x264_encoder_encode can return 0 with nnal 0. As a result, encode_nals will
return 0. In this condition, it's better to return 0 immediately to avoid
the following unneeded pict_type and flags setting.
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
Generic retime functionality is replaced by a few lines of code directly in the
muxers which used it, which seems a lot easier to understand and this way the
retiming is not dependant of the input durations.
Also remove retimeinterleave, since it is not used by anything anymore.
Signed-off-by: Marton Balint <cus@passwd.hu>
And rename it to retimeinterleave, use the pcm_rechunk bitstream filter for
rechunking.
By seperating the two functions we hopefully get cleaner code.
Signed-off-by: Marton Balint <cus@passwd.hu>
Previously only 1:1 bitstream filters were supported, the end of the stream was
not signalled to the bitstream filters and time base changes were ignored.
This change also allows muxers to set up bitstream filters regardless of the
autobsf flag during write_header instead of during check_bitstream and those
bitstream filters will always be executed.
Signed-off-by: Marton Balint <cus@passwd.hu>
avformat_alloc_output_context2() already sets the oformat member, so
that there is no reason to overwrite it again with the value it already
has.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
because the offset should use one byte
Reviewed-by: Zhao Jun <barryjzhao@tencent.com>
Reported-by: Zhao Jun <barryjzhao@tencent.com>
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Failures of the allocations that happen under the hood when using dynamic
buffers are usually completely unchecked and the Matroska muxer is no
exception to this.
The API has its part in this, because there is no documented way to
actually check for errors: The return value of both avio_get_dyn_buf()
as well as avio_close_dyn_buf() is only documented as "the length of
the byte buffer", so that using this to return errors would be an API
break.
Therefore this commit uses the only reliable way to check for errors
with avio_get_dyn_buf(): The AVIOContext's error flag. (This is one of
the advantages of avio_get_dyn_buf(): By not destroying the AVIOContext
it is possible to inspect this value.) Checking whether the size or the
pointer vanishes is not enough as it does not check for truncated output
(the dynamic buffer API is int based and so has to truncate the buffer
even when enough memory would be available; it's current actual limit is
even way below INT_MAX).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
If one already has the contents of a master elements in a buffer of
known size, then writing a EBML master element is no different from
writing an EBML binary element. It is overtly complicated to use
start/end_ebml_master() as these functions first write an unkown-length
size field of the appropriate length, then write the buffer's contents,
followed by a seek to the length field to overwrite it with the real
size (obtained via avio_tell() although it was already known in
advance), followed by another seek to the previous position. Just use
put_ebml_binary() instead.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
There is a good upper bound for the maximum length of the Colour master
element; it is therefore unnecessary to use a dynamic buffer for it.
A simple buffer on the stack is enough. This commit implements this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The Matroska muxer updates several header elements when the output is
seekable; if unseekable, the buffer containing the contents of the element
is immediately freed after writing. Before this commit, there were three
places doing exactly the same: Checking whether the output is seekable
and calling the function that writes and frees or the function that
just writes the EBML master. This has been unified; adding SeekHead
entries for these elements has been unified, too.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, SeekEntries were already added before
start_ebml_master_crc32() was even called and before we were actually
sure that we really write the element the SeekHead references: After
all, we might also error out later; and given that the allocations
implicit in dynamic buffers should be checked, end_ebml_master_crc32()
will eventually have to return errors itself, so that it is the right
place to add SeekHead entries.
The earlier behaviour is of course a remnant of the time in which
start_ebml_master_crc32() really did output something, so that the
position before start_ebml_master_crc32() needed to be recorded.
Erroring out later is also not as dangerous as it seems because in
this case no SeekHead will be written (if it happened when writing
the header, the whole muxing process would abort; if it happened
when writing the trailer (when writing chapters not available initially),
writing the trailer would be aborted and no SeekHead containing the
bogus chapter entry would be written).
This commit does not change the way the SeekEntries are added for those
elements that are output preliminarily; this is so because the SeekHead
is written before those elements are finally output and doing it
otherwise would increase the amount of seeks.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The mapping of streams to the various variant streams to be created by
the HLS muxer is roughly as follows: Space and tab separate variant
stream group maps while the entries in each variant stream group map are
separated by ','.
The parsing process of each variant stream group proceeded as follows:
At first the number of occurences of "a:", "v:" and "s:" in each variant
stream group is calculated so that one can can allocate an array of
streams with this number of entries. Then each entry is checked and the
check for stream numbers was deficient: It did check that there is a
number beginning after the ":", but it did not check that the number
extends until the next "," (or until the end).
This means that an invalid variant stream group like v:0_v:1 will not be
rejected; the problem is that the variant stream in this example is
supposed to have two streams associated with it (because it contains two
"v:"), yet only one stream is actually associated with it (because there
is no ',' to start a second stream specifier). This discrepancy led to
segfaults (null pointer dereferencing) in the rest of the code (when the
nonexistent second stream associated to the variant stream was inspected).
Furthermore, this commit also removes an instance of using atoi() whose
behaviour on a range error is undefined.
Fixes ticket #8652.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
fix ticket: 8651
because the init fragment mp4 file name is without base url name,
so just modify it use the full url which splice after init function.
Tested-by: matclayton
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
This patch adds possibility to use 'periodic-rekey' option with
multi-variant streams to hlsenc muxer. All streams variants
use parameters from the same key_info_file.
There are 2 sets of encryption options that kind of overlaps and add
complexity, so I tried to do the thing without changing too much code.
There is a little duplication of the key_file, key_uri, iv_string, etc
in the VariantStream since we copy it from hls to each variant stream,
but generally all the code remains the same to minimise appearing
of unexpected bugs. Refactoring could be done as a separate patch then as needed.
Signed-off-by: Yaroslav Pogrebnyak <yyyaroslav@gmail.com>
segment duration is using vs duration which compute by frame per second,
that can not fix problem of VFR video stream, so compute the duration
when split the segment, set the segment target duration use
current packet pts minus the prev segment end pts..
Reported-by: Zhao Jun <barryjzhao@tencent.com>
Reviewed-by: Zhao Jun <barryjzhao@tencent.com>
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
Fixes: shift exponent 32 is too large for 32-bit type 'int'
Fixes: 21647/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WAVPACK_fuzzer-5686168323883008
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: David Bryant <david@wavpack.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
and make it static again.
These functions have been moved from nutenc to aviobuf and internal.h
in f8280ff4c0 in order to use them in a
forthcoming patch in utils.c. Said patch never happened, so this commit
moves them back and makes them static, effectively reverting said
commit as well as f8280ff4c0 (which added
the ff-prefix to these functions).
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It allows to combine several ffio_free_dyn_buf().
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
NUT uses variable-length integers in order to for length fields.
Therefore the NUT muxer often writes data into a dynamic buffer in order
to get the length of it, then writes the length field using the fewest
amount of bytes needed. To do this, a new dynamic buffer was opened,
used and freed for each element which involves lots of allocations. This
commit changes this: The dynamic buffers are now resetted and reused.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
calculate_checksum in put_packet() is always 1.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
With the description in frame size with refs semantics (SPEC 7.2.5),
it is a requirement of bitstream conformance that for at least one
reference frame has the valid dimensions.
Modify the check to make sure the decoder works well in SINGLE_REFERENCE
mode that not all reference frames have valid dimensions.
Check and error out if invalid reference frame is used in inter_recon.
One of the failure case is a 480x272 inter frame (SINGLE_REFERENCE mode)
with following reference pool:
0. 960x544 LAST valid
1. 1920x1088 GOLDEN invalid, but not used in single reference mode
2. 1920x1088 ALTREF invalid, but not used in single reference mode
3~7 ... Unused
Identical logic in libvpx:
<https://github.com/webmproject/libvpx/blob/master/vp9/decoder/vp9_decodeframe.c#L736>
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
Hard coded parameters for qmin and qmax are currently used to initialize
v4l2_m2m device. This commit uses values from avctx->{qmin,qmax} if they
are set.
Reviewed-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Guo, Yejun
Limin Wang
Marton Balint
Andreas Rheinhardt
Steven Liu
Linjie Fu
rcombs
Yaroslav Pogrebnyak
Lynne
Michael Niedermayer
Zane van Iperen
Mark Reid
James Almer
Andriy Gelman