Besides being nicer code this also has the advantage of not making
assumptions about the internal implementation: While it is documented
that the AVFilter.inputs and AVFilter.outputs arrays are terminated
by a zeroed sentinel, one is not allowed to infer that one can just
check avfilter_pad_get_name(padarray, i) to see whether one has reached
the sentinel:
It could be that the pointer to the string is contained
in a different structure than AVFilterPad that needs to be accessed
first: return pad->struct->string.
It could be that for small strings an internal buffer in
AVFilterPad is used (to avoid a relocation) whereas for longer strings
an external string is used; this is useful to avoid relocations:
return pad->string_ptr ? pad->string_ptr : pad->interal_string
Or it could be that the name has a default value:
return pad->name ? pad->name : "default"
(This actually made sense for us because the name of most of our
AVFilterPads is just "default"; doing so would save lots of relocations.)
The only thing one is allowed to infer from the existence of the
sentinel is that one is allowed to use avfilter_pad_count() to get
the number of pads. Therefore it is used.
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently user may use '-init_hw_device type=name' to initialize a hw
device, however the key parameter is ignored when use '-init_hw_device
type=name,key=value'. After applying this patch, user may set key
parameter if needed.
Reviewed-by: Soft Works <softworkz@hotmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
This allows user set hw_device_ctx instead of hw_frames_ctx for QSV
decoders, hence we may remove the ad-hoc libmfx setup code from FFmpeg.
"-hwaccel_output_format format" is applied to QSV decoders after
removing the ad-hoc libmfx code. In order to keep compatibility with old
commandlines, the default format is set to AV_PIX_FMT_QSV, but this
behavior will be removed in the future. Please set "-hwaccel_output_format qsv"
explicitly if AV_PIX_FMT_QSV is expected.
The normal device stuff works for QSV decoders now, user may use
"-init_hw_device args" to initialise device and "-hwaccel_device
devicename" to select a device for QSV decoders.
"-qsv_device device" which was added for workarounding device selection
in the ad-hoc libmfx code still works
For example:
$> ffmpeg -init_hw_device qsv=qsv:hw_any,child_device=/dev/dri/card0
-hwaccel qsv -c:v h264_qsv -i input.h264 -f null -
/dev/dri/renderD128 is actually open for h264_qsv decoder in the above
command without this patch. After applying this patch, /dev/dri/card0
is used.
$> ffmpeg -init_hw_device vaapi=va:/dev/dri/card0 -init_hw_device
qsv=hw@va -hwaccel_device hw -hwaccel qsv -c:v h264_qsv -i input.h264
-f null -
device hw of type qsv is not usable in the above command without this
patch. After applying this patch, this command works as expected.
Reviewed-by: Soft Works <softworkz@hotmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
677a030b26 introduced more printable
side data types in ffprobe, however the Audio Service Type side data
'type' field that was introduced aliases an existing field of the same
name within the side data array, which can lead to JSON output like:
"side_data_list": [
{
"side_data_type": "Audio Service Type",
"type": 0
},
{
"side_data_type": "Stereo 3D",
"type": "side by side",
"inverted": 1
}
]
This, while technically valid JSON, is considered bad practice, since it
forces all downstream users to manually parse it and check all types;
it makes simple deserialization impossible. Worse, in som loosely
type languages, it can lead to silent bugs if exising code assumed
it was a different type.
As such, rename this second "type" field to "service_type".
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
11d3b03fcb added consideration of default stream disposition for audio
and video when choosing the 'best' stream among all the inputs. This can
lead to video streams with lower resolution or audio streams with fewer
channels being selected.
Stream disposition, however, only sets a priority for a stream
among all other streams in the *same input*. It cannot set a priority
for a stream across all inputs.
This patch sets a middle-way and selects the best stream from each file
with default disposition considered. Then it discards disposition weight
and selects best stream as per the original criteria of highest
resolution for video and most channels for audio.
Having the override before autodetection meant that the overridden
value got overwritten by the autodetected result each time,
effectively disabling the ability to utilize the `-top` option
for override purposes.
Somehow I missed this in fbb44bc51a ,
even though the lines were within the context. Probably the code
originally being after this logic had something to do with it,
but previously it only touched the avformat context's codecpar,
which did not affect the encoder codec context whatsoever.
Fixes#9320Fixes#9339
Read rate enforcement delayed till first decoded frame is obtained, to
speed up init of output streams.
Thanks to Linjie Fu <linjie.justin.fu@gmail.com> for the initial patch.
if input start time is not 0 -t is inaccurate doing stream copy,
will record extra duration according to input start time.
it should base on following cases:
input video start time from 60s, duration is 300s,
1. stream copy:
ffmpeg -ss 40 -t 60 -i in.mp4 -c copy -y out.mp4
open_input_file() will seek to 100 and set ts_offset to -100,
process_input() will offset pkt->pts with ts_offset to make it 0,
so when do_streamcopy() with -t, exits when ist->pts >= recording_time.
2. stream copy with -copyts:
ffmpeg -ss 40 -t 60 -copyts -i in.mp4 -c copy -y out.mp4
open_input_file() will seek to 100 and set ts_offset to 0,
process_input() will keep raw pkt->pts as ts_offset is 0,
so when do_streamcopy() with -t, exits when
ist->pts >= (recording_time+f->start_time+f->ctx->start_time).
3. stream copy with -copyts -start_at_zero:
ffmpeg -ss 40 -t 60 -copyts -start_at_zero -i in.mp4 -c copy -y out.mp4
open_input_file() will seek to 120 and set ts_offset to -60 as start_to_zero option,
process_input() will offset pkt->pts with input file start time,
so when do_streamcopy() with -t, exits when ist->pts >= (recording_time+f->start_time).
0 60 40 60 360
|_______|_____|_______|_______________________|
start -ss -t
This fixes ticket #9141.
Signed-off-by: Shiwang.Xie <shiwang.xie666@outlook.com>
xmllint (silently) replaces the ' with " when fixing and validating the output
of ffprobe in fate-ffprobe_xsd.
Reviewed-by: Tobias Rapp <t.rapp@noa-archive.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Besides being unnecessary it is also safer: If the error for an
unrecognized option were triggered (which seems to be impossible right
now), it might be that the stream whose codecpar is accessed is NULL.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Otherwise the rate emulation logic in `transcode_step` never gets
hit, and the unavailability flag never gets reset, leading to an
eternal loop with some rate emulation use cases.
This change was missed during the rework of ffmpeg.c, in which
encoder initialization was moved further down the time line in
commit 67be1ce0c6 . Previously,
as the encoder initialization had happened earlier, this state was
not possible (flow getting as far as hitting the rate emulation logic,
yet not having the encoder initialized yet).
Fixes#9160
Use AVSTREAM_EVENT_FLAG_NEW_PACKETS instead, which should provide the
same information in this case.
Finishes removing all uses of this field as started by 87f0c8280c.
Signed-off-by: James Almer <jamrial@gmail.com>
This also allows to exclusively use pointers to const AVCodec in
fftools/ffmpeg_opt.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Deprecated in c29038f304.
The resample filter based upon this library has been removed as well.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The "packets_and_frames" element has been added to ffprobe.xsd in
0c9f0da0f7 but apparently removing the
check in ffprobe.c has been forgotten.
Signed-off-by: Tobias Rapp <t.rapp@noa-archive.com>
The MJPEG encoder supports some pixel format/color range combinations
only when strictness is set to unofficial or less. Before commit
059fc2d9da said encoder's pix_fmts array
only included the pixel formats supported with default strictness.
When strictness was <= unofficial, fftools/ffmpeg_filter.c used
an extended list of pixel formats instead of the encoder's including
the pixel formats only supported when strictness <= unofficial.
Said commit turned the logic around: The encoder's pix_fmts array now
included all pixel formats and fftools/ffmpeg_filter.c instead used
a small list of all pixel formats supported when strictness is >
unofficial and the encoder's pixel formats instead. In particular,
the codec's pix_fmt is not used when strictness is normal.
This works for the mjpeg encoder; yet it did not work for other
(hardware-based) mjpeg encoders, because the check for whether one is
using the MJPEG encoder is wrong: It just checks the codec id.
So if one used strict unofficial with a hardware-accelerated MJPEG
encoder before commit 059fc2d9da, the unofficial (non-hardware)
pixel formats of the MJPEG encoder would be used; since said commit
the codec's pixel formats are overridden at ordinary strictness
by the ordinary MJPEG pixel formats. This leads to format conversion
errors lateron which were reported in #9186.
The solution to this is to check AVCodec.name instead of its id.
Fixes ticket #9186.
Tested-by: Eoff, Ullysses A <ullysses.a.eoff@intel.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Andreas Rheinhardt
Haihao Xiang
James Almer
Derek Buitenhuis
Linjie Fu
Gyan Doshi
Jan Ekström
Thilo Borgmann
Shiwang.Xie
Keyun Tong
zhilizhao
Valerii Zapodovnikov
Anton Khirnov
Andreas Rheinhardt
Tobias Rapp