* Outputs ASS lines with basic coloring and font scaling for each
given region.
* Sets the default style to the resolution of the subtitle plane
(for example, 960x540 / 36pt font for profile A).
* Has options to:
* Disable ruby text (which is coded as regions which have
half-height text in libaribb24).
Enabled by default as without positioning ruby text only
confuses as it is usually coded in the beginning of the decoded
subtitle line.
* Set the working directory, in which libaribb24 will read
configuration as well as into which it may save broadcast extra
symbols as PNG.
Unset by default.
The unconventional library check can be explained by the library's
current master branch being licensed as LGPLv3, but at the time of
writing the latest official release is still licensed under GPLv3.
Thus, one either has to wait for the following release, or enable
GPLv3.
This commit implements a full ATRAC9 decoder, a simple low-delay codec
developed by Sony and used in most PSVita games, some PS3 games and some
PS4 games. Its similar to AAC in that it uses Huffman coded scalefactors
but instead of vector quantization it just Huffman codes the spectral
coefficients (in a way similar to how Opus splits band energy coding
into coarse and fine precision). It opts to write rather large Huffman
codes by packing several small coefficients into one Huffman coded
symbol, though I don't believe this increases efficiency at all.
Band extension implements SBC in a simple way, first it mirrors the
lower spectrum onto the higher frequencies and then it uses one of 5
filters to shape it. Noise substitution is implemented via 2 of them.
Unlike previous ATRAC codecs, there's no QMF, this is a standard MDCT
codec.
Based off of the reverse engineering work of Alex Barney.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
The last workaround is not sufficient to make oss fuzz work with the iterate API
as it did not provide a FFmpeg that external libs can be linked to.
This patch does not fully restore the pre iterate functionality. My attempts to
do this have so far failed.
The problem with this solution is that it renders the fuzzers virtual system
ffmpeg (libs) non functional. Which differs from a real system compared to the
virtual system tested by the fuzzer.
It should theoretically not matter as the system ffmpeg wouldnt be used.
But with more cases being fuzzed we likely will hit a case where a external
lib is involved and it does matter ...
Working around this may be possible with weak symbols but so far my attempts
failed
Alternatively multiple ffmpeg could be built, this becomes messy though
quickly as they need to be all linked together. That is we need a FFmpeg
that has the iterate API modified so it can work with the resources
available to ossfuzz. And at the same time we need a ffmpeg that has
its full functionality for any external libs which use ffmpeg and are
used by ffmpeg.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
A few days ago ossfuzz stoped testing new FFmpeg as it run out of diskspacee
https://oss-fuzz-build-logs.storage.googleapis.com/index.html
An alternative would be to revert the API.
This changes for example
-rwxr-x--- 1 michael michael 144803654 May 14 12:54 tools/target_dec_ac3_fixed_fuzzer*
to
-rwxr-x--- 1 michael michael 30333852 May 14 12:51 tools/target_dec_ac3_fixed_fuzzer*
Which should massively decrease space requirements
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
On modern x86 systems its around 2x faster. For systems without
FPUs it'll be slower, but our policy is to prefer floating point
implementations and to let users decide what's best (or just not
compile them on systems without FPUs).
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Requires AMF headers for at least version 1.4.4.1.
Signed-off-by: Mikhail Mironov <mikhail.mironov@amd.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
There is no longer any need for a list of them at runtime, because
decoders now carry the pointers to their associated hwaccels internally.
The file containing external declarations is now used to make the list
of hwaccels for configure.
Requires AMF headers for at least version 1.4.4.1.
Signed-off-by: Mikhail Mironov <mikhail.mironov@amd.com>
Signed-off-by: Mark Thompson <sw@jkqxz.net>
There is no longer any need for a list of them at runtime, because
decoders now carry the pointers to their associated hwaccels internally.
The file containing external declarations is now used to make the list
of hwaccels for configure.
This was predictably nightmarish, given how ridiculous mpeg4 is.
I had to stare at the cuvid parser output for a long time to work
out what each field was supposed to be, and even then, I still don't
fully understand some of them. Particularly:
vop_coded: If I'm reading the decoder correctly, this flag will always
be 1 as the decoder will not pass the hwaccel any frame
where it is not 1.
divx_flags: There's obviously no documentation on what the possible
flags are. I simply observed that this is '0' for a
normal bitstream and '5' for packed b-frames.
gmc_enabled: I had a number of guesses as to what this mapped to.
I picked the condition I did based on when the cuvid
parser was setting flag.
Also note that as with the vdpau hwaccel, the decoder needs to
consume the entire frame and not the slice.
This is mostly straight-forward. The weird part is that it should
just work for mpeg1, but I see corruption in my test cases, so I'm
going to try and fix that separately.
Some parts of the code are based on a patch by
Timo Rothenpieler <timo@rothenpieler.org>
Merges Libav commit b9129ec466.
Due to the name clash with our cuvid decoder, rename it to nvdec.
This commit also changes the Libav code to dynamic loading of the
cuda/cuvid libraries.
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
This adds hardware decoding for H.264 / HEVC / VP8 / VP9 using the MPP
Rockchip API. It returns frames holding an AVDRMFrameDescriptor struct
in buf[0] that allows drm / dmabuf usage. Tested on RK3288 (TinkerBoard)
and RK3328.
Signed-off-by: Mark Thompson <sw@jkqxz.net>
This patchset enhances Alexis Ballier's original patch and validates
it using Qualcomm's Venus hardware (driver recently landed upstream
[1]).
This has been tested on Qualcomm's DragonBoard 410c and 820c
Configure/make scripts have been validated on Ubuntu 10.04 and
16.04.
Tested decoders:
- h264
- h263
- mpeg4
- vp8
- vp9
- hevc
Tested encoders:
- h264
- h263
- mpeg4
Tested transcoding (concurrent encoding/decoding)
Some of the changes introduced:
- v4l2: code cleanup and abstractions added
- v4l2: follow the new encode/decode api.
- v4l2: fix display size for NV12 output pool.
- v4l2: handle EOS (EPIPE and draining)
- v4l2: vp8 and mpeg4 decoding and encoding.
- v4l2: hevc and vp9 support.
- v4l2: generate EOF on dequeue errors.
- v4l2: h264_mp4toannexb filtering.
- v4l2: fixed make install and fate issues.
- v4l2: codecs enabled/disabled depending on pixfmt defined
- v4l2: pass timebase/framerate to the context
- v4l2: runtime decoder reconfiguration.
- v4l2: add more frame information
- v4l2: free hardware resources on last reference being released
- v4l2: encoding: disable b-frames for upstreaming (patch required)
[1] https://lwn.net/Articles/697956/
System Level view:
v42l_m2m_enc/dec --> v4l2_m2m --> v4l2_context --> v4l2_buffers
Reviewed-by: Jorge Ramirez <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Alexis Ballier <aballier@gentoo.org>
Tested-by: Jorge Ramirez <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: wm4 <nfxjfg@googlemail.com>
Intended for use with hardware frames for which rawvideo is not
sufficient. Requires the trusted packet flag to be set - decoding
fails if not to avoid security issues (the wrapped AVFrame can
contain pointers to arbitrary data).
Jan Ekström
Paul B Mahol
James Almer
Cameron Cawley
hwren
Rostislav Pehlivanov
Michael Niedermayer
Luca Barbato
Aurelien Jacobs
Tomas Härdin
Josh de Kock
Michael Wootton
Mark Thompson
Mikhail Mironov
Philip Langdale
Aman Gupta
Timo Rothenpieler
Anton Khirnov
Clément Bœsch
Lionel CHAZALLON
Jorge Ramirez-Ortiz
Paras Chadha