This allows more efficient access to the array as the level and flags
are contiguous. Around 4% faster coefficient decoding.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This makes the h.264 decoder threadsafe to initialize.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Work on the AVFrame references directly.
Instead of setting up a flipped/swapped "view" on the pictures,
flip/swap them when returning decoded frames to the API user.
Rather than copying data buffers around, allocate a proper frame, and
use the standard AVFrame functions. This effectively makes the decoder
capable of direct rendering.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
This avoid going through constants.c while still sharing them
with proresdsp.asm
Reviewed-by: "Ronald S. Bultje" <rsbultje@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch fixes build of AAC encoder optimized for mips that was broken due
to some changes in generic code that were not propagated to the optimized code.
Also, some functions in the optimized code are basically duplicate of functions
from generic code. Since they do not bring enough improvement to the optimized
code to justify their existence, they are removed (which improves
maintainability of the optimized code).
Optimizations disabled in 97437bd are enabled again.
Signed-off-by: Nedeljko Babic <nedeljko.babic@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
These aren't quite as helpful as the ones in 8bpp, since over there,
we can use pmulhrsw, but here the coefficients have too many bits to
be able to take advantage of pmulhrsw. However, we can still skip
cols for which all coefs are 0, and instead just zero the input data
for the row itx. This helps a few % on overall decoding speed.
The trouble with this function is that intermediates overflow 31+sign
bits, so I've added some helpers (that will also be used in 10/12bpp
8x8, 16x16 and 32x32) to make that easier, basically emulating a half-
assed pmaddqd using 2xpmaddwd. It's currently sse2-only, if anyone sees
potential in adding ssse3, I'd love to hear it.
On 12 frames of a 444p 12 bits DNxHR sequence, _put function:
C: 78902 decicycles in idct, 262071 runs, 73 skips
avx: 32478 decicycles in idct, 262045 runs, 99 skips
Difference between the 2:
stddev: 0.39 PSNR:104.47 MAXDIFF: 2
This is unavoidable and due to the scale factors used in the x86
version, which cannot match the C ones.
In addition, the trick of adding an initial bias to the input of a
pass can overflow, as the input coefficients are already 15bits,
which is the maximum this function can handle.
Overall, however, the omse on 12 bits samples goes from 0.16916 to
0.16883. Reducing rowshift by 1 improves to 0.0908, but causes
overflows.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Modeled from the prores version. Clips to [0;1023] and is bitexact.
Bitexactness requires to add offsets in different places compared to
prores or C, and makes the function approximately 2% slower.
For 16 frames of a DNxHD 4:2:2 10bits test sequence:
C: 60861 decicycles in idct, 1048205 runs, 371 skips
sse2: 27567 decicycles in idct, 1048216 runs, 360 skips
avx: 26272 decicycles in idct, 1048171 runs, 405 skips
The add version is not implemented, so the corresponding dsp
function is set to NULL to make it clear in a code executing it.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
When the input of a pass has 15 or 16 bits of precision (in particular
the column pass), the addition of a bias to W4 may lead to overflows
in the input to pmaddwd.
This requires postponing the adding of the bias to after the first
butterfly. To do so, the fact that m15, unused although zeroed, is
exploited. In case the pass is safe, an address can be directly used,
and the number of xmm regs can be decreased. Otherwise, the 32bits bias
is loaded into it.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
omse goes from 0.03060703 (which fails for dct-test) to 0.01663750.
This also actually improve the error of decoding the sample generated
by fate-vsynth3-dnxhd1080i-10bit using simple_idct10 to FAANI, which
goes (when resampled to yuv422p) from:
stddev: 0.06 PSNR: 72.28 MAXDIFF: 1
to identical.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This should be reused for a generic simple_idct10 function.
Requires a bit of trickery to declare common constants in C.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Bare ampersand characters are still accepted, even though out-of-spec.
Also fixes adjacent tags not being parsed.
Fixes trac #4915
Signed-off-by: Ricardo Constantino <wiiaboo@gmail.com>
This commit adds the ability for a profile to set the default
options, as well as for the user to override such options
by simply stating them in the command line while still keeping
the same profile, as long as those options are still permitted by
the profile.
Example: setting the profile to aac_low (the default) will turn
PNS and IS on. They can be disabled by -aac_pns 0 and -aac_is 0,
respectively. Turning on -aac_pred 1 will cause the profile to be
elevated to aac_main, as long as no options forbidding aac_main
have been entered (like AAC-LTP, which will be pushed soon).
A useful feature is that by setting the profile to mpeg2_aac_low,
all MPEG4 features will be disabled and if the user tries to enable
them then the program will exit with an error. This profile is
signalled with the same bitstream as aac_low (MPEG4) but some devices
and decoders will fail if any MPEG4 features have been enabled.
This commit implements support for 7.1 channel audio. There's no
more predefined bitstream channel mappings so going beyond 8 channels
(and 7 channels exactly) will require programmable channel elements,
which is already underway.
The bulk of calls to quantize_band_cost are replaced
by a call to a version that memoizes, greatly improving
performance, since during coefficient search there is
a great deal of repeat work.
Memoization cannot always be applied, so do this in a
different function, and leave the original as-is.
Intermediate results can indeed violate SF delta. Instead of asserting
there, just make the code safe, and assert on the final result.
Also re-clamp SFs more often in short windows (which tend to violate
the restriction when encoding the switch from one window to the other)
It was merged with the iff_ilbm decoder in commit
929a24efff.
Define AV_CODEC_ID_IFF_BYTERUN1 as AV_CODEC_ID_IFF_ILBM for API
compatibility.
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Hendrik Leppkes
Ronald S. Bultje
Christophe Gisquet
Derek Buitenhuis
Luca Barbato
wm4
Vittorio Giovara
James Almer
Nedeljko Babic
Michael Niedermayer
Rostislav Pehlivanov
Ricardo Constantino
Claudio Freire
Andreas Cadhalpun