FFmpeg

Commit Graph

Author	SHA1	Message	Date
Christophe Gisquet	25d3013e36	fate: add DNxHD/HR tests Currently only 2 profiles are evaluated because they are the only 2 with distributed test sequences. - CID 1260: YUV 4:2:2 10 bits with block-adaptive interlace coding, from ticket 4876; - CID 1270: YUV 4:4:4 10 bits (HR), 1920x839, from ticket 4581. They were generated from the ticket sequences by running the following kind of command-line; ffmpeg -i $INPUT -an -sn -vcodec copy -vframes 1 -y $OUTPUT.mov Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>	9 years ago
Michael Niedermayer	ed18c49f5f	fate: Add basic license header check Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>	9 years ago
Andreas Cadhalpun	c64060d56a	fate: add -fflags +bitexact to the relevant targets This fixes fate with FF_API_LAVF_BITEXACT disabled. Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com> Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>	9 years ago
Janne Grunau	c9f8cfb6d9	fate: add checkasm target	9 years ago
Henrik Gramner	8bc67ec2c0	Checkasm: assembly testing and benchmarking tool It provides the following features: * verify correctness by comparing output to the C version. * detect failure to save and restore clobbered callee-saved registers. * detect 32-bit parameters being used as if they were 64-bit in x86-64 (the upper halves are not guaranteed to be zero - but in practice they very often are, which makes those bugs hard to spot otherwise). * easy benchmarking. Compile by running 'make checkasm'. Execute by running 'tests/checkasm/checkasm'. Optional arguments are '--bench' to run benchmarks for all functions, '--bench=<pattern>' to run benchmarks for all functions that starts with <pattern>, and '<integer>' to seed the PRNG for reproducible results. Contains unit tests for most h264pred functions to get started, more tests can be added afterwards using those as a reference. Loosely based on code from x264. Currently only supports x86 and x86-64, but additional architectures shouldn't be too much of an obstacle to add. Note that functions with floating point parameters or floating point return values are not supported. Some compiler-specific features or preprocessor hacks would likely be required to add support for that. Signed-off-by: Janne Grunau <janne-libav@jannau.net>	9 years ago
George Boyle	c78b82f4da	tests/Makefile: Fix missing trailing slash for API tests dir target Signed-off-by: Michael Niedermayer <michaelni@gmx.at>	10 years ago
George Boyle	7728d231a6	fate/api-tests: Move api-flac-test to API tests directory. Signed-off-by: Michael Niedermayer <michaelni@gmx.at>	10 years ago
George Boyle	3f18cb97e5	fate/api-tests: Add directory and Makefile for API tests The intention of this change is to allow separation of API tests from the existing tests, and also to have a place for the API test source/executable files so they're not mixed in with the actual library code. Signed-off-by: Michael Niedermayer <michaelni@gmx.at>	10 years ago
wm4	8297d87eec	fate: add mp3 gapless test Signed-off-by: Michael Niedermayer <michaelni@gmx.at>	10 years ago
Anton Khirnov	96a06dbaf2	FATE: add support for testing hwaccels	10 years ago
Mark Reid	a181169868	tests/fate: added mxf tests for essencegroups and missing index Signed-off-by: Michael Niedermayer <michaelni@gmx.at>	10 years ago
Carl Eugen Hoyos	af39b8fec4	Fix creation of ffprobe-test.nut on remote targets. This is not sufficient to run "make fate-ffprobe" on a remote system: The ffprobe output contains the relative path to the testfile, it is necessary to run the test from the build directory. One solution is to use a script like the following as --target-exec: ssh target "cd /remote/build/directory; $(printf "%q " "$@")"	10 years ago
Michael Niedermayer	42801505cd	tests: Add vsynth2 which uses the new reference.pnm The file is already present in git and by using it we can perform more tests without the need of fate samples Signed-off-by: Michael Niedermayer <michaelni@gmx.at>	10 years ago
Michael Niedermayer	ed49b142bb	tests: Rename vsynth2 to vsynth_lena This avoids confusion with a growing number of vsynth tests Signed-off-by: Michael Niedermayer <michaelni@gmx.at>	10 years ago
Reinhard Tartler	8895bf7b78	Replace lena.pnm The new reference.pnm is a freely licensed replacement. The photo has been taken by Reinhard Tartler on August 28 2014, and is licensed under the expat license as stated at http://www.jclark.com/xml/copying.txt	10 years ago
Carl Eugen Hoyos	cde0ad5ea7	tests/Makefile: Fix path for creation of ffprobe-test.nut.	10 years ago
Carl Eugen Hoyos	685f7227dc	tests/Makefile: New try to fix fate-ffprobe with --target-path.	10 years ago
Janne Grunau	f29c226af0	fate: add mpeg4 tests for frame size changes	10 years ago
Carl Eugen Hoyos	1d4480d376	tests/Makefile: Fix fate-ffprobe with --target-path Signed-off-by: Michael Niedermayer <michaelni@gmx.at>	10 years ago
Andreas Cadhalpun	c4abee734d	Remove non-free tests/lena.pnm and adapt FATE tests to depend on lena.pnm in the SAMPLES directory Signed-off-by: Michael Niedermayer <michaelni@gmx.at>	10 years ago
Carl Eugen Hoyos	7c0c97cc05	fate: Fix ffprobe tests with --target-path set.	10 years ago
Janne Grunau	23dfa00b88	fate: explicitly set the default THREADS value This makes the default of '1' more explicit than defaulting to '1' in fate-run.sh and regression-funcs.sh if THREADS is not set. Fixes the reported thread count in fate-cpu if THREADS is not set.	10 years ago
Diego Biurrun	706208ef47	fate: Split fate-pixdesc tests and dispatch them through Make This allows running all the tests individually and/or in parallel.	10 years ago
Christophe Gisquet	8d02a55b1b	tests: add a third, 34x34, target This should exercise the corner cases of numerous codecs. Signed-off-by: Michael Niedermayer <michaelni@gmx.at>	11 years ago
Anton Khirnov	b70d7a4ac7	lavc: add a native Opus decoder. Initial implementation by Andrew D'Addesio <modchipv12@gmail.com> during GSoC 2012. Completion by Anton Khirnov <anton@khirnov.net>, sponsored by the Mozilla Corporation. Further contributions by: Christophe Gisquet <christophe.gisquet@gmail.com> Janne Grunau <janne-libav@jannau.net> Luca Barbato <lu_zero@gentoo.org>	11 years ago
Carl Eugen Hoyos	bb97bcec6b	Fix TARGET_SAMPLES and TARGET_PATH for some fate tests. This allows running more fate tests on remote targets without the source tree.	11 years ago
Janne Grunau	04ffd22030	fate: add xvid test for custom matrices Test sample is made from the sample in Bug-Id: videolan/7411	11 years ago
Anton Khirnov	a8cc88b1a2	tests/Makefile: allow FILTER* to be called with lists of filter names	11 years ago
Vittorio Giovara	eddff165b4	fate: add utility function to test parser, demuxer, and decoder	11 years ago
Guillaume Martres	e1c058dba9	FATE: Add HEVC tests Signed-off-by: Anton Khirnov <anton@khirnov.net>	11 years ago
Michael Niedermayer	712eff4978	fate: add synthetic swresample resampling tests this is based on libavresample.mak These tests do not depend on external samples Signed-off-by: Michael Niedermayer <michaelni@gmx.at>	11 years ago
Guillaume Martres	fb3cea4be3	FATE: add HEVC tests The tests are disabled as 2 do not pass yet (fate-hevc-conformance-PPS_A_qualcomm_7 and fate-hevc-conformance-RAP_A_docomo_4) Signed-off-by: Michael Niedermayer <michaelni@gmx.at>	11 years ago
Anton Khirnov	9ab5f7107d	FATE: add lavr mixing tests	11 years ago
Thilo Borgmann	78d2a781d0	fate: Add EXIF test.	11 years ago
Diego Biurrun	c47037c7a1	fate: Add timefilter test	11 years ago
Diego Biurrun	37063714c0	build: Only check FATE dependencies when running FATE tests Only check dependencies if invoking the make targets 'check' or anything matching 'fate%' except 'fate-rsync'. Signed-off-by: Martin Storsjö <martin@martin.st>	11 years ago
Anton Khirnov	01656fd476	matroskaenc: support muxing WavPack	12 years ago
Martin Storsjö	4a27a52a1f	fate: Don't use files from SRC_PATH in the actual tests If building out of tree, make sure the filter scripts are copied into the build tree before running tests. This makes sure that SRC_PATH doesn't need to exist on the remote system (or doesn't need to exist at the same path). Signed-off-by: Martin Storsjö <martin@martin.st>	12 years ago
Kostya Shishkov	e9e5a1bdc7	Monkey's Audio old versions FATE tests	12 years ago
Reinhard Tartler	95e8ac60f8	build: normalize coverage.info Without this, lcov sometimes misses to normalize paths that contain "/./". Also, ignore uninteresting hits in system headers.	12 years ago
Reinhard Tartler	768e44d044	build: tune down the output of lcov/gcov In the default settings, both tools produce a lot of unhelpful noise.	12 years ago
Clément Bœsch	45734dea9e	fate: port remaining filters to new system. Merge of `b963f021b6` is now complete.	12 years ago
Diego Biurrun	b963f021b6	fate: Invoke pixfmts lavfi tests through fate-run.sh	12 years ago
Diego Biurrun	a77aed142c	fate: Rename video filters file and add separate video filters target	12 years ago
Diego Biurrun	b357f1d1d3	fate: Split audio filters into their own separate file	12 years ago
Diego Biurrun	3eec1d41b4	fate: Reuse VREF and AREF variables where appropriate	12 years ago
Clément Bœsch	64ce15b9f4	lavfi/aevalsrc: switch to an AVOptions-based system.	12 years ago
Michael Niedermayer	ff50b08304	coverage: filter /usr/include out Signed-off-by: Michael Niedermayer <michaelni@gmx.at>	12 years ago
Reinhard Tartler	a862c7d336	Integrate lcov/gcov into Libav The gcov/lcov are a common toolchain for visualizing code coverage with the GNU/Toolchain. The documentation and implementation of this integration was heavily inspired from the blog entry by Mike Melanson: http://multimedia.cx/eggs/using-lcov-with-ffmpeg/	12 years ago
Luca Barbato	b01b60a29d	fate: add an option to generate the references Useful to add or update fate tests.	12 years ago

1 2 3 4 5 ...

301 Commits (5e80a6cd315debe462feaf30b635c07cb0f44abb)