It is only used by encoders; in fact, AVCodecContext.time_base
is only used by encoders, so it is only useful for encoders.
Also constify the AVCodecContext parameter in it.
Also fixup the other headers a bit while removing now unnecessary
internal.h inclusions.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Decoder-only, as the dimensions are set by the user when encoding.
Also fixup the other headers a bit while removing unnecessary internal.h
inclusions.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Only used by decoders (encoders have ff_encode_alloc_frame()).
Also clean up the other headers a bit while removing now redundant
internal.h inclusions.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Only used by decoders.
Also clean up the headers a bit while removing now unnecessary
internal.h inclusions.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Handling this in general code makes more sense than handling it in
individual codec files, because it would be a lot of unnecessary code
duplication for the plenty of formats that support exporting ICC
profiles (jpg, png, tiff, webp, jxl, ...).
encode.c and decode.c will be in charge of initializing this state as
needed, so we merely need to make sure to uninit it afterwards from the
common destructor path.
Signed-off-by: Niklas Haas <git@haasn.dev>
The amount of padding samples reported by containers take into account the
extended samplerate in HE-AAC.
Fixes ticket #9671.
Signed-off-by: James Almer <jamrial@gmail.com>
The general decoding API uses bitstream filters and an AVFifo
and therefore AVCodecInternal contains pointers to an AVBSFContext
and to an AVFifo and lavc/internal.h includes lavc/bsf.h and
lavu/fifo.h.
Yet actually, only two files are supposed to use these, namely
avcodec.c and (mainly) decode.c. For all the other files,
it should be an opaque type that they should not touch and that
they need not know anything about. This can be achieved by not
including these headers and using the structs instead of the
corresponding typedefs.
This also forces translation units that really use the BSF
and the FIFO APIs themselves to include the relevant headers
directly instead of relying on indirect inclusions (up until now,
even avcodec.c and decode.c relied on fifo.h to be included
by internal.h).
Of course, it also avoids unnecessary rebuilds when bsf.h or fifo.h
change.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is a more fitting place for them.
Also move the definition of ff_log2_run to mathtables.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, codec.h contains both public and private parts
of AVCodec. This exposes the internals of AVCodec to users
and leads them into the temptation of actually using them
and forces us to forward-declare structures and types that
users can't use at all.
This commit changes this by adding a new structure FFCodec to
codec_internal.h that extends AVCodec, i.e. contains the public
AVCodec as first member; the private fields of AVCodec are moved
to this structure, leaving codec.h clean.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also move FF_CODEC_TAGS_END as well as struct AVCodecDefault.
This reduces the amount of files that have to include internal.h
(which comes with quite a lot of indirect inclusions), as e.g.
most encoders don't need it. It is furthemore in preparation
for moving the private part of AVCodec out of the public codec.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Since the request_channel_layout is used only by a handful of codecs,
move the option to codec private contexts.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: James Almer <jamrial@gmail.com>
This is by definition the appropriate place for it.
Remove all the now unnecessary libavcodec/internal.h inclusions;
also remove other unnecessary headers from the affected files.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This function is quite small (96B with GCC 11.2 on x64 Ubuntu 21.10
at -O3), making it more economical to duplicate it into libavformat
instead of exporting it as avpriv: Doing so saves 2x24B in .dynsim,
2x16B in .dynstr, 2x2B .gnu.version, 24B in .rela.plt, 16B in .plt,
16B in .plt.sec (if enabled), 4B .gnu.hash; besides the actual
duplicated code this also adds 2x8B .eh_frame_hdr and 24B .eh_frame.
In other words: Duplicating is neutral size-wise (it is also presumed
neutral for other systems). Given that it avoids the runtime
overhead of dynamic symbols, it is advantageouos to duplicate the
function.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Decoders implementing the receive_frame API currently mostly use
stack packets to temporarily hold the packet they receive from
ff_decode_get_packet(). This role directly parallels the role of
in_pkt, the spare packet used in decode_simple_internal for the
decoders implementing the traditional decoding API. Said packet
is unused by the generic code for the decoders implementing the
receive_frame API, so allow them to use it to fulfill the function
it already fulfills for the traditional API for both APIs.
There is only one caveat in this: The packet is automatically
unreferenced in avcodec_flush_buffers(). But this is actually
positive as it means the decoders don't have to do this themselves
(in case the packet is preserved between receive_frame calls).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Currently, the AV_PKT_FLAG_KEY is automatically set for audio encoders;
yet this is wrong, as both MLP and TrueHD have non-keyframes. So set it
based upon AV_CODEC_PROP_INTRA_ONLY (from the corresponding
AVCodecDescriptor) instead. This also sets it for some video codecs,
which is intended.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is also used by libavfilter and it is only natural to define it
alongside ff_dlog().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Decoders like cuviddec ignore and overwrite all the properties set by the generic
code as derived from AVCodecInternal.last_pkt_props. This flag ensures libavcodec
will not store and potentially queue input packets that ultimately will not be used.
Signed-off-by: James Almer <jamrial@gmail.com>
Up until now, ff_alloc_packet2() has a min_size parameter:
It is supposed to be a lower bound on the final size of the packet
to allocate. If it is not too far from the upper bound (namely,
if it is at least half the upper bound), then ff_alloc_packet2()
already allocates the final, already refcounted packet; if it is
not, then the packet is not refcounted and its data only points to
a buffer owned by the AVCodecContext (in this case, the packet will
be made refcounted in encode_simple_internal() in libavcodec/encode.c).
The goal of this was to avoid data copies and intermediate buffers
if one has a precise lower bound.
Yet those encoders for which precise lower bounds exist have recently
been switched to ff_get_encode_buffer() (which automatically allocates
final buffers), leaving only two encoders to actually set the min_size
to something else than zero (namely aliaspixenc and hapenc). Both of
these encoders use a very low lower bound that is not helpful in any
nontrivial case.
This commit therefore removes the min_size parameter as well as the
codepath in ff_alloc_packet2() for the allocation of final buffers.
Furthermore, the function has been renamed to ff_alloc_packet() and
moved to encode.h alongside ff_get_encode_buffer().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Right now all AVCodecContexts except those using frame-threaded decoding
call the codec's init function and expect its close function to be
called. In order to make sure that the close function is not called for
frame-threaded decoding ff_frame_thread_free() resets
AVCodecContext.codec (and because of this it has to free the private
AVOptions of the main AVCodecContext itself). This is not obvious and
potentially fragile. Instead add a field to AVCodecInternal that
indicates whether close should be called for this AVCodecContext.
It is always zero when using frame-threaded decoding, so that resetting
the codec is no longer necessary and has been removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Deprecated in commits 7fc329e2dd
and 31f6a4b4b8.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
AV_CODEC_CAP_AUTO_THREADS was originally added in b4d44a45f9 to mark
codecs that spawn threads internally and are able to select an optimal
threads count by themselves (all such codecs are wrappers around
external libraries). It is used by lavc generic code to check whether it
should handle thread_count=0 itself or pass the zero directly to the
codec implementation. Within this meaning, it is clearly supposed to be
an internal cap rather than a public one, since from the viewpoint of a
libavcodec user, lavc ALWAYS handles thread_count=0. Whether it happens
in the generic code or within the codec internals is not a meaningful
difference for the caller.
External aspects of this flag will be dealt with in the following
commit.
It has been deprecated for 4 years and certain new codecs do not work
with it.
Also include AVCodecContext.refcounted_frames, as it has no effect with
the new API.
This function existed to enable codecs with non-threadsafe init functions
to initialize other codecs despite the fact that normally no two codecs
with non-threadsafe init functions can be initialized at the same time
(there is a mutex guarding this). Yet there are no users of this
function any more as all users have been made thread-safe (switching
away from ff_codec_open2_recursive() was required for this as said
function requires the caller to hold the lock to the mutex guarding the
initializations and this is only true for codecs with the
FF_CODEC_CAP_INIT_THREADSAFE flag unset); so remove it.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Keeping only the latest packet fed to the decoder works only for decoders that
return a frame immediately after every consumed packet. Decoders that consume
several packets before they return a frame will fill said frame with properties
taken from the last consumed packet instead of the earliest.
Signed-off-by: James Almer <jamrial@gmail.com>
Following the same logic as 061a0c14bb, this commit turns the old encode API
into a wrapper for the new one.
Signed-off-by: James Almer <jamrial@gmail.com>
This commit follows the same logic as 061a0c14bb, but for the encode API: The
new public encoding API will no longer be a wrapper around the old deprecated
one, and the internal API used by the encoders now consists of a single
receive_packet() callback that pulls frames as required.
amf encoders adapted by James Almer
librav1e encoder adapted by James Almer
nvidia encoders adapted by James Almer
MediaFoundation encoders adapted by James Almer
vaapi encoders adapted by Linjie Fu
v4l2_m2m encoders adapted by Andriy Gelman
Signed-off-by: James Almer <jamrial@gmail.com>
James Almer
Andreas Rheinhardt
Anton Khirnov
Niklas Haas
Vittorio Giovara
Andreas Rheinhardt
Limin Wang