RIP, if exists is the last KLV item in the MXF files therefore we can stop
parsing the file if it is encountered. This allows us to support files created by
broken muxers such as OpenCube MXFTk Advanced 2.8.0.0.1. which dumps some extra
garbage after the RIP.
Signed-off-by: Marton Balint <cus@passwd.hu>
Current log messages talk about 'suitable' output formats. This is
confusing, because it suggests that some formats are suitable, while
others are not, which is not the case.
Also, suggest possible user actions when format cannot be guessed from a
filename.
An uninitialized AVFormatContext instance with neither iformat nor
oformat set will currently log as 'NULL', which is confusing and
unhelpful. Print 'AVFormatContext' instead, which provides more
information.
This happens e.g. if choosing an output format fails in
avformat_alloc_output_context2().
E.g. with the following commandline:
ffmpeg -i <input> -f foobar -y /dev/null
before: [NULL @ 0x5580377834c0] Requested output format 'foobar' is not a suitable output format
after: [AVFormatContext @ 0x55fa15bb34c0] Requested output format 'foobar' is not a suitable output format
3GPP TS 26.244 Table 8.10 specifies that longitude is written before
latitude. The MOV demuxer already expects the correct order. So, write
them in that order.
However, the user supplied string may also be used in MOV mode which
requires ISO 6709 format which specifies latitude first. The demuxer
also exports the loci value in that format. So parser adjusted as well.
When writing a subtitle SSA/ASS subtitle file, the AVCodecParameters::extradata
buffer is written directly to the output. In the case where the buffer is
filled from a matroska source file produced by some older versions of
Handbrake, this buffer ends with a null terminating character, which is then
erroneously copied into the middle of the output file. The change here avoids
this problem by treating it as a string rather than a raw buffer. This way it
is agnostic as to whether the source buffer was null terminated or not.
Fixes ticket #10203.
Reported-by: Tim Angus <tim at ngus.net>
Signed-off-by: Marton Balint <cus@passwd.hu>
Previously, the ff_configure_buffers_for_index function had
upper sanity limits of 16 MB (1<<24) for buffer_size and
8 MB (1<<23) for short_seek_threshold.
However, if the index contained entries with a much larger
delta, setting pos_delta to a value larger than the sanity
limit, we would end up not increasing the buffer size at all.
Instead, ignore the individual deltas that are excessive, but
increase the buffer size based on the deltas that are below the
sanity limit.
Only count deltas that are below 1<<23, 8 MB; pos_delta gets doubled
before setting the buffer size - this matches the previous maximum
buffer size of 1<<24, 16 MB.
This can happen e.g. with a mov file with some tracks containing
some samples that belong in the start of the file, at the end of
the mdat, while the rest of the file is mostly reasonably interleaved;
previously those samples caused the maximum pos_delta to skyrocket,
skipping any buffer size enlargement.
Signed-off-by: Martin Storsjö <martin@martin.st>
When scanning through the index, account for the fact that the
compared samples may be located in an unexpected order in the file;
this function is mainly interested in the absolute difference between
file locations.
Signed-off-by: Martin Storsjö <martin@martin.st>
Some additional properties are set for ARIB caption.
* need_parsing = 0
ARIB caption doesn't require any parser.
This avoids "parser not found" warning message.
* need_context_update = 1
When any profiles are changed, set this flag to notify.
Signed-off-by: rcombs <rcombs@rcombs.me>
According to MXF specs the Stored Rectangle corresponds to the data which is
passed to the compressor and received from the decompressor, so they should
contain the width / height extended to the macroblock boundary.
In practice however width and height values rounded to the upper 16 multiples
are only seen when muxing MPEG formats. Therefore this patch changes stored
width and height values to unrounded for all non-MPEG formats, even macroblock
based ones.
For DNXHD the specs (ST 2019-4) explicitly indicates to use 1080 for 1088p.
For ProRes the specs (RDD 44) only refer to to ST 377-1 without precision but
no known commercial implementations are using rounded values.
DV is not using 16x16 macroblocks, so 16 rounding makes no sense.
The patch also fixes Sampled Width / Display Width to use unrounded values.
Signed-off-by: Marton Balint <cus@passwd.hu>
Add the appropriate descriptors to the MPEG-TS demux and mux to
ensure that SMPTE 2038 VANC streams are properly preserved
when using codec copy (including adding the appropriate PMT
descriptors).
The focus of this patch is TS input to TS output. A separate
patch adds support for output of 2038 VANC over decklink SDI.
Thanks to Marton Balint for feedback to preserve ABI compatibility.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
The original code would strip off the PTS/DTS of any packets
which had a stream ID of STREAM_ID_PRIVATE_STREAM_1. While the
intent was to apply this to asynchronous KLV packets, it was
being applied to any codec that had that same stream ID (including
types such as SMPTE 2038).
Add a clause to the if() statement to ensure it only gets applied
if the codec actually is KLV.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
ipcm is defined by ISO/IEC 23003-5, not defined by quicktime. After
adding ISO/IEC 23003-5 support, we don't need it for ticket #9219.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
svg is xml, but <?xml is not required,
it can start with <svg and can have multiple empty lines,
or start with <!-- include some comments,
but must first line if start with <?xml.
Signed-off-by: Wang Yaqiang <wangyaqiang03@kuaishou.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
The path attribute in the Set-Cookie header is optional but treated by ffmpeg as being compulsory.
Signed-off-by: Michael J. Walsh <mjfwalsh@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
As per 23003-5:2020, the rest of the bits are reserved, and thus
in the future they may be utilized for something else.
Quote:
format_flags is a field of flags that modify the default PCM sample format.
Undefined flags are reserved and shall be zero. The following flag is defined:
0x01 indicates little-endian format. If not present, big-endian format is used.
When hls_init_time should available when hls_list_size > 0.
Because the list will not refresh new top line segment when hls_list_size is 0
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Fixes: division by zero
Fixes: 55940/clusterfuzz-testcase-minimized-ffmpeg_IO_DEMUXER_fuzzer-6333107679920128
The decoder does not support bps=1 and i have no such sample so it is not
known if this duration is correct. Alternatively we could error out on all
bps we currently do not support on the decoder side or not set duration.
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 9223372036854775584 + 536870912 cannot be represented in type 'long'
Fixes: 55844/clusterfuzz-testcase-minimized-ffmpeg_dem_MOV_fuzzer-510613920664780
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Current mpegtsenc code only inserts SPS/PPS from extradata before IDR frames if
AUD is also inserted.
Unfortunately some encoders may preface a key frame with an AUD, but no
SPS/PPS. In that case current code does not repeat the "extradata" and the
resulting HLS stream may become noncompliant and unjoinable.
Fix this by always inserting SPS/PPS and moving AUD to the beginning of the
packet if it is already present.
Fixes ticket #10148.
Signed-off-by: Marton Balint <cus@passwd.hu>
FLV spec only has AVC end of sequence tag, and the EOS tag has a
CodecID as other video data packet. MPEG4 doesn't conformance to
the spec, but it's there for a decade. So only 'fix' the EOS tag
rather than remove it completely.
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
ISOBMFF (14496-12) made this field ('channelcount') in the
AudioSampleEntry structure non-template¹ somewhere before the
release of the 2022 edition. As for ETSI TS 126 244 AKA 3GPP
file format (V16.1.0, 2020-10), it does not seem contain any
references limiting the channelcount entry in AudioSampleEntry
or in its own definition of EVSSampleEntry.
fate-mov-mp4-chapters test had to be adjusted as it output a
mono vorbis stream, which would now be properly marked as such
in the container.
1: As per 14496-12:
Fields shown as “template” in the box descriptions are fields
which are coded with a default value unless a derived
specification defines their use and permits writers to use
other values than the default.
Marton Balint
James Almer
Anton Khirnov
Gyan Doshi
Martin Storsjö
jackarain
rcombs
TADANO Tokumei
Jerome Martinez
Devin Heitmueller
Jun Zhao
Tong Wu
Zhao Zhili
Wang Yaqiang
asivery
Michael J. Walsh
Jan Ekström
Steven Liu
Michael Niedermayer
Pierre-Anthony Lemieux
John Coiner
Paul B Mahol