We parse the fallback cHRM on decode and correctly determine that we
have BT.709 primaries, but unknown TRC. This causes us to write cICP
where we shouldn't. Primaries without transfer can be handled entirely
by cHRM, so we should only write cICP if we actually know the transfer
function.
Additionally, we should avoid writing cICP if there's an ICC profile
because the spec says decoders must prioritize cICP over the ICC
profile.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Since many distributions ship libjxl 0.7.0 still, we'd still prefer to
compile against that, but don't want to lose the features that require
libjxl 0.8.0 or greater. For this reason I've added preprocessor #ifdef
guards around the features that aren't necessarily in libjxl 0.7.0.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
From x86inc:
> On AMD cpus <=K10, an ordinary ret is slow if it immediately follows either
> a branch or a branch target. So switch to a 2-byte form of ret in that case.
> We can automatically detect "follows a branch", but not a branch target.
> (SSSE3 is a sufficient condition to know that your cpu doesn't have this problem.)
x86inc can automatically determine whether to use REP_RET rather than
REP in most of these cases, so impact is minimal. Additionally, a few
REP_RETs were used unnecessary, despite the return being nowhere near a
branch.
The only CPUs affected were AMD K10s, made between 2007 and 2011, 16
years ago and 12 years ago, respectively.
In the future, everyone involved with x86inc should consider dropping
REP_RETs altogether.
libjxl only accepts 16-bit buffers with its API, but it can
accept 9-bit to 15-bit input via a 16-bit buffer, provided the flag
is set declaring the buffer to be of the respective significant depth.
Likewise, it can only provide pixel data on decode as a 16-bit buffer
(if higher than 8) but does provide the metadata tagging the actual bit
depth.
This commit causes libjxlenc.c and libjxldec.c to respect this metadata
and tag/read it accordingly from AVCodecContext->bits_per_raw_sample.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
mfenc sets FF_CODEC_CAP_INIT_CLEANUP, so calling mf_close() on
failure inside mf_init() results in a double-free.
Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Hyper Encode uses Intel integrated and discrete graphics on one system
to accelerate encoding of a single video stream.
Depending on the selected parameters and codecs, performance gain on AlderLake iGPU + ARC Gfx up to 1.6x.
More information: https://www.intel.co.uk/content/www/uk/en/architecture-and-technology/adaptix/deep-link.html
Developer guide: https://github.com/oneapi-src/oneVPL-intel-gpu/blob/main/doc/HyperEncode_FeatureDeveloperGuide.md
Hyper Encode is supported only on Windows and requires D3D11 and oneVPL.
To enable Hyper Encode need to specify:
-Hyper Encode mode (-dual_gfx on or dual_gfx adaptive)
-Encoder: h264_qsv or hevc_qsv
-BRC: VBR, CQP or ICQ
-Lowpower mode (-low_power 1)
-Closed GOP for AVC or strict GOP for HEVC -idr_interval = 0 used by default
Depending on the encoding parameters, the following parameters may need
to be adjusted:
-g recommended >= 30 for better performance
-async_depth recommended >= 30 for better performance
-extra_hw_frames recommended equal to async_depth value
-bf recommended = 0 for better performance
In the cases with fast encoding (-preset veryfast) there may be no
performance gain due to the fact that the decode is slower than the encode.
Command line examples:
ffmpeg.exe -init_hw_device qsv:hw,child_device_type=d3d11va,child_device=0 -v verbose -y -hwaccel qsv -extra_hw_frames 60 -async_depth 60 -c:v h264_qsv -i bbb_sunflower_2160p_60fps_normal.mp4
-async_depth 60 -c:v h264_qsv -preset medium -g 60 -low_power 1 -bf 0 -dual_gfx on output.h265
Signed-off-by: galinart <artem.galin@intel.com>
This is intended to be a more convenient replacement for
reordered_opaque.
Add support for it in the two encoders that offer
AV_CODEC_CAP_ENCODER_REORDERED_OPAQUE: libx264 and libx265. Other
encoders will be supported in future commits.
Some encoders (ffv1, flac, adx) are marked with AV_CODEC_CAP_DELAY onky
in order to be flushed at the end, otherwise they behave as no-delay
encoders.
Add a capability to mark these encoders. Use it for setting pts
generically.
bink supports 16x16 blocks in chroma planes thus we need to allocate enough.
Fixes: out of array access
Fixes: 55026/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_BINK_fuzzer-6013915371012096
Reviewed-by: Peter Ross <pross@xvid.org>
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Andreas Rheinhardt
Gyan Doshi
Leo Izen
Paul B Mahol
Anton Khirnov
Lynne
Cameron Gutman
galinart
David Rosca
Michael Niedermayer