It is entirely unnecessary to use it given that all decoders
here share the same set of supported pixel formats. So just
hardcode this list.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
AVCodec.pix_fmts is only intended for encoders (decoders use
the get_format callback to let the user choose a pix fmt).
So remove them for the decoders for which this is possible
without further complications; keep them for now in the codecs
that actually use them (by passing avctx->codec->pix_fmts to
ff_get_formatt()).
Also notice that some of these lists were wrong; e.g.
317b7b06fd added support for YUV444P16
for cuviddec, but forgot to add it to pix_fmts.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This bug causes the DXT5 decoder to produce incorrect block texture data.
After the fix, textures are visually correct and match data decoded by
Resolume Alley (extracted with Nvida Nsight for comparison). Current FATE DXT5
samples did not cover this case.
Signed-off-by: Connor Worley <connorbworley@gmail.com>
DXV files seem to misnomer DXT5 and really encode DXT4 with
premultiplied alpha. At least, this is what Resolume alley does.
To check, encode some input with alpha as "Normal Quality, With Alpha"
in Alley, then decode the output with this change -- results are true
to the original input compared to git-master.
Signed-off-by: Connor Worley <connorbworley@gmail.com>
The runtime doesn't set the frame type to MFX_FRAMETYPE_IDR on the
returned mfx bitstream for a keyframe, it set the frame type to
MFX_FRAMETYPE_I only. This patch added workaround for VP9 keyframe to
make the coded stream seekable.
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
The VC1_D2010 profile, also known as VC1_VLD2010, has the same functionality
and specification as the VC1_D profile. Support for this profile serves only
as a positive indication that the accelerator has been designed with awareness
of the modifications specified in the August 2010 version of this specification.
Hardware accelerator drivers that expose support for this profile must not
also expose the previously specified VC1_D GUID, unless the accelerator works
properly with existing software decoders that use VC1_D and that do not incorporate
the corrections added to the August 2010 version of this specification.
As a result, we could give VC1_VLD2010 a higher priority and initialize
it first.
Signed-off-by: Aleksoid <Aleksoid1978@mail.ru>
Signed-off-by: Tong Wu <tong1.wu@intel.com>
Ensure all hwaccels that allocate a buffer use NVDECContext->bitstream_internal
instead. Otherwise, if FFHWAccel->end_frame() isn't called before
FFHWAccel->uninit(), an attempt to free a stale pointer to memory not owned by
the hwaccel could take place.
Reviewed-by: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: James Almer <jamrial@gmail.com>
This can be achieved by using AV_OPT_TYPE_FLAGS instead of
AV_OPT_TYPE_STRING. It also avoids strcmp() when accessing
the option.
Reviewed-by: Stefano Sabatini <stefasab@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It uses the int64_t instead of the double member.
(This code can currently not be reached: av_opt_get() calls
av_opt_find2() with NULL as unit in which case AV_OPT_TYPE_CONST
options are never returned, leading av_opt_get() to always
return AVERROR_OPTION_NOT_FOUND when searching for AV_OPT_TYPE_CONST*.
For the same reason the code read_number() will never be called
from get_number() when searching for an option of type
AV_OPT_TYPE_CONST. The other callers of read_number() also only
call it with types other than AV_OPT_TYPE_CONST.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
We don't need to include fifo.h, because we don't need AVFifo
as a complete type. Also add the other used headers directly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Besides being extremly simple this also avoids including
ff_ccfifo_ccdetected() unnecessarily (it is only used by decklink).
This is possible because this is not avpriv, but duplicated into
lavd if necessary.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The muxer's AVCodecContext is currently used for exactly one thing:
To store a time base in it that has been derived via heuristics
in avformat_transfer_internal_stream_timing_info(); said time base
can then be read back via av_stream_get_codec_timebase().
But one does not need a whole AVCodecContext for that, a simple
AVRational is enough.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For muxers, the internal AVCodecContext is basically unused
except in avformat_transfer_internal_stream_timing_info()
(which sets time_base and ticks_per_frame) and
av_stream_get_codec_timebase() (a getter for time_base).
This makes ticks_per_frame write-only, so don't set it.
Also remove an always-false check for the AVCodecContext's
codec_tag.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
info level will be too noisy if several instances of the decoder are fired
at the same time, as will be the case with tiled AVIF.
Signed-off-by: James Almer <jamrial@gmail.com>
info level will be too noisy if several instances of the decoder are fired
at the same time, as will be the case with tiled AVIF.
Signed-off-by: James Almer <jamrial@gmail.com>
If the number of CTUs reduces between one picture and the next, the
slice_idx table is reduced in size in the frame_context_for_each_tl call
on vvcdec.c:321. When initialising the slice_idx table on vvcdec.c:325,
the old code uses fc->tab.sz.ctu_count when calculating the table size.
fc->tab.sz.ctu_count holds the old ctu count at this point however, not
being updated to hold the new ctu count until vvcdec.c:342. This causes
an out-of-bounds write.
Patch fixes the problem by using pps->ctb_count, which was just used
when allocating the table, in place of fc->tab.sz.ctu_count when
initialising the table.
Signed-off-by: Frank Plowman <post@frankplowman.com>
Instead of overriding the frame properties in fill_picture(), advertise
the supported YUV colorspace and range at format negotiation time. (The
correct metadata will now be set automatically by ff_get_video_buffer)
This makes all ff_draw_* based filters aware of YUV colorspaces and
ranges. Needed for YUVJ removal. Also fixes a bug where e.g. vf_pad
would generate a limited range background even after conversion to
full-scale grayscale.
The FATE changes were a consequence of the aforementioned bugfix - the
gray scale files are output as full range (due to conversion by
libswscale, which hard-codes gray = full), and appropriately tagged as
such, but before this change the padded version incorrectly used
a limited range (16) black background for these formats.
libjxl doesn't support negative strides, but JPEG XL has an orientation
flag inside the codestream. We can use this to work around the library
limitation, by taking the absolute value of the negative row stride,
sending the image up-side-down, and telling the library that the image
has a vertical-flip orientation.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Once it became fully non-transparent and service of shady practices
behind closed doors, I can not be here any more.
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Currently, when writing PCMA or PCMU tracks with FLV or RTMP, the
stereo flag and sample rate flag inside RTMP audio messages are
overridden, making impossible to distinguish between mono and stereo
tracks. This patch fixes the issue by restoring the same flag mechanism
of all other codecs, that takes into consideration the right channel
count and sample rate.
Signed-off-by: Alessandro Ros <aler9.dev@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Distinguish between a decoder being entirely missing and a decoder which
requires features which are not present in the incomplete implementation
in libavcodec and therefore can't be used.
Yadif filter assumed that the output timebase is always half of the input
timebase. This is not true if halving the input time base is not representable
as an AVRational causing the output timestamps to be invalidly scaled in such a
case.
So let's use av_reduce instead of av_mul_q when calculating the output time
base and if the conversion is inexact then let's fall back to the original
timebase which probably makes more parctical sense than using x/INT_MAX.
Fixes invalidly scaled pts_time values in this command line:
ffmpeg -f lavfi -i testsrc -vf settb=tb=1/2000000000,yadif,showinfo -f null none
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes parsing small timebases from expressions (where the expression API
converts the result to double), like in this command line:
ffprobe -f lavfi -i testsrc=d=1,settb=1/2000000000 -show_streams -show_entries stream=time_base
Before the patch timebase was parsed as 1/1999999999.
Signed-off-by: Marton Balint <cus@passwd.hu>
Andreas Rheinhardt
Connor Worley
Haihao Xiang
Tong Wu
Aleksoid
Wu Jianhua
James Almer
Lynne
Marth64
Frank Plowman
Niklas Haas
Cosmin Stejerean
Leo Izen
Nuo Mi
Anton Khirnov
Marton Balint
Paul B Mahol
Brad Smith
Alessandro Ros
Mark Thompson
Damiano Galassi