Unnecessary since acf63d5350adeae551d412db699f8ca03f7e76b9;
also avoids relocations.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
C99/C11 6.3.2.3 5: "Any pointer type may be converted to an integer
type. [...] If the result cannot be represented in the integer type,
the behavior is undefined." So stop casting pointers to int; use
uintptr_t instead.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible now that the next-API is gone.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The option allows to select a specific window instead of the whole
screen.
Reviewed-by: Andriy Gelman <andriy.gelman@gmail.com>
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
av_gettime_relative() is using the monotonic clock therefore more suitable for
elapsed time calculations. Packet timestamps are still kept absolute, although
that should be configurable in the future.
Related to ticket #9089.
Signed-off-by: Marton Balint <cus@passwd.hu>
xserver defines the endianness of the grabbed images. Use this information
to set the correct pixel format.
This also fixes format selection in configuration depth=32/bpp=32 with
xserver on a little endian machine. Before the patch, the big endian
layout 0RGB was always selected which is incorrect because BGR0 should
be used. RGB24 was also incorrectly assumed (but this format was removed
in xserver 1.20).
The big-endian settings can be tested using docker+qemu from a little-endian
machine:
$ docker run --rm --privileged multiarch/qemu-user-static --reset -p yes
$ docker run --rm -it -v /tmp:/tmp powerpc64/debian /bin/bash
In docker container
$ apt-get update
$ apt-get install xvfb
$ apt-get install x11-apps
To test AV_PIX_FMT_0RGB32
$ Xvfb :2 -screen 0 720x480x24 &
$ export DISPLAY=:2
$ xclock -geometry 720x480 -bg green #test different colors
On your host machine grab the frames using the following
command. View output to check that colors are rendered correctly
$ ./ffmpeg -y -f x11grab -i :2.0 -codec:v mpeg2video out.mp4
Other pixel formats can be tested by modifying how Xvfb is started in the docker
container:
AV_PIX_FMT_RGB565
$ Xvfb :2 -screen 0 720x480x16
AV_PIX_FMT_RGB555
$ Xvfb :2 -screen 0 720x480x15
AV_PIX_FMT_BGR24 / AV_PIX_FMT_RGB24
This is difficult to test because bpp=24 support was removed in xserver 1.20
https://lists.x.org/archives/xorg-devel/2018-February/056175.html?hmsr=joyk.com&utm_source=joyk.com&utm_medium=referral
However, I was able to run previous version of Xvfb (with some
modifications to force 24bpp) to check that images are rendered correctly.
Reviewed-by: Carl Eugen Hoyos <ceffmpeg@gmail.com>
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
This patch adds a select_region option to the xcbgrab input device.
If set to 1, the user will be prompted to select the grabbing area
graphically by clicking and dragging. A rectangle will be drawn to
mark the grabbing area. A single click with no dragging will select
the whole screen. The option overwrites the video_size, grab_x, and
grab_y options if set by the user.
For testing, just set the select_region option as follows:
ffmpeg -f x11grab -select_region 1 -i :0.0 output.mp4
The drawing happens directly on the root window using standard rubber
banding techniques, so it is very efficient and doesn't depend on any
X extensions or compositors.
Reviewed-by: Andriy Gelman <andriy.gelman@gmail.com>
Signed-off-by: Omar Emara <mail@OmarEmara.dev>
Fixes#7312, segmentation fault on close of X11 server
xcb_query_pointer_reply() and xcb_get_geometry_reply() can return NULL
if e.g. the X server closes or the connection is lost. This needs to
be checked in order to cleanly exit, because the returned pointers are
dereferenced later.
Signed-off-by: Moritz Barsnick <barsnick@gmx.net>
Reviewed-by: Andriy Gelman <andriy.gelman@gmail.com>
Also by wrapping the SHM buffer in an AVBufferRef we eliminate yet another
possible memcpy improving performance.
Signed-off-by: Marton Balint <cus@passwd.hu>
There is a calculation error in xcbgrab_reposition() that breaks
vertical repositioning on follow_mouse. It made the bottom
reposition occur when moving the mouse lower than N pixels after
the capture bottom edge, instead of before.
This commit fixes the calculation to match the documentation.
follow_mouse: centered or number of pixels. The documentation says:
When it is specified with "centered", the grabbing region follows
the mouse pointer and keeps the pointer at the center of region;
otherwise, the region follows only when the mouse pointer reaches
within PIXELS (greater than zero) to the edge of region.
The framework will allocate a buffer and copy the data to it,
that takes time. But it avoids constently creating and
destroyng the shared memory segment, and that saves more time.
On my setup,
from ~200 to ~300 FPS at full screen (1920×1200),
from ~1400 to ~3300 at smaller size (640×480),
similar to legacy x11grab and confirmed by others.
Plus, shared memory segments are a scarce resource,
allocating potentially many is a bad idea.
Note: if the application were to drop all references to the
buffer before the next call to av_read_frame(), then passing
the shared memory segment as a refcounted buffer would be
even more efficient, but it is hard to guarantee, and it does
not happen with the ffmpeg command-line tool. Using a small
number of preallocated buffers and resorting to a copy when
the pool is exhausted would be a solution to get the better
of both worlds.
Currently, AVStream contains an embedded AVCodecContext instance, which
is used by demuxers to export stream parameters to the caller and by
muxers to receive stream parameters from the caller. It is also used
internally as the codec context that is passed to parsers.
In addition, it is also widely used by the callers as the decoding (when
demuxer) or encoding (when muxing) context, though this has been
officially discouraged since Libav 11.
There are multiple important problems with this approach:
- the fields in AVCodecContext are in general one of
* stream parameters
* codec options
* codec state
However, it's not clear which ones are which. It is consequently
unclear which fields are a demuxer allowed to set or a muxer allowed to
read. This leads to erratic behaviour depending on whether decoding or
encoding is being performed or not (and whether it uses the AVStream
embedded codec context).
- various synchronization issues arising from the fact that the same
context is used by several different APIs (muxers/demuxers,
parsers, bitstream filters and encoders/decoders) simultaneously, with
there being no clear rules for who can modify what and the different
processes being typically delayed with respect to each other.
- avformat_find_stream_info() making it necessary to support opening
and closing a single codec context multiple times, thus
complicating the semantics of freeing various allocated objects in the
codec context.
Those problems are resolved by replacing the AVStream embedded codec
context with a newly added AVCodecParameters instance, which stores only
the stream parameters exported by the demuxers or read by the muxers.
Incidentally `-y` also collides with avconv global options.
Update x11grab to match and document the option.
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
The feature is implemented using a transparent window and drawing
inside it a rectangle filling the whole window to highlight it.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Fixes trac ticket #4164
This is to address an error when using show_region, which would cause part of the captured area to become static.
It looks like the rectangle specifying the capture area was relative to the capture window.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Old versions of libxcb do not provide xcb_shape_rectangles().
The issue can be fixed differently but this small change fixes
some fate platforms and a user reported compilation problem.
Reported and tested by trac user kevmitch.
Fixes ticket #4067.
Andreas Rheinhardt
James Almer
sgerwk
Marton Balint
Andriy Gelman
Omar Emara
Moritz Barsnick
Kusanagi Kouichi
Octavio Alvarez
Diego Biurrun
Nicolas George
Anton Khirnov
Ganesh Ajjanagadde
Vittorio Giovara
Luca Barbato
Daniel Moran
Michael Niedermayer
Carl Eugen Hoyos
Boris Reisig