The previous code here did not handle passing a frames context when
ffmpeg itself did not know about the device it came from (for example,
because it was created by device derivation inside a filter graph), which
would break encoders requiring that input. Fix that by checking for HW
frames and device context methods independently, and prefer to use a
frames context method if possible. At the same time, revert the encoding
additions to the device matching function because the additional
complexity was not relevant to decoding.
Also fixes#8637, which is the same case but with the device creation
hidden in the ad-hoc libmfx setup code.
This can support encoders which want frames and/or device contexts. For
the device case, it currently picks the first initialised device of the
desired type to give to the encoder - a new option would be needed if it
were necessary to choose between multiple devices of the same type.
The data of an attachment file is put into an AVCodecParameter's
extradata. The corresponding size field has type int, yet there was no
check for the size to fit into an int. As a consequence, it was possible
to create extradata with negative size (by using a big enough max_alloc).
Other errors were also possible: If SIZE_MAX < INT64_MAX (e.g. on 32bit
systems) then the file size might be truncated before the allocation;
and avio_read() takes an int, too, so one would not have read as much
as one desired.
Furthermore, the extradata is now padded as is required.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When QSV is enabled in FFmpeg, the command "ffmpeg -hwaccels" shows a
duplicate entry in acceleration methods for QSV:
Hardware acceleration methods:
vaapi
qsv
drm
opencl
qsv
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
PRId64 and PRIu64 already expand to the complete specifier; adding
another 'd' at the end is wrong and just leads to warnings that say
that only an option like '-frames:v 2d' will be used, although said
option won't be accepted at all ('Expected int64 for frames:v but found
2d').
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Each time the sub2video structure is initialized, the sub2video
subpicture is initialized together with the first received heartbeat.
The heartbeat's PTS is utilized as the subpicture start time.
Additionally, add some documentation on the stages.
It's a duplicate of the properly implemented nvdec libavcodec hwaccel
Reviewed-by: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes#8094.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -9223372036854775808 - 9223372036854775807 cannot be represented in type 'long'
Fixes: Ticket8142
Found-by: Suhwan
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
For audio packets with dts != AV_NOPTS_VALUEs the dts was converted
twice to the muxer's timebase during streamcopy, once as a normal
packet and once specifically as an audio packet. This has been changed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
fix crash when used the command like:
- ffmpeg -h protocol
- ffmpeg -h protocol=
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
After 06ec9c4746 we check for these
functions in configure (which will succeed in cygwin), but cmdutils.c
only includes windows.h if _WIN32 is defined (which it isn't in cygwin).
Retain the old intent from before 06ec9c4746,
that these functions only would be used when _WIN32 is defined, while
only using them if configure has agreed that they do exist.
Signed-off-by: Martin Storsjö <martin@martin.st>
Before this fix, ffmpeg -h full | grep map get the command dump
like:
-map [-]input_file_id[:stream_specifier][,sync_file_id[:stream_s set input stream mapping
^
|
truncated
after this fix, we can get full option dump.
Found-by: vacingfang <vacingfang@tencent.com>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
CPB side_data is copied when stream-copying (see init_output_stream_streamcopy()),
but it shall not be copied when the stream is decoded.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In these cases, we must pass the full path of the file to ffprobe
(as the current working dir on the remote system, e.g. when invoked
with "ssh remote ffprobe ..." isn't the wanted one).
The input filename passed to ffprobe is also included in the output,
which is part of the reference test data. Add a new option to
ffprobe to allow overriding what path is printed, to keep the
original relative path in the tests.
An alternative approach could be an option to allow requesting omitting
the file name from the dumped data, and updating the test references
accordingly.
Signed-off-by: Martin Storsjö <martin@martin.st>
These functions aren't available when building for the restricted
UWP/WinRT/WinStore API subsets.
Normally when building in this mode, one is probably only building
the libraries, but being able to build ffmpeg.exe still is useful
(and a ffmpeg.exe targeting these API subsets still can be run
e.g. in wine, for testing).
Signed-off-by: Martin Storsjö <martin@martin.st>
Freeing this was forgotten in ad899522.
Fixes#8315 and #8316.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
add error handle if av_asprintf return null.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
The "type" entry was hardcoded with an trailing comma, even if it was
the only entry in the section.
Fixes ticket #8228.
Signed-off-by: James Almer <jamrial@gmail.com>
do_streamcopy() has a packet that gets zero-initialized first, then gets
initialized via av_init_packet() after which some of its fields are
oerwritten again with the actually desired values (unless it's EOF): The
side data is copied into the packet with av_copy_packet_side_data() and
if the source packet is refcounted, the packet will get a new reference
to the source packet's data. Furthermore, the flags are copied and the
timestamp related fields are overwritten with new values.
This commit replaces this by using av_packet_ref() to both initialize
the packet as well as populate its fields with the right values (unless
it's EOF again in which case the packet will still be initialized). The
differences to the current approach are as follows:
a) There is no call to a deprecated function (av_copy_packet_side_data())
any more.
b) Several fields that weren't copied before are now copied from the source
packet to the new packet (e.g. pos). Some of them (the timestamp related
fields) may be immediately overwritten again and some don't seem to be
used at all (e.g. pos), but in return using av_packet_ref() allows to forgo
the initializations.
c) There was no check for whether copying side data fails or not. This
has been changed: Now the program is exited in this case.
Using av_packet_ref() does not lead to unnecessary copying of data,
because the source packets are already always refcounted (they originate
from av_read_frame()).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Limin Wang
Mark Thompson
Marton Balint
vectronic
Peter Ross
Jun Zhao
Anton Khirnov
Andreas Rheinhardt
Carl Eugen Hoyos
Michael Niedermayer
Gyan Doshi
Paul B Mahol
Jan Ekström
Timo Rothenpieler
James Almer
Steven Liu
Martin Storsjö
Zhao Zhili
Nicolas Gaullier
Lou Logan