The NUT and avi demuxers only need ff_codec_movvideo_tags and so this
removes a dependency on the rest of isom.c as well as on mpeg4audio.c
(which isom depends on); it is similar for the Matroska demuxer and
muxers, except that the mpeg4audio.c dependency can't be avoided.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This is a result of the mov channel parsing stuff being factored out
of mov.c twice: Once in 91b782720f
to isom.c and later in 3bab7cd128.
Also remove the isom.h header; and while just at it, remove an unused
mathematics.h inclusion.
(isom.c actually depends upon mpeg4audio from libavcodec for
avpriv_mpeg4audio_get_config2 and avpriv_mpa_freq_tab; yet there is
no configure dependency for iso_media which leads to failure of shared
builds.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
It only existed because some code in mjpegenc_common.c relied on it;
yet said code was actually only used by mjpegenc.c and has been moved
there.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This allows to make ff_init_uni_ac_vlc static;
ff_mjpeg_encode_picture_frame has also been made static, but it could
always have been made static.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Since g2meet.c doesn't use it any more, only encoders use it and
the place for their common code is mjpegenc_common.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
While just at it, remove the nb_codes parameter: It is redundant
(the number of codes is implicitly contained in the array containing how
many entries of a specific size there are) and for this reason it might
even be wrong, so it is better to check what is actually used instead.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The MJPEG decoder is already activated by configure whenever the tiff
decoder is selected; ergo it is unnecessary to add a dependency in the
Makefile.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The avrn decoder actually only needs one thing: The MJPEG decoder.
Instead the Makefile made it compile mjpegdec and configure required
some of the prerequisites of the MJPEG decoder (exif and jpegtables).
Even if all the prerequisites of the MJPEG decoder were required, it
would still not make the MJPEG decoder usable, because for that
the MJPEG decoder needs to be in the list of codecs in codec_list.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Add inline function for vec_xl if VSX is not supported. vec_xl intrinsic
is only available on POWER 7 or higher.
Fixes ticket #8750.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Neither the feature, public fields, or AVOptions were ever truly deprecated,
nor will have been removed if this FF_API_ define was left in place, so
get rid of it as it's misleading.
Signed-off-by: James Almer <jamrial@gmail.com>
Zero is the recommended value in Nvidia coding samples for low latency use-cases.
Signed-off-by: Michal Novotny <michal.novotny@comprimato.com>
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
The FF_API macros are private and must not be used by external callers.
As the fields in question are to be removed without replacement, just
drop them.
The fields are:
AVPacket.convergence_duration
AVCodecContext.time_base
AVCodecContext.timecode_frame_start
AV_PIX_FMT_FLAG_PSEUDOPAL pixel descriptor flag
The current behaviour ends up squaring the avg_frame_rate if the conter mode flag is set.
This messes up the timecode calculation, and looks to me as a regression that
seems to have been introduced 428b4aac.
Upon further testing is seems that no special case is need for having the counter flag set.
av_timecode_init appears to handles the timecode correctly, at least in the sample files
I have.
Here is a sample mov file with the counter flag set
https://www.dropbox.com/s/5l4fucb9lhq523s/timecode_counter_mode.mov
before the patch ffmpeg will report the timecode as:
00:37:11:97 and warns that the timecode framerate is 576000000/1002001
after patch:
14:50:55:02
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This provides coverage for writing BlockGroups with BlockAdditional
and ReferenceBlock elements. It also tests setting the hearing impaired
disposition (it fits given that this video has no audio so one needs to
be able to read lips to understand anything).
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This is the Matroska equivalent of D_WEBVTT_DESCRIPTIONS and is
therefore only enabled for subtitles.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This is the equivalent of the WebM "D_WEBVTT/DESCRIPTIONS" and is
therefore only exported for subtitles.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Given that our disposition flags provide no way to distinguish the
cases of "track is unsuitable for hearing impaired users" and "it is
unknown whether the track is suitable for hearing impaired users" we do
not need to use a CountedElement for these flags.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Hint: Matroska actually provides a way to distinguish the cases of
"track is no commentary track" and "it is unknown whether the track
is a commentary track", but our disposition flags do not. Therefore
we need not use a CountedElement.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
For a very long time, the payload of integer and float elements had to
have a length > 0. Our parser treated such invalid elements as having a
value zero. But now it has been defined what an EBML element with length
zero means: It is a shorthand for the default value. This has also been
defined for strings (both ASCII and UTF-8). This commit modifies our
parser to support this.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This has been done in order to find out whether this element is present
at all; but this can now be done in a cleaner way by using a CountedElement
for it.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
According to the new EBML specifications, a string element of length
zero would be read as the default value by a compliant parser.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
In the absence of an explicitly coded minimal luminance, the current
code inferred it to be -1, an invalid value. Yet it did not check the
value lateron at all, so that if a valid maximum luminance is
encountered, but no minimal luminance, an invalid minimal luminance of
-1 is exported. If an minimal luminance element with a negative value is
present, it is exported, too. This can be simply fixed by adding a check
for the value of the element.
Yet given that a minimal luminance of zero Cd/m² is legal and can be
coded with a length of zero, we must not use a fake default value to
find out whether the element is present or not. Therefore this patch
uses an explicit counter for it.
While just at it, also check for max_luminance > min_luminance.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Up until now, the generic EBML reader used by the Matroska demuxer did
not have the capability to record whether an element was actually
present or not; instead, in cases where it mattered one typically added
an invalid default value and checked whether the value is valid (in
which case it is guaranteed to be present). This worked pretty well so
far, yet the EBML specifications have evolved: It is now legal to use
zero-length elements for floats, ints, uints and strings (both ASCII and
UTF-8); the value of these elements is the default value of the element
(if it has one) or zero for scalar types and an empty string for
strings. Furthermore, having a default value does no longer imply that
the element may be presumed to be present (with its default value) if it
is absent; this is only true if the element is mandatory, too.
These rules are designed to allow size savings as follows: Consider the
newly added FlagOriginal: It being zero means the track is not in its
original language, it being one means it is. For backward compatibility
reasons, neither of the two values may be inferred automatically in the
absence of the element. But one can still save a byte when one wants to
write the element with a value of zero, as one can write the integer with
a length of zero: 0x55AE 80 instead of 0x55AE 81 00. In the former case,
a parser has to infer the value of the element to be zero (which is the
element's default value).
When encountering an element with length zero, our parser always infers
a value of zero (or an empty string); this is wrong for values with
a different default value. It needs to infer the default value (or zero
in its absence) and this precludes using an invalid default value for
elements like FlagOriginal. Ergo one needs to be able to record whether
an element is present or not by other means. This patch allows to use a
simple counter for this. While just at it, some invalid and unnecessary
default values have been removed (mastering metadata elements used
default values of -1.0, despite these elements only being used if they
are > 0).
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The FATE suite already contains a file containing mastering display
and content light level metadata: Meridian-Apple_ProResProxy-HDR10.mxf
This file is used to test both the Matroska muxer and demuxer.
Reviewed-by: Ridley Combs <rcombs@rcombs.me>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Fixes: signed integer overflow: 7 - -2147483647 cannot be represented in type 'int'
Fixes: 28036/clusterfuzz-testcase-minimized-ffmpeg_dem_MICRODVD_fuzzer-5171698751766528
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is much less precise than the cycle counter register, but
the cycle counter register is not available on apple platforms
(and on linux, it requires a kernel module for allowing user mode
access).
Signed-off-by: Martin Storsjö <martin@martin.st>
This commit adds support for in-place FFT transforms. Since our
internal transforms were all in-place anyway, this only changes
the permutation on the input.
Unfortunately, research papers were of no help here. All focused
on dry hardware implementations, where permutes are free, or on
software implementations where binary bloat is of no concern so
storing dozen times the transforms for each permutation and version
is not considered bad practice.
Still, for a pure C implementation, it's only around 28% slower
than the multi-megabyte FFTW3 in unaligned mode.
Unlike a closed permutation like with PFA, split-radix FFT bit-reversals
contain multiple NOPs, multiple simple swaps, and a few chained swaps,
so regular single-loop single-state permute loops were not possible.
Instead, we filter out parts of the input indices which are redundant.
This allows for a single branch, and with some clever AVX512 asm,
could possibly be SIMD'd without refactoring.
The inplace_idx array is guaranteed to never be larger than the
revtab array, and in practice only requires around log2(len) entries.
The power-of-two MDCTs can be done in-place as well. And it's
possible to eliminate a copy in the compound MDCTs too, however
it'll be slower than doing them out of place, and we'd need to dirty
the input array.
Andreas Rheinhardt
Chip Kerchner
James Almer
Michael Niedermayer
Matt Oliver
Michal Novotny
Ricardo Monteiro
Anton Khirnov
Mark Reid
Martin Storsjö
Lynne