It reduces typing: Before this patch, there were 105 codecs
whose long_name-definition exceeded the 80 char line length
limit. Now there are only nine of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Codecs that can read/write ICC profiles deserve a special capability so
the common logic in encode.c/decode.c can decide whether or not there
needs to be any special handling for ICC profiles. The motivation here
is to be able to use it to decide whether or not an ICC profile needs to
be generated in the encode path, but it might as well get added to
decoders as well for purely informative reasons.
It's not entirely clear to me whether the "thp" and "smvjpeg" variants
of "mjpeg" should have this capability set or not, given that the code
technically supports it but I somehow doubt these files may contain
them. In either case, this cap is purely informative for decoders so it
doesn't matter too much either way.
It's also not entirely clear whether the "amv" encoder should signal ICC
profile support, but again erring on the side of caution, we probably
*shouldn't* be generating (and encoding!) ICC profiles for this type of
media file.
Signed-off-by: Niklas Haas <git@haasn.dev>
and remove FF_CODEC_CAP_INIT_THREADSAFE
All our native codecs are already init-threadsafe
(only wrappers for external libraries and hwaccels
are typically not marked as init-threadsafe yet),
so it is only natural for this to also be the default state.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This commit removes the ineffective FF_MPV_DEPRECATED_ options,
namely mpeg_quant (this is only an option for MPEG-4), a53cc
(this is only an option for MPEG-2), force_duplicated_matrix
(applies only to MJPEG) and b_strategy, b_sensitivity and brd_scale
(these options only make sense for encoders supporting B-frames,
which currently means the MPEG-1/2 and MPEG-4 encoders).
Given that these options never changed the outcome of encoding,
they are removed at once.
Notice that the options for the encoders for which it made sense
are not affected by this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The size of the ICC chunk has already been accounted for when
the packet's buffer was initially set in ff_mpv_encode_picture()
and the header (including the ICC chunk) has already been written
at this point.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is mostly straightforward. The major complication is that, as a
result of the 16-bit chunk size limitation, ICC profiles may need to be
split up into multiple chunks.
We also need to make sure to allocate enough extra space in the packet
to fit the ICC profile, so modify both mpegvideo_enc.c and ljpegenc.c to
take into account this extra overhead, failing cleanly if necessary.
Also add a FATE transcode test to ensure that the ICC profile gets
written (and read) correctly. Note that this ICC profile is smaller than
64 kB, so this doesn't test the APP2 chunk re-arranging code at all.
Signed-off-by: Niklas Haas <git@haasn.dev>
This is possible, because every given FFCodec has to implement
exactly one of these. Doing so decreases sizeof(FFCodec) and
therefore decreases the size of the binary.
Notice that in case of position-independent code the decrease
is in .data.rel.ro, so that this translates to decreased
memory consumption.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In the aforementioned case mpegvideo_enc.c calls
ff_mjpeg_encode_stuffing() at the end of every line which
pads the output to byte-alignment and escapes it;
yet it does not write the restart-markers (and also not
the DRI marker when writing the header) and so the output files
are broken.
Fix this by writing these markers depending upon the number of
slices and not the number of threads in use; this also makes
the output of the encoder reproducible given a slice count
and is therefore important if encoder tests that actually use
-threads auto are added in the future.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Our code for writing optimal huffman tables is incompatible
with using multiple slices and hence commit
884506dfe2 that implemented this
also added an assert that slice_context_count is always 1.
Yet this was always wrong: a) The MJPEG-encoder has (and had)
the AV_CODEC_CAP_SLICE_THREADS capability, so asserting that
it always uses one slice context is incorrect.
b) This commit did not add any proper checks that ensured that
optimal huffman tables are never used together with multiple slices.
This only happened with 03eb0515c1.
c) This assert is at the wrong place: ff_mjpeg_encode_init() is
called before the actual slice_context_count is set. This is
the reason why this assert was never triggered.
Therefore this commit removes this assert.
Also remove an assert from the SpeedHQ encoder sharing b) and c).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, codec.h contains both public and private parts
of AVCodec. This exposes the internals of AVCodec to users
and leads them into the temptation of actually using them
and forces us to forward-declare structures and types that
users can't use at all.
This commit changes this by adding a new structure FFCodec to
codec_internal.h that extends AVCodec, i.e. contains the public
AVCodec as first member; the private fields of AVCodec are moved
to this structure, leaving codec.h clean.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also move FF_CODEC_TAGS_END as well as struct AVCodecDefault.
This reduces the amount of files that have to include internal.h
(which comes with quite a lot of indirect inclusions), as e.g.
most encoders don't need it. It is furthemore in preparation
for moving the private part of AVCodec out of the public codec.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This avoids unnecessary rebuilds of most source files if only the
list of enabled components has changed, but not the other properties
of the build, set in config.h.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is possible now that MJpegContext is allocated jointly
with MpegEncContext as part of the AVCodecContext's private data.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This factors the translation from MpegEncContext out
and will enable further optimizations in the next commits.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently, ff_mpv_encode_end() is the close function of
the two MJPEG-based encoders; it calls ff_mjpeg_encode_close()
for them which adds a check to the generic code.
This commit reverses the order of this relationship:
The MJPEG encoders directly use a custom close function
which in turn calls ff_mpv_encode_end(). This avoids the branch
in ff_mpv_encode_end() and makes the generic code more generic.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There are seven MJPEG-tables, five small (1x12, 4x17) and two
not small (2x162). These are all avpriv, despite this not being
worthwhile due to the overhead of exporting a symbol: The total
overhead for each symbol consists of two entries in .dynsym (24B each),
one entry in the importing library's .rela.dyn (24B) and one in .got
(8B) as well as 2x2B for symbol versions and 4B for symbol hashes
in the exporting library; in addition to that, the name of the symbol
is included in both exporting and importing libraries, using 2x210 bytes
in this case.
(The above numbers are for a x64 Elf/Linux/GNU system. Other platforms
will give different numbers.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Given that the AVCodec.next pointer has now been removed, most of the
AVCodecs are not modified at all any more and can therefore be made
const (as this patch does); the only exceptions are the very few codecs
for external libraries that have a init_static_data callback.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
MPEG-1/2/4 are the only mpegvideo based encoders that support bframes;
yet even the encoders not supporting bframes have options that only make
sense for an encoder that supports bframes; setting any of these options
for such an encoder has no impact on the encoded outcome (but setting
b_strategy to two slows down encoding considerably). So deprecate these
options.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The MPEG-2 encoder is the only mpegvideo-based encoder that supports
embedding a53 side data.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
mpeg_quant may only be set for MPEG-4 and MPEG-2, yet for the latter
it is no option as the code acts as if it were always set.
So deprecate the option for all codecs for which it makes no sense.
Furthermore, given that the code already errors out if the option is set
for a codec that doesn't support it we can restrict the range of
the option for all these codecs without breaking something. This means
that the checks for whether mpeg_quant is set for these codecs can be
removed as soon as AVCodecContext.mpeg_quant is removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently said list contains only the pixel formats that are always
supported irrespective of the range and the value of
strict_std_compliance. This makes the MJPEG encoder an outlier as all
other codecs put all potentially supported pixel formats into said list
and error out if the chosen pixel format is unsupported. This commit
brings it therefore in line with the other encoders.
The behaviour of fftools/ffmpeg_filter.c has been preserved. A more
informed decision would be possible if colour range were available
at this point, but it isn't.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Using optimal Huffman tables is not supported for AMV and always
disabled by ff_mpv_encode_init(); therefore one can build
the AMV encoder without mjpegenc_huffman if one adds the necessary
compile-time checks.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When allocating the MJpegContext fails (or if the dimensions run afoul
of the 65500x65500 limit), an attempt to free a subbuffer of said
context leads to a segfault in ff_mjpeg_encode_close().
Seems to be a regression since 467d9e27e0.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This allows to make ff_init_uni_ac_vlc static;
ff_mjpeg_encode_picture_frame has also been made static, but it could
always have been made static.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This is a prerequisite for making any encoder that uses
ff_mpv_encode_init() init-threadsafe; it already makes the AMV,
the MJPEG and the MPEG-1/2 encoders init-threadsafe.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
then ff_mpv_encode_end() will be unnecessary in ff_mpv_encode_init()
if it's failed.
The FF_CODEC_CAP_INIT_CLEANUP flag is need for single thread, For multithread,
it'll be cleanup still by AV_CODEC_CAP_FRAME_THREADS flag if have.
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
Both are codec properties and not encoder capabilities. The relevant
AVCodecDescriptor.props flags exist for this purpose.
Signed-off-by: James Almer <jamrial@gmail.com>
As it gives excellent encoding gains at an insignificant speed increase
and passes fate without problems, it should now be safe to enable by
default.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
This limits the bugs, speedloss and extra memory allocation to the case when
optimal tables are needed.
Fixes regressions with slice multi-threading
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
If this is wanted iam not against it but it must be designed to work with all cases
like slice threads, and a single growing buffer does not work very well with slices.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Andreas Rheinhardt
Niklas Haas
Martin Storsjö
Andreas Rheinhardt
Limin Wang
James Almer
Vittorio Giovara
Davinder Singh
Rostislav Pehlivanov
Michael Niedermayer
Jerry Jiang
Diego Biurrun
Derek Buitenhuis