Thanks to Mathieu Malaterre <malat@debian.org> for reporting the
Que/Queue typo. (https://bugs.debian.org/839542)
Reviewed-by: Lou Logan <lou@lrcd.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Decoders have previously not used AVFrame.pts, and with the upcoming
deprecation of pkt_pts (in favor of pts), this would lead to an errorneous
interpration of timestamps.
This is a bit messy, mainly due to timestamp handling.
decode_video() relied on the fact that it could set dts on a flush/drain
packet. This is not possible with the old API, and won't be. (I think
doing this was very questionable with the old API. Flush packets should
not contain any information; they just cause a FIFO to be emptied.) This
is replaced with checking the best_effort_timestamp for AV_NOPTS_VALUE,
and using the suggested DTS in the drain case.
The modified tests (fate-cavs and others) still fails due to dropping
the last frame. This happens because the timestamp of the last frame
goes backwards (ffprobe -show_frames shows the same thing). I suspect
that this "worked" due to the best effort timestamp logic picking the
DTS over the decreasing PTS. Since this logic is in libavcodec (where
it probably shouldn't be), this can't be easily fixed. The timestamps
of the cavs samples are weird anyway, so I chose not to fix it.
Another strange thing is the timestamp handling in the video path of
process_input_packet (after the decode_video() call). It looks like
the code to increase next_dts and next_pts should be run every time
a frame is decoded - but it's needed even if output is skipped.
With the new decode API, doing this in ffmpeg.c is impractical. There
was resistance against removing the warning, so put it into libavcodec.
Not bothering with reducing the warning to verbose log level for
subsequent wanrings. The warning should be rare, and only happen when
developing new codecs for the old API.
Includes a change suggested by Michael Niedermayer.
This commit is based on commit 35c8580 from Anton Khirnov <anton@khirnov.net>
which was skipped in b8945c4.
The avcodec_copy_context() call in the encode path is left in place for now
as AVStream.codec is apparently still required even after porting ffmpeg to
the new bsf API.
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
This commit is initially largely based on commit 4426540 from Anton
Khirnov <anton@khirnov.net> and two following fixes (80fb19b and
fe7b21c) which were previously skipped respectively in 98e3153, c9ee36e,
and 7fe7cdc.
mpeg4-bsf-unpack-bframes FATE reference is updated because the bsf
filter now actually fixes the extradata (mpeg4_unpack_bframes_init()
changing one byte is now honored on the output extradata).
The FATE references for remove_extra change because the packet flags
were wrong and the keyframes weren't marked, causing the bsf relying on
these proprieties to not actually work as intended.
The following was fixed by James Almer:
The filter option arguments are now also parsed correctly.
A hack to propagate extradata changed by bitstream filters after the
first av_bsf_receive_packet() call is added to maintain the current
behavior. This was previously done by av_bitstream_filter_filter() and
is needed for the aac_adtstoasc bsf.
The exit_on_error was not being checked anymore, and led to an exit
error in the last frame of h264_mp4toannexb test. Restoring this
behaviour prevents erroring out. The test is still changed as a result
due to the badly filtered frame now not being written after the failure.
Signed-off-by: Clément Bœsch <u@pkh.me>
Signed-off-by: James Almer <jamrial@gmail.com>
This commit is largely based on commit 15e84ed3 from Anton Khirnov
<anton@khirnov.net> which was previously skipped in bbf5ef9d.
There are still a bunch of things raising codecpar related warnings that
need fixing, such as:
- the use of codec->debug in the interactive debug mode
- read_ffserver_streams(): it's probably broken now but there is no test
- lowres stuff
- codec copy apparently required by bitstream filters
The matroska references are updated because they now properly forward
the field_order (previously unknown, now progressive).
Thanks to James Almer for fixing a bunch of FATE issues in this commit.
Signed-off-by: Clément Bœsch <clement@stupeflix.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Avoids unexpected occurance and dependency on NaN behavior and divisions by 0
Testcase: fate-lavf-fate-avi_cram
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
I have no idea why the first hunk uses ost->enc_ctx, because as far as
I understand, that is never used in case of -c:v copy, but this code
block is only entered if encoding_needed=0, which means stream_copy=1.
My point being: review from someone that knows this really well would
be appreciated.
Codec options of streams detected during avformat_find_stream_info are not set
therefore without this patch we initialize the encoders with decoder info
based on decoders without options.
This cause problems for probed DVB teletext streams where
avctx->subtitle_header depend on the txt_format setting.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Marton Balint <cus@passwd.hu>
In the spirit of commit a956840cbc. Simple method to reproduce:
pass -vstats_file /dev/full to ffmpeg.
All raw fclose usages in ffmpeg.c taken care of here.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
avio_closep is not guaranteed to succeed, and its return value can
contain information regarding failure of preceding writes and silent
loss of data (man 2 close, man fclose). Users should know when the
progress was not successfully logged, and so a diagnostic is printed
here.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Ganesh Ajjanagadde <gajjanagadde@gmail.com>
This adds a computation of the progress speed versus realtime ("Nx")
to the status line and to the report log. It uses the progress time
as already calculated for total output time as a base.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
-hex and -dump command line options do nothing unless -loglevel debug is set.
-dump by itself is useful for monitoring live streams (to get the current PTS for example) however when it is used with -loglevel debug for an RTMP stream, librtmp also dumps the packet data which makes the output too noisy.
do_pkt_dump is only set in check_keyboard_interaction or by the -dump command line option so this change should have no effect on any other parts of the code..
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Using -ss as an input option shifts timestamps down by the seek, so it
doesn't have to be added to the recording time when checking whether to
stop.
Fixes#977
Signed-off-by: Simon Thelen <ffmpeg-dev@c-14.de>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Small refactor of fps code for improved readability. In particular
the "cor" variable was unnecessary and misleading because it would
always be set to -delta0.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
I didnt find any case that triggers this but if it gets triggered it needs to be
investigated
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Andreas Cadhalpun
Clément Bœsch
Michael Niedermayer
James Zern
Hendrik Leppkes
Rodger Combs
wm4
Anton Khirnov
James Almer
Clément Bœsch
Jon Toohill
Marton Balint
Carl Eugen Hoyos
Mark Reid
Timo Rothenpieler
Ronald S. Bultje
Stefano Sabatini
Ganesh Ajjanagadde
Moritz Barsnick
Tom Marecek
Simon Thelen
Maksym Veremeyenko
Bryan Huh