It has been added in 3a87ac948f,
but there was never an implementation different from the ordinary
dct_quantize of it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It has been added in a579db0c4f
due to XvMC, but today it is only used to swap U and V
for VCR2, a MPEG-2 variant with U and V swapped.
This can be done in a simpler fashion, namely by simply
swapping the U and V pointers of the corresponding
MPVWorkPictures.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, an initialized MpegEncContext had an array of
MPVPictures (way more than were ever needed) and the MPVPicture*
contained in the MPVWorkPictures as well as the input_picture
and reordered_input_picture arrays (for the encoder) pointed
into this array. Several of the pointers could point to the
same slot and because there was no reference counting involved,
one had to check for aliasing before unreferencing.
Furthermore, given that these pointers were not ownership pointers
the pointers were often simply reset without unreferencing
the slot (happened e.g. for the RV30 and RV40 decoders) or
there were moved without resetting the src pointer (happened
for the encoders where the entries in the input_picture
and reordered_input_picture arrays were not reset).
Instead actually releasing these pictures was performed by looping
over the whole array and checking which one of the entries needed
to be kept. Given that the array had way too many slots (36),
this meant that more than 30 MPVPictures have been unnecessarily
unreferenced in every ff_mpv_frame_start(); something similar
happened for the encoder.
This commit changes this by making the MPVPictures refcounted
via the RefStruct API. The MPVPictures itself are part of a pool
so that this does not entail constant allocations; instead,
the amount of allocations actually goes down, because the
earlier code used such a large array of MPVPictures (36 entries) and
allocated an AVFrame for every one of these on every
ff_mpv_common_init(). In fact, the pool is only freed when closing
the codec, so that reinitializations don't lead to new allocations
(this avoids having to sync the pool in update_thread_context).
Making MPVPictures refcounted also has another key benefit:
It makes it possible to directly share them across threads
(when using frame-threaded decoding), eliminating ugly code
with underlying av_frame_ref()'s; sharing these pictures
can't fail any more.
The pool is allocated in ff_mpv_decode_init() for decoders,
which therefore can fail now. This and the fact that the pool
is not unreferenced in ff_mpv_common_end() also necessitated
to mark several mpegvideo-decoders with the FF_CODEC_CAP_INIT_CLEANUP
flag.
*: This also means that there is no good reason any more for
ff_mpv_common_frame_size_change() to exist.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There are two types of MPVPictures: Three (cur_pic, last_pic, next_pic)
that are directly part of MpegEncContext and an array of MPVPictures
that are separately allocated and are mostly accessed via pointers
(cur|last|next)_pic_ptr; they are also used to store AVFrames in the
encoder (necessary due to B-frames). As the name implies, each of the
former is directly associated with one of the _ptr pointers:
They actually share the same underlying buffers, but the ones
that are part of the context can have their data pointers offset
and their linesize doubled for field pictures.
Up until now, each of these had their own references; in particular,
there was an underlying av_frame_ref() to sync cur_pic and cur_pic_ptr
etc. This is wasteful.
This commit changes this relationship: cur_pic, last_pic and next_pic
now become MPVWorkPictures; this structure does not have an AVFrame
at all any more, but only the cached values of data and linesize.
It also contains a pointer to the corresponding MPVPicture, establishing
a more natural relationsship between the two.
This already means that creating the context-pictures from the pointers
can no longer fail.
What has not been changed is the fact that the MPVPicture* pointers
are not ownership pointers and that the MPVPictures are part of an
array of MPVPictures that is owned by a single AVCodecContext.
Doing so will be done in a latter commit.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Specifically, add const to the pointed-to-type of pointers
that point to something static or that belong to last_pic
or next_pic (because modifying these might lead to data races).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
No mpegvideo based codec supports alpha.
While just at it, also make the define shorter.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
current_picture->cur_pic, last_picture->last_pic, similarly
for new_picture and next_picture.
Also rename the corresponding *_ptr fields.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This avoids constant allocations+frees and will also allow
to simply switch to the RefStruct API, thereby avoiding
the overhead of the AVBuffer API.
It also simplifies the code, because it removes the "needs_realloc"
field: It was added in 435c0b87d2,
before the introduction of the AVBuffer API: given that these buffers
may be used by different threads, they were not freed immediately
and instead were marked as being freed later by setting needs_realloc.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For the intra_[hv]_scantables, only ScanTable.permutated
is used, so one only needs to keep that.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is only used by gmc/gmc1 which is only used by the MPEG-4
decoder, so move it to Mpeg4DecContext and rename it
to Mpeg4VideoDSP. Also compile it iff the MPEG-4 decoder is compiled.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This has the advantage of not having to check for whether
a given MpegEncContext is actually a decoder or an encoder
context at runtime.
To do so, mpv_reconstruct_mb_internal() is moved into a new
template file that is included by both mpegvideo_enc.c
and mpegvideo_dec.c; the decoder-only code (mainly lowres)
are also moved to mpegvideo_dec.c. The is_encoder checks are
changed to #if IS_ENCODER in order to avoid having to include
headers for decoder-only functions in mpegvideo_enc.c.
This approach also has the advantage that it is easy to adapt
mpv_reconstruct_mb_internal() to using different structures
for decoders and encoders (e.g. the check for whether
a macroblock should be processed for the encoder or not
uses MpegEncContext elements that make no sense for decoders
and should not be part of their context).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These fields are only ever set by the encoder for the current picture
and for no other picture. So only one set of these values needs to
exist, so move them to MpegEncContext.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These tables are only used by encoders and only for the current picture;
ergo they need not be put into the picture at all, but rather into
the encoder's context. They also don't need to be refcounted,
because there is only one owner.
In contrast to this, the earlier code refcounts them which
incurs unnecessary overhead. These references are not unreferenced
in ff_mpeg_unref_picture() (they are kept in order to have something
like a buffer pool), so that several buffers are kept at the same
time, although only one is needed, thereby wasting memory.
The code also propagates references to other pictures not part of
the pictures array (namely the copy of the current/next/last picture
in the MpegEncContext which get references of their own). These
references are not unreferenced in ff_mpeg_unref_picture() (the
buffers are probably kept in order to have something like a pool),
yet if the current picture is a B-frame, it gets unreferenced
at the end of ff_mpv_encode_picture() and its slot in the picture
array will therefore be reused the next time; but the copy of the
current picture also still has its references and therefore
these buffers will be made duplicated in order to make them writable
in the next call to ff_mpv_encode_picture(). This is of course
unnecessary.
Finally, ff_find_unused_picture() is supposed to just return
any unused picture and the code is supposed to work with it;
yet for the vsynth*-mpeg4-adap tests the result depends upon
the content of these buffers; given that this patchset
changes the content of these buffers (the initial content is now
the state of these buffers after encoding the last frame;
before this patch the buffers used came from the last picture
that occupied the same slot in the picture array) their ref-files
needed to be changed. This points to a bug somewhere (if one removes
the initialization, one gets uninitialized reads in
adaptive_quantization in ratecontrol.c).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also constify the corresponding code in mpegvideo.c that handles
lowres.
(Unfortunately, not everything that is const could be constified:
ref_picture could be made const uint8_t* const* if C allowed the
safe automatic conversion from uint8_t**; and pix_op, qpix_op
could be made to point to const function pointers, but C's handling
of const in pointers to arrays is broken.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible for most of the callers, because e.g. only
the MPEG-4 decoder can have bits_per_raw_sample > 8.
Also most mpegvideo-based codecs are 420 only.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This commit removes the ineffective FF_MPV_DEPRECATED_ options,
namely mpeg_quant (this is only an option for MPEG-4), a53cc
(this is only an option for MPEG-2), force_duplicated_matrix
(applies only to MJPEG) and b_strategy, b_sensitivity and brd_scale
(these options only make sense for encoders supporting B-frames,
which currently means the MPEG-1/2 and MPEG-4 encoders).
Given that these options never changed the outcome of encoding,
they are removed at once.
Notice that the options for the encoders for which it made sense
are not affected by this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is currently a "Picture", an mpegvideo-specific type
that has a lot of baggage, all of which is unnecessary
for new_picture, because only its embedded AVFrame
is ever used. So just use an ordinary AVFrame.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
MpegEncContext is used by many different codecs and
every one of these uses just a subset of its fields.
If one tries to separate this and e.g. add a real MpegContext
and extension structures (say MpegDecContext and MpegEncContext),
one runs into two difficulties:
a) Some code is shared between decoder and encoder of
the same format and they therefore use the same contexts,
either MpegEncContext itself or identical extensions thereof.
The latter is the case for H.261 as well as WMV2.
b) In case of slice threading, the generic code can only allocate
and initialize the structure it knows about; right now this is
an MpegEncContext. If the codec has an even more extensive structure,
it is only available for the main thread's MpegEncContext.
Fixing this would involve making ff_mpv_common_init() aware
of the size the size of slice context to allocate and would be
part of separating the main thread's context from the slice contexts
in general.
This commit only intends to tackle the first issue by adding
a pointer to MpegEncContext that codecs can set to a common
context so that the aforementioned codecs can use this context
(together with the MpegEncContext) in their common code.
This will allow to move fields only used by the main thread
to more specialized contexts.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
An offset has the advantage of not needing to be updated
when the buffer is reallocated. Furthermore, the way the pointer
is currently updated is undefined behaviour in case the pointer
is not already set (i.e. when not encoding MPEG-1/2), because
it calculates the nonsense NULL - s->pb.buf.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible now that dealing with the Simple Studio Profile
has been moved to mpeg4videodec.c. It also allows to avoid
allocations, because one can simply put the required buffers
on the context (if one made these buffers part of MpegEncContext,
the memory would be wasted for every codec other than MPEG-4).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Andreas Rheinhardt
James Almer
Michael Niedermayer
Anton Khirnov