For muxers, the internal AVCodecContext is basically unused
except in avformat_transfer_internal_stream_timing_info()
(which sets time_base and ticks_per_frame) and
av_stream_get_codec_timebase() (a getter for time_base).
This makes ticks_per_frame write-only, so don't set it.
Also remove an always-false check for the AVCodecContext's
codec_tag.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
info level will be too noisy if several instances of the decoder are fired
at the same time, as will be the case with tiled AVIF.
Signed-off-by: James Almer <jamrial@gmail.com>
info level will be too noisy if several instances of the decoder are fired
at the same time, as will be the case with tiled AVIF.
Signed-off-by: James Almer <jamrial@gmail.com>
If the number of CTUs reduces between one picture and the next, the
slice_idx table is reduced in size in the frame_context_for_each_tl call
on vvcdec.c:321. When initialising the slice_idx table on vvcdec.c:325,
the old code uses fc->tab.sz.ctu_count when calculating the table size.
fc->tab.sz.ctu_count holds the old ctu count at this point however, not
being updated to hold the new ctu count until vvcdec.c:342. This causes
an out-of-bounds write.
Patch fixes the problem by using pps->ctb_count, which was just used
when allocating the table, in place of fc->tab.sz.ctu_count when
initialising the table.
Signed-off-by: Frank Plowman <post@frankplowman.com>
Instead of overriding the frame properties in fill_picture(), advertise
the supported YUV colorspace and range at format negotiation time. (The
correct metadata will now be set automatically by ff_get_video_buffer)
This makes all ff_draw_* based filters aware of YUV colorspaces and
ranges. Needed for YUVJ removal. Also fixes a bug where e.g. vf_pad
would generate a limited range background even after conversion to
full-scale grayscale.
The FATE changes were a consequence of the aforementioned bugfix - the
gray scale files are output as full range (due to conversion by
libswscale, which hard-codes gray = full), and appropriately tagged as
such, but before this change the padded version incorrectly used
a limited range (16) black background for these formats.
libjxl doesn't support negative strides, but JPEG XL has an orientation
flag inside the codestream. We can use this to work around the library
limitation, by taking the absolute value of the negative row stride,
sending the image up-side-down, and telling the library that the image
has a vertical-flip orientation.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Once it became fully non-transparent and service of shady practices
behind closed doors, I can not be here any more.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Currently, when writing PCMA or PCMU tracks with FLV or RTMP, the
stereo flag and sample rate flag inside RTMP audio messages are
overridden, making impossible to distinguish between mono and stereo
tracks. This patch fixes the issue by restoring the same flag mechanism
of all other codecs, that takes into consideration the right channel
count and sample rate.
Signed-off-by: Alessandro Ros <aler9.dev@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Distinguish between a decoder being entirely missing and a decoder which
requires features which are not present in the incomplete implementation
in libavcodec and therefore can't be used.
Yadif filter assumed that the output timebase is always half of the input
timebase. This is not true if halving the input time base is not representable
as an AVRational causing the output timestamps to be invalidly scaled in such a
case.
So let's use av_reduce instead of av_mul_q when calculating the output time
base and if the conversion is inexact then let's fall back to the original
timebase which probably makes more parctical sense than using x/INT_MAX.
Fixes invalidly scaled pts_time values in this command line:
ffmpeg -f lavfi -i testsrc -vf settb=tb=1/2000000000,yadif,showinfo -f null none
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes parsing small timebases from expressions (where the expression API
converts the result to double), like in this command line:
ffprobe -f lavfi -i testsrc=d=1,settb=1/2000000000 -show_streams -show_entries stream=time_base
Before the patch timebase was parsed as 1/1999999999.
Signed-off-by: Marton Balint <cus@passwd.hu>
The current criterion is to check for the existence of
update_thread_context. Change this to check for whether
we are actually decoding VP8 (and not VP7 or VP8-in-WebP).
This is equivalent to the current criterion, but allows
the WebP decoder to evolve and to get its own update_thread_context.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
VP8-in-WebP only uses key frame encoding (see [1]), yet this
is currently not enforced. This commit does so in order to
make output reproducible with frame-threading as the VP8 decoder's
update_thread_context is not called at all when using decoding
VP8-in-WebP (as this is unnecessary for key frame-only streams).
[1]: https://developers.google.com/speed/webp/docs/riff_container
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
"When aps_params_type is equal to ALF_APS or SCALING_APS, the value of aps_adaptation_parameter_set_id shall be
in the range of 0 to 7, inclusive.
When aps_params_type is equal to LMCS_APS, the value of aps_adaptation_parameter_set_id shall be in the range of 0
to 3, inclusive."
Fixes: out of array accesses
Fixes: 65932/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_VVC_fuzzer-4563412340244480
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
There are 6 deprecated ISO language codes that are still valid for DVDs.
This patch allows avlanguage to recognize them correctly. The codes are:
(1) "in" - legacy code for Indonesian, mapped to the modern code
(2) "iw" - legacy code for Hebrew, mapped to the modern code
(3) "ji" - legacy code for Yiddish, mapped to the modern code
(4) "jw" - legacy code for Javanese, published and used as a typoed version of "jv"
(5) "mo" - legacy code for Moldavian, mapped to the inclusive code
(6) "sh" - legacy code for Serbo-Croatian, no modern inclusive code so it is left alone
All of this can be verified from several sources including:
https://en.wikipedia.org/wiki/List_of_ISO_639_language_codes
Signed-off-by: Marth64 <marth64@proxyid.net>
Use avio_get_dyn_buf()+ffio_free_dyn_buf() instead of
avio_close_dyn_buf()+av_free(). This saves an allocation
(and memcpy) in case all the data fits in the AVIOContext's
write buffer.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It implements BSD-specific support for very old analog capture cards,
which are highly unlikely to be useful today. After being added in 2005,
there were never any commits to it beyond compilation fixes and generic
maintenance. There have also been zero trac tickets for this device, and
the only related web search result I found concludes that it does not
work.
The code also does some unacceptable things, like messing with signal
handlers and storing its state in global variables.
This commit lets ffplay properly propagate YUV metadata into the filter
graph, avoiding such issues as e.g. accidentally passing YCgCo into a
filter that can't support it. Also fixes an error related to this
missing metadata from buffersrc (since commit 2d555dc82d)
See-Also: https://trac.ffmpeg.org/ticket/10839
Fixes a regression since d9fed9df2a, where the single animated stream would
be exported twice as two independent streams.
Signed-off-by: James Almer <jamrial@gmail.com>
Andreas Rheinhardt
Marth64
Frank Plowman
James Almer
Niklas Haas
Cosmin Stejerean
Leo Izen
Nuo Mi
Anton Khirnov
Marton Balint
Paul B Mahol
Brad Smith
Alessandro Ros
Mark Thompson
Damiano Galassi
Gyan Doshi
王昊然