I went through all codecs and put them into five basic categories:
1. JPEG range only
2. MPEG range only
3. Explicitly tagged
4. Broken (codec supports both but encoder ignores tags)
5. N/A (headerless or pseudo-formats)
Filters in category 5 remain untouched. The rest gain an explicit
assignment of their supported color ranges, with codecs in category
4 being set to MPEG-only for safety.
It might be considered redundant to distinguish between 0 (category 5)
and MPEG+JPEG (category 3), but in doing so we effectively communicate
that we can guarantee that these tags will be encoded, which is distinct
from the situation where there are some codecs that simply don't have
tagging or implied semantics (e.g. rawvideo).
A full list of codecs follows:
JPEG range only:
- amv
- roqvideo
MPEG range only:
- asv1, asv2
- avui
- cfhd
- cljr
- dnxhd
- dvvideo
- ffv1
- flv
- h261, h263, h263p
- {h263,vp8}_v4l2m2m
- huffyuv, ffvhuff
- jpeg2000
- libopenjpeg
- libtheora
- libwebp, libwebp_anim
- libx262
- libxavs, libxavs2
- libxvid
- mpeg1video, mpeg2video
- mpeg2_qsv
- mpeg2_vaapi
- mpeg4, msmpeg4, msmpeg4v2, wmv1, wmv2
- mpeg4_omx
- prores, prores_aw, prores_ks
- rv10, rv20
- snow
- speedhq
- svq1
- tiff
- utvideo
Explicitly tagged (MPEG/JPEG):
- {av1,h264,hevc}_nvenc
- {av1,h264,hevc}_vaapi
- {av1,h264,hevc,vp8,vp9,mpeg4}_mediacodec
- {av1,h264,hevc,vp9}_qsv
- h264_amf
- {h264,hevc,prores}_videotoolbox
- libaom-av1
- libkvazaar
- libopenh264
- librav1e
- libsvtav1
- libvpx, libvpx-vp9
- libx264
- libx265
- ljpeg
- mjpeg
- vc2
Broken (encoder ignores tags):
- {av1,hevc}_amf
- {h264,hevc,mpeg4}_v4l2m2m
- h264_omx
- libxeve
- magicyuv
- {vp8,vp9,mjpeg}_vaapi
N/A:
- ayuv, yuv4, y41p, v308, v210, v410, v408 (headerless)
- pgmyuv (headerless)
- rawvideo, bitpacked (headerless)
- vnull, wrapped_avframe (pseudocodecs)
Makes it robust against adding fields before it, which will be useful in
following commits.
Majority of the patch generated by the following Coccinelle script:
@@
typedef AVOption;
identifier arr_name;
initializer list il;
initializer list[8] il1;
expression tail;
@@
AVOption arr_name[] = { il, { il1,
- tail
+ .unit = tail
}, ... };
with some manual changes, as the script:
* has trouble with options defined inside macros
* sometimes does not handle options under an #else branch
* sometimes swallows whitespace
Unnecessary since acf63d5350adeae551d412db699f8ca03f7e76b9;
also avoids relocations.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It reduces typing: Before this patch, there were 105 codecs
whose long_name-definition exceeded the 80 char line length
limit. Now there are only nine of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is in preparation of switching the default init-thread-safety
to a codec being init-thread-safe.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible, because every given FFCodec has to implement
exactly one of these. Doing so decreases sizeof(FFCodec) and
therefore decreases the size of the binary.
Notice that in case of position-independent code the decrease
is in .data.rel.ro, so that this translates to decreased
memory consumption.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, codec.h contains both public and private parts
of AVCodec. This exposes the internals of AVCodec to users
and leads them into the temptation of actually using them
and forces us to forward-declare structures and types that
users can't use at all.
This commit changes this by adding a new structure FFCodec to
codec_internal.h that extends AVCodec, i.e. contains the public
AVCodec as first member; the private fields of AVCodec are moved
to this structure, leaving codec.h clean.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is now set generically for all those encoders whose corresponding
AVCodecDescriptor has the AV_CODEC_PROP_INTRA_ONLY.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, ff_alloc_packet2() has a min_size parameter:
It is supposed to be a lower bound on the final size of the packet
to allocate. If it is not too far from the upper bound (namely,
if it is at least half the upper bound), then ff_alloc_packet2()
already allocates the final, already refcounted packet; if it is
not, then the packet is not refcounted and its data only points to
a buffer owned by the AVCodecContext (in this case, the packet will
be made refcounted in encode_simple_internal() in libavcodec/encode.c).
The goal of this was to avoid data copies and intermediate buffers
if one has a precise lower bound.
Yet those encoders for which precise lower bounds exist have recently
been switched to ff_get_encode_buffer() (which automatically allocates
final buffers), leaving only two encoders to actually set the min_size
to something else than zero (namely aliaspixenc and hapenc). Both of
these encoders use a very low lower bound that is not helpful in any
nontrivial case.
This commit therefore removes the min_size parameter as well as the
codepath in ff_alloc_packet2() for the allocation of final buffers.
Furthermore, the function has been renamed to ff_alloc_packet() and
moved to encode.h alongside ff_get_encode_buffer().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Given that the AVCodec.next pointer has now been removed, most of the
AVCodecs are not modified at all any more and can therefore be made
const (as this patch does); the only exceptions are the very few codecs
for external libraries that have a init_static_data callback.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Both are codec properties and not encoder capabilities. The relevant
AVCodecDescriptor.props flags exist for this purpose.
Signed-off-by: James Almer <jamrial@gmail.com>
Explicitly identify decoder/encoder wrappers with a common name. This
saves API users from guessing by the name suffix. For example, they
don't have to guess that "h264_qsv" is the h264 QSV implementation, and
instead they can just check the AVCodec .codec and .wrapper_name fields.
Explicitly mark AVCodec entries that are hardware decoders or most
likely hardware decoders with new AV_CODEC_CAPs. The purpose is allowing
API users listing hardware decoders in a more generic way. The proposed
AVCodecHWConfig does not provide this information fully, because it's
concerned with decoder configuration, not information about the fact
whether the hardware is used or not.
AV_CODEC_CAP_HYBRID exists specifically for QSV, which can have software
implementations in case the hardware is not capable.
Based on a patch by Philip Langdale <philipl@overt.org>.
Merges Libav commit 47687a2f8a.
Explicitly identify decoder/encoder wrappers with a common name. This
saves API users from guessing by the name suffix. For example, they
don't have to guess that "h264_qsv" is the h264 QSV implementation, and
instead they can just check the AVCodec .codec and .wrapper_name fields.
Explicitly mark AVCodec entries that are hardware decoders or most
likely hardware decoders with new AV_CODEC_CAPs. The purpose is allowing
API users listing hardware decoders in a more generic way. The proposed
AVCodecHWConfig does not provide this information fully, because it's
concerned with decoder configuration, not information about the fact
whether the hardware is used or not.
AV_CODEC_CAP_HYBRID exists specifically for QSV, which can have software
implementations in case the hardware is not capable.
Based on a patch by Philip Langdale <philipl@overt.org>.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
1. limit to single layer, as there is no current support for setting distortion/quality of multiple layers
2. encoder mode should be kept at default setting (0)
3. remove fixed_alloc parameter from context : seldom if ever used, and no way of properly configuring at the moment
4. add irreversible setting, to allow for lossless encoding. Set to OpenJPEG default (enabled)
5. set numresolution max to 33, which is the maximum number of allowed resolutions according the J2K spec
Signed-off-by: Michael Bradshaw <mjbshaw@google.com>
The calculation of width/height should round up, not round down to
prevent setting width or height to 0.
Also image->comps[compno].w is unsigned (at least in openjpeg2), so the
calculation could silently wrap around without the explicit cast to int.
Reviewed-by: Michael Bradshaw <mjbshaw@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
openjpeg 2 sets the data pointers of the image components to NULL,
causing segfaults if the image is reused.
Reviewed-by: Michael Bradshaw <mjbshaw@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Use check_lib2 to test the header together with the function. This is
necessary, because '-DOPJ_STATIC' changes what the included header does.
Also add '-DOPJ_STATIC' to CPPFLAGS, so that it isn't necessary to
hardcode this in libavcodec/libopenjpeg{dec,enc}.c.
Finally, check for non-static openjpeg 2.1, too.
Reviewed-by: Michael Bradshaw <mjbshaw@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This parameter can be used to inform the allocation code about how much
downsizing might occur, and can be used to optimize how to allocate the
packet
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Allocating coded_frame is what most encoders do anyway, so it makes
sense to always allocate and free it in a single place. Moreover a lot
of encoders freed the frame with av_freep() instead of the correct API
av_frame_free().
This bring uniformity to encoder behaviour and prevents applications
from erroneusly accessing this field when not allocated. Additionally
this helps isolating encoders that export information with coded_frame,
and heavily simplifies its deprecation.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
If opj_image_create fails to allocate an image it returns NULL, which
causes a segmentation fault at 'img->x0 = 0'.
Reviewed-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
libopenjpegenc crashes with "pointer being freed was not allocated" when threading
is enabled with:
ffmpeg -i tests/vsynth1/01.pgm -vcodec libopenjpeg file.j2k
this appears to be a bug in libopenjpeg
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
if the openjpeg parameter tcp_rates is not 0 ( using the ffmpeg compression_level option )
every 2nd image per thread is badly encoded. By moving the opj_setup_encoder function from
libopenjpeg_encode_init to libopenjpeg_encode_frame this can be prevented.
This fixes ticket #3754.
Signed-off-by: Jean First <jeanfirst@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The rationale is that you have a packed format in form
<greyscale sample> <alpha sample> <greyscale sample> <alpha sample>
and shortening greyscale to 'G' might make one thing about Greenscale instead.
An alias pixel format and color space name are provided for compatibility.
Niklas Haas
Anton Khirnov
Andreas Rheinhardt
Andreas Rheinhardt
James Almer
Carl Eugen Hoyos
wm4
Michael Bradshaw
Reino17
Aaron Boxer
Andreas Cadhalpun
Michael Niedermayer
Vittorio Giovara
Clément Bœsch
Diego Biurrun
Jean First
Carl Eugen Hoyos
Dave Rice
Michael Niedermayer
Nicolas George
Michael Bradshaw