This adds hardware decoding for H.264 / HEVC / VP8 / VP9 using the MPP
Rockchip API. It returns frames holding an AVDRMFrameDescriptor struct
in buf[0] that allows drm / dmabuf usage. Tested on RK3288 (TinkerBoard)
and RK3328.
Signed-off-by: Mark Thompson <sw@jkqxz.net>
This patchset enhances Alexis Ballier's original patch and validates
it using Qualcomm's Venus hardware (driver recently landed upstream
[1]).
This has been tested on Qualcomm's DragonBoard 410c and 820c
Configure/make scripts have been validated on Ubuntu 10.04 and
16.04.
Tested decoders:
- h264
- h263
- mpeg4
- vp8
- vp9
- hevc
Tested encoders:
- h264
- h263
- mpeg4
Tested transcoding (concurrent encoding/decoding)
Some of the changes introduced:
- v4l2: code cleanup and abstractions added
- v4l2: follow the new encode/decode api.
- v4l2: fix display size for NV12 output pool.
- v4l2: handle EOS (EPIPE and draining)
- v4l2: vp8 and mpeg4 decoding and encoding.
- v4l2: hevc and vp9 support.
- v4l2: generate EOF on dequeue errors.
- v4l2: h264_mp4toannexb filtering.
- v4l2: fixed make install and fate issues.
- v4l2: codecs enabled/disabled depending on pixfmt defined
- v4l2: pass timebase/framerate to the context
- v4l2: runtime decoder reconfiguration.
- v4l2: add more frame information
- v4l2: free hardware resources on last reference being released
- v4l2: encoding: disable b-frames for upstreaming (patch required)
[1] https://lwn.net/Articles/697956/
System Level view:
v42l_m2m_enc/dec --> v4l2_m2m --> v4l2_context --> v4l2_buffers
Reviewed-by: Jorge Ramirez <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Alexis Ballier <aballier@gentoo.org>
Tested-by: Jorge Ramirez <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: wm4 <nfxjfg@googlemail.com>
Intended for use with hardware frames for which rawvideo is not
sufficient. Requires the trusted packet flag to be set - decoding
fails if not to avoid security issues (the wrapped AVFrame can
contain pointers to arbitrary data).
This also adds support to avconv (which is trivial due to the new
hwaccel API being generic enough).
The new decoder setup code in dxva2.c is significantly based on work by
Steve Lhomme <robux4@gmail.com>, but with heavy changes/rewrites.
Merges Libav commit f9e7a2f95a.
Also adds untested VP9 support.
The check for DXVA2 COBJs is removed. Just update your MinGW to
something newer than a 5 year old release.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The library has stopped being developed and Debian has removed it
from its repositories citing security issues.
The native Dirac decoder supports everything the library has and basic
encoding support is still provided via the native vc2 (Dirac Pro, intra
only version of Dirac) encoder. Hence, there's no reason to still support
linking to the library and potentially leading users into security issues.
Enables rendering of SVG images. This is possible since SVG images
still contain and specify the dimensions in pixels to which they've
been drawn to and thus enable browsers to display them without any
external data. Users can still override and generate images with
arbitrary resolutions.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Add a codec capable of decoding some formats of the RFC4175. For now
it's only capable of handling YCbCr-4:2:2 with 8-bit or 10-bit depth.
For 8-bit it's a simple pass-through, for 10-bit it depacks the stream
in the AV_PIX_FMT_YUV422P10 pixel format.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Reviewed-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Decodes YUV 4:2:2 10-bit and RGB 12-bit files.
Older files with more subbands, skips, Bayer, alpha not supported.
Further fixes and refactorings by Anton Khirnov <anton@khirnov.net>,
Diego Biurrun <diego@biurrun.de>, Vittorio Giovara <vittorio.giovara@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
This marks the first time anyone has written an Opus encoder without
using any libopus code. The aim of the encoder is to prove how far
the format can go by writing the craziest encoder for it.
Right now the encoder's basic, it only supports CBR encoding, however
internally every single feature the CELT layer has is implemented
(except the pitch pre-filter which needs to work well with the rest of
whatever gets implemented). Psychoacoustic and rate control systems are
under development.
The encoder takes in frames of 120 samples and depending on the value of
opus_delay the plan is to use the extra buffered frames as lookahead.
Right now the encoder will pick the nearest largest legal frame size and
won't use the lookahead, but that'll change once there's a
psychoacoustic system.
Even though its a pretty basic encoder its already outperforming
any other native encoder FFmpeg has by a huge amount.
The PVQ search algorithm is faster and more accurate than libopus's
algorithm so the encoder's performance is close to that of libopus
at zero complexity (libopus has more SIMD).
The algorithm might be ported to libopus or other codecs using PVQ in
the future.
The encoder still has a few minor bugs, like desyncs at ultra low
bitrates (below 9kbps with 20ms frames).
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This decoder can decode all existing SpeedHQ formats (SHQ0–5, 7, and 9),
including correct decoding of the alpha channel.
1080p is decoded in 142 fps on one core of my i7-4600U (2.1 GHz Haswell),
about evenly split between bitstream reader and IDCT. There is currently
no attempt at slice or frame threading, even though the format trivially
supports both.
NewTek very helpfully provided a full set of SHQ samples, as well as
source code for an SHQ2 encoder (not included) and assistance with
understanding some details of the format.
Decode the Image Data Section (which contains merged pictures).
Support RGB/A and Grayscale/A in 8bits and 16 bits per channel.
Support uncompress and rle decompression in Image Data Section.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
There is really no need for two aac wrappers, we already have
libfdk-aac which is better. Not to mention that faac doesn't
even support HEv1, or HEv2. It's also under a license which is
unusable for distribution, so it would only be useful to people
who will compile their own ffmpeg, only use it themselves (which
at that point should just use fdk-aac).
Signed-off-by: Josh de Kock <josh@itanimul.li>
Clément Bœsch
Aman Gupta
Mark Thompson
Lionel CHAZALLON
Jorge Ramirez-Ortiz
Paras Chadha
Carl Eugen Hoyos
foo86
wm4
Paul B Mahol
Rostislav Pehlivanov
James Almer
Damien Riegel
Diego Biurrun
Kieran Kunhya
Muhammad Faiz
Kostya Shishkov
Mark Thompson
Steinar H. Gunderson
Anton Khirnov
Martin Vignali
Philip Langdale
Matthieu Bouron
Josh de Kock