An AVStream's internal AVCodecContext is pretty much unused for muxing:
The only place where any of its fields are set is
avformat_transfer_internal_stream_timing_info() where its time base is
set based upon the desired output format. The max_b_frames field is
never set at all, so don't read it in mux.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Since 1c0885334d ff_compute_frame_duration
is only called from within utils.c and only for demuxers. So make it
static and remove the code in it that deals with muxers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
AVFormatContext.internal is already allocated by
avformat_alloc_context() on success; and on error,
avformat_alloc_context() cleans up manually without
avformat_free_context().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The WebM DASH Manifest demuxer creates a comma-delimited list of
all the timestamps of index entries. It allocates 20 bytes per
timestamp; yet the largest 64bit numbers have 20 decimal digits
(for int64_t it can be '-'+ 19 digits), so that one needs 21B
per entry because of the comma (resp. the final NUL).
The code uses snprintf, but snprintf returns the strlen of the string
that would have been written had the supplied buffer been big enough.
And if this is 21, then the next entry is written at an offset of 21
from the current position. So if enough such entries exist, the buffer
won't suffice.
This commit fixes this by replacing the allocation of buffer for
the supposedly worst-case with dynamic allocations by using an AVBPrint.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes: signed integer overflow: 9223372034248226491 + 3275247799 cannot be represented in type 'long'
Fixes: clusterfuzz-testcase-minimized-audio_decoder_fuzzer-4538729166077952
Reported-by: Matt Wolenetz <wolenetz@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 1179337772 + 1392508928 cannot be represented in type 'int'
Fixes: 34088/clusterfuzz-testcase-minimized-ffmpeg_dem_AVI_fuzzer-5846945303232512
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Don't allocate the buffer for the title ourselves, leave it to
av_dict_set(). This simplifies freeing.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
A single VorbisComment consists of a length field and a
non-NUL-terminated string of the form "key=value". Up until now,
when parsing such a VorbisComment, zero-terminated duplicates of
key and value would be created. This is wasteful if these duplicates
are freed shortly afterwards, as happens in particular in case of
attached pictures: In this case value is base64 encoded and only
needed to decode the actual data.
Therefore this commit changes this: The buffer is temporarily modified
so that both key and value are zero-terminated. Then the data is used
in-place and restored to its original state afterwards.
This requires that the buffer has at least one byte of padding. All
buffers currently have AV_INPUT_BUFFER_PADDING_SIZE bytes padding,
so this is ok.
Finally, this also fixes weird behaviour from ogm_chapter():
It sometimes freed given to it, leaving the caller with dangling
pointers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This can be achieved by allocating the AVIOContext and
the dynamic buffer's opaque and internal write buffer together.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently AVIOContext's private fields are all over AVIOContext.
This commit moves them into a new structure in avio_internal.h instead.
Said structure contains the public AVIOContext as its first element
in order to avoid having to allocate a separate AVIOContextInternal
which is costly for those use cases where one just wants to access
an already existing buffer via the AVIOContext-API.
For these cases ffio_init_context() can't fail and always returned zero,
which was typically not checked. Therefore it has been made to not
return anything.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is the more natural place for it given that it only deals with I/O;
in fact, the function already has the ffio prefix and its declaration
already is in avio_internal.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Includes basic support for both the ISMV ('dfxp') and MP4 ('stpp')
methods. This initial version also foregoes fragmentation support
in case the built-in sample squashing is to be utilized, as this
eases the initial review.
Additionally, add basic tests for both muxing modes in MP4.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
Up until now, the Matroska muxer did not use the dispositions it is
given as-is; instead it by default overrode the disposition of the first
track of a kind (audio, video, subtitles) if no track of this kind has
the default disposition set. And up until recently, it also enforced
by default that no more than one track of each kind be marked as
default.
The rationale for the former is that there are lots of containers which
lack the concept of default streams, so that it is not uncommon for no
stream to be marked as default at all; the rationale for the latter was
that up until recently, it was dubious whether the Matroska specification
allowed more than one default stream for track type (e.g. mkvmerge
disallowed it). It was this point which led to the implementation of
the above mentioned behaviour inspired by mkvmerge.
Yet the Matroska specifications have changed and now explicitly allow
to set more than one track of each type as default, so that the main
reason of not using the dispositions as-is was rendered moot. Therefore
this commit changes the default to pass the disposition through.
The matroska-mpegts-remux FATE-test has been updated to still use the
old "infer" mode so that it is still covered by FATE; the
matroska-zero-length-block test has also been updated to cover
the infer_no_subs mode. The references for lots of other FATE tests
needed to be updated because of a newly added FlagDefault element with
value zero (whereas a FlagDefault with value 1 needn't be coded at all,
as it coincided with the default value of said element).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The Matroska specifications have evolved and now allow to mark
multiple tracks of the same kind as default (whether this was legal or
not before was dubious; e.g. mkvmerge disallowed it). Yet when the
Matroska muxer is set to infer default dispositions if absent, it also
enforced the now outdated restriction. So update this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The low overhead OBU format provides no means to resync after performing
a byte-based seek; in other words: Byte based seeking is just not
supported.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The av1_merge_frame BSF outputs its cached data when it sees the
beginning of a new frame, i.e. when it sees a temporal delimiter OBU.
Therefore it typically has a temporal delimiter OBU cached after
outputting a packet.
This implies that the OBU demuxer must flush its BSF upon seeking
because otherwise the first frame returned after a seek consists
of an old temporal delimiter OBU only.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It allows demuxers to perform certain tasks after
a successful generic seek.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The MOV muxer can store streamids as track ids but they aren't
visible when probing the result via lavf/dump or ffprobe due to
lack of this flag in the demuxer.
because subtitles streams will be written to webvtt m3u8 list
so the stream index should minus subtitles streams count when subtitle
between audio and video streams.
testcase:
before patch:
ffmpeg -i input -map 0🅰️0 -map 0:s:0 -map 0✌️0 -f hls aaaa.m3u8
will EXC_BAD_ACCESS
after patch:
ffmpeg -i input -map 0🅰️0 -map 0:s:0 -map 0✌️0 -f hls aaaa.m3u8
will ok
Signed-off-by: Steven Liu <liuqi05@kuaishou.com>
"frag_start" is redundant, and every occurance can be replaced with cluster[0].dts - start_dts
The proof of no behaviour changes: (All line number below is based on commit bff7d662d7)
"frag_start" is read at 4 place (with all possible call stacks):
mov_write_packet
...
mov_flush_fragment
mov_write_moof_tag
mov_write_moof_tag_internal
mov_write_traf_tag
mov_write_tfxd_tag (#1)
mov_write_tfdt_tag (#2)
mov_add_tfra_entries (#3)
mov_write_sidx_tags
mov_write_sidx_tag (#4)
mov_write_trailer
mov_auto_flush_fragment
mov_flush_fragment
... (#1#2#3#4)
mov_write_sidx_tags
mov_write_sidx_tag (#4)
shift_data
compute_sidx_size
get_sidx_size
mov_write_sidx_tags
mov_write_sidx_tag (#4)
All read happens in "mov_write_trailer" and "mov_write_moof_tag". So we need to prove no behaviour change in these two
functions.
Condition 1: for every track that have "trk->entry == 0", trk->frag_start == trk->track_duration.
Condition 2: for every track that have "trk->entry > 0", trk->frag_start == trk->cluster[0].dts - trk->start_dts.
Definition 1: "Before flush" means just before the invocation of "mov_flush_fragment", except for the auto-flush case in
"mov_write_single_packet", which means before L5934.
Lemma 1: If Condition 1 & 2 is true before flush, Condition 1 & 2 is still true after "mov_flush_fragment" returns.
Proof:
No update to the tracks that have "trk->entry == 0" before flushing, so we only consider tracks that have "trk->entry > 0":
Case 1: !moov_written and moov will be written in this iteration
trk->entry = 0 L5366
trk->frag_start == trk->cluster[0].dts - trk->start_dts Lemma condition
trk->frag_start += trk->start_dts + trk->track_duration - trk->cluster[0].dts; L5363
So trk->entry == 0 && trk->frag_start == trk->track_duration
Case 2: !moov_written and moov will NOT be written in this iteration
nothing changed
Case 3: moov_written
trk->entry = 0 L5445
trk->frag_start == trk->cluster[0].dts - trk->start_dts Lemma condition
trk->frag_start += trk->start_dts + trk->track_duration - trk->cluster[0].dts; L5444
So trk->entry == 0 && trk->frag_start == trk->track_duration
Note that trk->track_duration may be updated for the tracks that have "trk->entry > 0" (mov_write_moov_tag will
update track_duration of "tmcd" track, but it must have 1 entry). But in all case, trk->frag_start is also updated
to consider the new value.
Lemma 2: If Condition 1 & 2 is true before "ff_mov_write_packet" invocation, Condition 1 & 2 is still true after it returns.
Proof:
Only the track corresponding to the pkt is updated, and no update to relevant variables if trk->entry > 0 before invocation.
So we only need to prove "trk->frag_start == trk->cluster[0].dts - trk->start_dts" after trk->entry increase from 0 to 1.
Case 1: trk->start_dts == AV_NOPTS_VALUE
Case 1.1: trk->frag_discont && use_editlist
trk->cluster[0].dts = pkt->dts at L5741
trk->frag_start = pkt->pts at L5785
trk->start_dts = pkt->dts - pkt->pts at L5786
So trk->frag_start == trk->cluster[0].dts - trk->start_dts
Case 1.2: trk->frag_discont && !use_editlist
trk->cluster[0].dts = pkt->dts at L5741
trk->frag_start = pkt->dts at L5790
trk->start_dts = 0 at L5791
So trk->frag_start == trk->cluster[0].dts - trk->start_dts
Case 1.3: !trk->frag_discont
trk->cluster[0].dts = pkt->dts at L5741
trk->frag_start = 0 init
trk->start_dts = pkt->dts at L5779
So trk->frag_start == trk->cluster[0].dts - trk->start_dts
Case 2: trk->start_dts != AV_NOPTS_VALUE
Case 2.1: trk->frag_discont
trk->cluster[0].dts = pkt->dts at L5741
trk->frag_start = pkt->dts - trk->start_dts at L5763
So trk->frag_start == trk->cluster[0].dts - trk->start_dts
Case 2.2: !trk->frag_discont
trk->cluster[0].dts = trk->start_dts + trk->track_duration at L5749
trk->track_duration == trk->frag_start Lemma condition
So trk->frag_start == trk->cluster[0].dts - trk->start_dts
Lemma 3: Condition 1 & 2 is true in all case before and after "ff_mov_write_packet" invocation, before flush and after
"mov_flush_fragment" returns.
Proof: All updates to relevant variable happen either in "ff_mov_write_packet", or during flush. And Condition 1 & 2
is true initially. So with lemma 1 & 2, we can prove this use induction.
Noticed that all read of "frag_start" only happen in "trk->entry > 0" branch. Now we need to prove Condition 2 is true
before each read.
Because no update to variables relevant to Condition 2 between "before flush" and "mov_write_moof_tag" invocation, we
can conclude Condition 2 is true before every invocation of "mov_write_moof_tag". No behaviour change in
"mov_write_moof_tag" is proved.
In "mov_write_trailer", No update to relevant variables after the last flush and before the invocation of
"mov_write_sidx_tag". So no behaviour change to "mov_write_trailer" is proved.
Q.E.D.
Signed-off-by: Hu Weiwen <sehuww@mail.scut.edu.cn>
Signed-off-by: Martin Storsjö <martin@martin.st>
track->mdat_buf can be not NULL while the track is still empty if the
last packet write failed.
Signed-off-by: Hu Weiwen <sehuww@mail.scut.edu.cn>
Signed-off-by: Martin Storsjö <martin@martin.st>
In 1c42fd9323 the ipcm identifier was
added in order to demux additional raw audio from Sony MP4 files.
Unfortunately, it was not noticed that this same list is utilized
for muxing as well, thus causing ipcm to get preferred compared
to the identifier officially specified in QTFF documentation.
This fixes the order of preference for 24bit PCM, where ipcm is
still allowed, but in24 is the first match - thus being preferred.
Fixes fate-acodec-pcm-s24be.
Partition struct may be reallocated, so let's store the score directly in order
to avoid use-after-free.
Also mxf->current_partition might be null when reading some local tags.
Signed-off-by: Marton Balint <cus@passwd.hu>
If autoflushing on a new packet (e.g. due to the frag_every_frame
flag being set), there's no samples to be written in the new fragment,
so we can't overwrite the track duration in order to make it line
up with the next packet to be written.
Signed-off-by: Martin Storsjö <martin@martin.st>
Andreas Rheinhardt
Michael Niedermayer
Jan Ekström
Gyan Doshi
Nicolas George
Steven Liu
Hu Weiwen
Jan Ekström
Stephen Hutchinson
Marton Balint
Michael Witten
Martin Storsjö
Gregory Montoir
Soft Works