle_codec
is AV_CODEC_ID_NONE, it means that there is no default codec
for this format and not that it is supported to mux AV_CODEC_ID_NONE.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also use sizeof of the proper type, namely sizeof(**sd)
and not sizeof(*sd).
Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
av_frame_side_data_get() has a const AVFrameSideData * const *sd
parameter; so calling it with an AVFramesSideData **sd like
AVCodecContext.decoded_side_data (or with a AVFramesSideData * const
*sd) is safe, but the conversion is not performed automatically
in C. All users of this function therefore resort to a cast.
This commit changes this: av_frame_side_data_get() is renamed
to av_frame_side_data_get_c(); furthermore, a static inline
wrapper for it name av_frame_side_data_get() is added
that accepts an AVFramesSideData * const * and converts this
to const AVFramesSideData * const * in a Wcast-qual safe way.
This also allows to remove the casts from the current users.
Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The latter need not be save, because av_log() expects
to get a pointer to an AVClass-enabled structure
and not only a fake object. If this function were actually
be called in the following way:
const AVClass *avcl = avctx->av_class;
handle_mdcv(&avcl, );
the AVClass's item_name would expect to point to an actual
AVCodecContext, potentially leading to a segfault.
Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This code uses the AVBPrint API for exactly one av_bprintf()
in a scenario in which a good upper bound for the needed
size of the buffer is available (with said upper bound being
much smaller than sizeof(AVBPrint)). So one can simply use
snprintf() instead. This also avoids the (always-false due to
the current size of the internal AVBPrint buffer) check for
whether the AVBPrint is complete.
Furthermore, the old code used AV_BPRINT_SIZE_AUTOMATIC
which implies that the AVBPrint buffer will never be
(re)allocated and yet it used av_bprint_finalize().
This has of course also been removed.
Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Niklas Haas
Jun Zhao
Michael Niedermayer
Anton Khirnov
Leo Izen
Wenbin Chen
Stefano Sabatini
Matthieu Bouron
Andreas Rheinhardt
Zhao Zhili