The fate-run.sh shell script exports LC_ALL=C before invoking the
test executables; this is probably done for consistency.
When executing Windows binaries with Wine, it normally handles
UTF-8 command line parameters just fine - but with LC_ALL set to
C, it treats them as plain ASCII.
As the unicode command line parameters wasn't the main thing
being tested here, just convert them to plain ASCII, for
portability. This fixes the test for all test configurations that
use Wine.
Signed-off-by: Martin Storsjö <martin@martin.st>
Provides coverage for the code transforming the ALAC extradata.
Also set creation_time metadata to test this, too.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Extend the ordinary mechanism to signal KEEP for this.
This also allows to remove the keep-parameter from enc_dec,
transcode and stream_remux, so that several empty parameters
'""' could be removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Peeking into the muxing queue can improve the estimate of
the lowest timestamp needed for avoid_negative_ts in case
the lowest timestamp is in a packet other than the first packet
to be muxed.
This fixes tickets #4536 and #5784 as well as the output from
the matroska-avoid-negative-ts FATE-test.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
write_packet() has code to shift the packets timestamps
to make them nonnegative or even make them start at ts zero;
this code inspects every packet that is written and if a packet
with negative timestamp (whether this is dts or pts depends upon
another flag; basically: Matroska uses pts, everyone else dts)
is encountered, this is offset to make the timestamp zero.
All further packets will be offset accordingly (with the offset
converted according to the streams' timebases).
This is based around an assumption, namely that the timestamps
are indeed non-decreasing, so that the first packet with negative
timestamps is the first packet with timestamps. This assumption
is often fulfilled given that the default interleavement function
by default interleaves per dts; yet there are scenarios in which
it may not be fulfilled:
a) av_write_frame() instead of av_interleaved_write_frame() is used.
b) The audio_preload option is used.
c) When the timestamps that are made nonnegative/zero are pts
(i.e. with Matroska), because the packet with the smallest dts
is not necessarily the packet with the smallest pts.
d) Possibly with custom interleavement functions.
In these cases the relative sync of the first few packet(s) is offset
relative to the later packets. This contradicts the documentation
("When shifting is enabled, all output timestamps are shifted by
the same amount").
Therefore this commit changes this: As soon as the first packet
with valid timestamps is output, it is checked and recorded whether
the timestamps need to be shifted. Further packets are no longer
checked for needing to be offset; instead they are simply offset.
In the cases above this leads to packets with negative timestamps
(and the appropriate warnings) instead of desync. This will mostly
be fixed in the next commit.
This commit also factors handling the avoid_negative_ts stuff out
of write_packet() in order to be able to return immediately.
Tickets #4536 and #5784 as well as the matroska-avoid-negative-ts-test
are examples of c); as has been said, some timestamps are now negative,
yet the ref file update does not show it because ffmpeg.c sanitizes
the timestamps (-copyts disables it; ffprobe and mkvinfo also show
the original timestamps).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This tests the issue from tickets #4536, #5784;
the output of this test is currently broken.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Tests the parsing and writing of AVDOVIDecoderConfigurationRecord,
when it is present as a Dolby Vision configuration block addition mapping.
Signed-off-by: quietvoid <tcChlisop0@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is similar to the faststart option of the mov muxer, yet
in contrast to it it works together with reserve_index_space
(the equivalent to reserved_moov_size): If the reserved space
does not suffice, the data is shifted; if not, the Cues are
written at the front without shifting the data.
Several tests that cover (not only) this have been added.
Implements #7017.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, the Matroska muxer did not use the dispositions it is
given as-is; instead it by default overrode the disposition of the first
track of a kind (audio, video, subtitles) if no track of this kind has
the default disposition set. And up until recently, it also enforced
by default that no more than one track of each kind be marked as
default.
The rationale for the former is that there are lots of containers which
lack the concept of default streams, so that it is not uncommon for no
stream to be marked as default at all; the rationale for the latter was
that up until recently, it was dubious whether the Matroska specification
allowed more than one default stream for track type (e.g. mkvmerge
disallowed it). It was this point which led to the implementation of
the above mentioned behaviour inspired by mkvmerge.
Yet the Matroska specifications have changed and now explicitly allow
to set more than one track of each type as default, so that the main
reason of not using the dispositions as-is was rendered moot. Therefore
this commit changes the default to pass the disposition through.
The matroska-mpegts-remux FATE-test has been updated to still use the
old "infer" mode so that it is still covered by FATE; the
matroska-zero-length-block test has also been updated to cover
the infer_no_subs mode. The references for lots of other FATE tests
needed to be updated because of a newly added FlagDefault element with
value zero (whereas a FlagDefault with value 1 needn't be coded at all,
as it coincided with the default value of said element).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Specifically test that the WebVTT flavour is correctly mapped to
the Matroska/WebM CodecID and back; and test that dispositions
unsupported by WebM are discarded even when they would be supported
by Matroska.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This provides coverage for writing BlockGroups with BlockAdditional
and ReferenceBlock elements. It also tests setting the hearing impaired
disposition (it fits given that this video has no audio so one needs to
be able to read lips to understand anything).
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The FATE suite already contains a file containing mastering display
and content light level metadata: Meridian-Apple_ProResProxy-HDR10.mxf
This file is used to test both the Matroska muxer and demuxer.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Also, test modifying colorspace properties and the default_mode
passthrough which is used here to create a file that has no default
track at all.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It furthermore tests the demuxer's handling of chained SeekHeads,
level 1-elements after the Clusters and the muxer's capability of
writing huge TrackNumbers as well as expanding the Cues' length field
by one byte if necessary to fill the reserved space. It also tests
propagation of metadata.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The Matroska muxer writes the Chapters early when chapters were already
available when writing the header; in this case any tags pertaining to
these chapters get written, too.
Yet if no chapters had been supplied before writing the header, Chapters
can also be written when writing the trailer if any are supplied. Tags
belonging to these chapters were up until now completely ignored.
This commit changes this: Writing the tags belonging to chapters has
been moved to mkv_write_chapters(). If mkv_write_tags() has not been
called yet (i.e. when chapters are written when writing the header),
the AVIOContext for writing the ordinary Tags element is used, but not
output, as this is left to mkv_write_tags() in order to only write one
Tags element. Yet if mkv_write_tags() has already been called,
mkv_write_chapters() will output a Tags element of its own which only
contains the tags for chapters.
When chapters are available initially, the corresponding tags will now
be the first tags in the Tags element; but the ordering of tags in Tags
is irrelevant anyway.
This commit also makes chapter_id_offset local to mkv_write_chapters()
as it is used only there and not reused at all.
Potentially writing a second Tags element means that the maximum number
of SeekHead entries had to be incremented. All the changes to FATE
result from the ensuing increase in the amount of space reserved for the
SeekHead (21 bytes more).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
We won't be able to seek back to write the actual duration anyway.
FATE-tests using the md5pipe command had to be updated due to this change.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Moreover, putting the Cues in front of the Clusters by reserving space
in advance is also tested.
The new capability of using ffprobe during a remux/transcode test are
used here for information about the chapters.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Using random values for TrackUID and FileUID (as happens when the
AVFMT_FLAG_BITEXACT flag is not set) has the obvious downside of making
the output indeterministic. This commit mitigates this by writing the
potentially random values with a fixed size of eight byte, even if their
actual values would fit into less than eight bytes. This ensures that
even in non-bitexact mode, the differences between two files generated
with the same settings are restricted to a few bytes in the header.
(Namely the SegmentUID, the TrackUIDs (in Tracks as well as when
referencing them via TagTrackUID), the FileUIDs (in Attachments as
well as in TagAttachmentUID) as well as the CRC-32 checksums of the
Info, Tracks, Attachments and Tags level-1-elements.) Without this
patch, there might be an offset/a size difference between two such
files.
The FATE-tests had to be updated because the fixed-sized UIDs are also
used in bitexact mode.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
containing updated extradata, in this case a new FLAC streaminfo.
Furthermore, it also tests that the Matroska muxer is able to preserve
uncommon channel layouts by adding Vorbis comments to the CodecPrivate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
mkvmerge versions 6.2 to 40.0 had a bug that made it not propagate the
WavPack extradata (containing the WavPack version) during remuxing from
a Matroska file; currently our demuxer would treat every WavPack block
encountered as invalid data (unless the WavPack stream is to be
discarded (i.e. the streams discard is >= AVDISCARD_ALL)) and try to
resync to the next level 1 element.
Luckily, the WavPack version is currently not really important; so we
fix this problem by assuming a version. David Bryant, the creator of
WavPack, recommended using version 0x410 (the most recent version) for
this. And this is what this commit does.
A FATE-test for this has been added.
Reviewed-by: David Bryant <david@wavpack.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until e7ddafd5, the Matroska muxer wrote two SeekHeads: One at the
beginning referencing the main level 1 elements (i.e. not the Clusters)
and one at the end, referencing the Clusters. This second SeekHead was
useless and has therefore been removed. Yet the SeekHead-related
functions and structures are still geared towards this usecase: They
are built around an allocated array of variable size that gets
reallocated every time an element is added to it although the maximum
number of Seek entries is a small compile-time constant, so that one should
rather include the array in the SeekHead structure itself; and said
structure should be contained in the MatroskaMuxContext instead of being
allocated separately.
The earlier code reserved space for a SeekHead with 10 entries, although
we currently write at most 6. Reducing said number implied that every
Matroska/Webm file will be 84 bytes smaller and required to adapt
several FATE tests; furthermore, the reserved amount overestimated the
amount needed for for the SeekHead's length field and how many bytes
need to be reserved to write a EBML Void element, bringing the total
reduction to 89 bytes.
This also fixes a potential segfault: If !mkv->is_live and if the
AVIOContext is initially unseekable when writing the header, the
SeekHead is already written when writing the header and this used to
free the SeekHead-related structures that have been allocated. But if
the AVIOContext happens to be seekable when writing the trailer, it will
be attempted to write the SeekHead again which will lead to segfaults
because the corresponding structures have already been freed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When a Matroska Block is only stored in compressed form, the size of
the uncompressed block is not explicitly coded and therefore not known
before decompressing it. Therefore the demuxer uses a guess for the
uncompressed size: The first guess is three times the compressed size
and if this is not enough, it is repeatedly incremented by a factor of
three. But when this happens with lzo, the decompression is neither
resumed nor started again. Instead when av_lzo1x_decode indicates that x
bytes of input data could not be decoded, because the output buffer is
already full, the first (not the last) x bytes of the input buffer are
resent for decoding in the next try; they overwrite already decoded
data.
This commit fixes this by instead restarting the decompression anew,
just with a bigger buffer.
This seems to be a regression since 935ec5a1.
A FATE-test for this has been added.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This test tests that demuxing ProRes that is muxed like it should be in
Matroska (i.e. with the first header ("icpf") atom stripped away) works;
it also tests bz2 decompression as well as the handling of
unknown-length clusters.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
contained in Vorbis comments in the CodecPrivate of flac tracks.
Moreover, it also tests header removal compression.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This test contains a track with zlib compressed CodecPrivate in addition
to compressed frames; the former was unchecked before.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Steven Liu
Anton Khirnov
James Almer
Andreas Rheinhardt
Martin Storsjö
quietvoid
Gyan Doshi
Andreas Rheinhardt