This way the CLI accepts for "filter_threads" the same values as for the
libavcodec specific option "threads".
Fixes FATE with THREADS=auto which was broken in bdc1bdf3f5.
Signed-off-by: James Almer <jamrial@gmail.com>
These were intended to pass options to auto-inserted avresample
resampling filters. Yet FFmpeg uses swresample for this purpose
(with its own AVDictionary swr_opts similar to resample_opts).
Therefore said options were not forwarded any more since commit
911417f0b34e611bf084319c5b5a4e4e630da940; moreover since commit
420cedd497 avresample options are
not even recognized and ignored any more. Yet there are still
remnants of all of this. This commit gets rid of them.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This allows user set hw_device_ctx instead of hw_frames_ctx for QSV
decoders, hence we may remove the ad-hoc libmfx setup code from FFmpeg.
"-hwaccel_output_format format" is applied to QSV decoders after
removing the ad-hoc libmfx code. In order to keep compatibility with old
commandlines, the default format is set to AV_PIX_FMT_QSV, but this
behavior will be removed in the future. Please set "-hwaccel_output_format qsv"
explicitly if AV_PIX_FMT_QSV is expected.
The normal device stuff works for QSV decoders now, user may use
"-init_hw_device args" to initialise device and "-hwaccel_device
devicename" to select a device for QSV decoders.
"-qsv_device device" which was added for workarounding device selection
in the ad-hoc libmfx code still works
For example:
$> ffmpeg -init_hw_device qsv=qsv:hw_any,child_device=/dev/dri/card0
-hwaccel qsv -c:v h264_qsv -i input.h264 -f null -
/dev/dri/renderD128 is actually open for h264_qsv decoder in the above
command without this patch. After applying this patch, /dev/dri/card0
is used.
$> ffmpeg -init_hw_device vaapi=va:/dev/dri/card0 -init_hw_device
qsv=hw@va -hwaccel_device hw -hwaccel qsv -c:v h264_qsv -i input.h264
-f null -
device hw of type qsv is not usable in the above command without this
patch. After applying this patch, this command works as expected.
Reviewed-by: Soft Works <softworkz@hotmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
11d3b03fcb added consideration of default stream disposition for audio
and video when choosing the 'best' stream among all the inputs. This can
lead to video streams with lower resolution or audio streams with fewer
channels being selected.
Stream disposition, however, only sets a priority for a stream
among all other streams in the *same input*. It cannot set a priority
for a stream across all inputs.
This patch sets a middle-way and selects the best stream from each file
with default disposition considered. Then it discards disposition weight
and selects best stream as per the original criteria of highest
resolution for video and most channels for audio.
Use AVSTREAM_EVENT_FLAG_NEW_PACKETS instead, which should provide the
same information in this case.
Finishes removing all uses of this field as started by 87f0c8280c.
Signed-off-by: James Almer <jamrial@gmail.com>
This also allows to exclusively use pointers to const AVCodec in
fftools/ffmpeg_opt.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
The obstacle to do so was in filter_codec_opts: It uses searches
the AVCodec for options via the AV_OPT_SEARCH_FAKE_OBJ method, which
requires using a void * that points to a pointer to a const AVClass.
When using const AVCodec *, one can not simply use a pointer that points
to the AVCodec's pointer to its AVClass, as said pointer is const, too.
This is fixed by using a temporary pointer to the AVClass.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The metadata company_name, product_name, product_version from input
file will be deleted to avoid overwriting information
Please to test with below commands:
./ffmpeg -i ../fate-suite/mxf/Sony-00001.mxf -c:v copy -c:a copy out.mxf
and
./ffmpeg -i ../fate-suite/mxf/Sony-00001.mxf -c:v copy -c:a copy \
-metadata company_name="xxx" \
-metadata product_name="xxx" \
-metadata product_version="xxx" \
out.mxf
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
The st->codec values are updated based on the lowres factor by
avformat_find_stream_info() when it runs an instance of the decoder internally,
and the same thing happens in ffmpeg.c when we open ist->dec_ctx with
avcodec_open2(), so these assignments are redundant.
Signed-off-by: James Almer <jamrial@gmail.com>
At present, progress stats are updated at a hardcoded interval of
half a second. For long processes, this can lead to bloated
logs and progress reports.
Users can now set a custom period using option -stats_period
Default is kept at 0.5 seconds.
This way the old max queue size limit based behavior for streams
where each individual packet is large is kept, while for smaller
streams more packets can be buffered (current default is at 50
megabytes per stream).
For some explanation, by default ffmpeg copies packets from before
the appointed seek point/start time and puts them into the local
muxing queue. Before, it getting utilized was much less likely
since as soon as the filter chain was initialized, the encoder
(and thus output stream) was also initialized.
Now, since we will be pushing the encoder initialization to when the
first AVFrame is decoded and filtered - which only happens after
the exact seek point is hit as packets are ignored until then -
this queue will be seeing much more usage.
In more layman's terms, this attempts to fix cases such as where:
- seek point ends up being 5 seconds before requested time.
- audio is set to copy, and thus immediately begins filling the
muxing queue.
- video is being encoded, and thus all received packets are skipped
until the requested time is hit.
Threaded input can increase smoothness of e.g. x11grab significantly. Before
this patch, in order to activate threaded input the user had to specify a
"dummy" additional input, with this change it is no longer required.
Signed-off-by: Marton Balint <cus@passwd.hu>
Currently, ffmpeg inserts scale filter by default in the filter graph
to force the whole decoded stream to scale into the same size with the
first frame. It's not quite make sense in resolution changing cases if
user wants the rawvideo without any scale.
Using autoscale/noautoscale as an output option to indicate whether auto
inserting the scale filter in the filter graph:
-noautoscale or -autoscale 0:
disable the default auto scale filter inserting.
ffmpeg -y -i input.mp4 out1.yuv -noautoscale out2.yuv -autoscale 0 out3.yuv
Update docs.
Suggested-by: Mark Thompson <sw@jkqxz.net>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
Signed-off-by: Linjie Fu <linjie.fu@intel.com>
The data of an attachment file is put into an AVCodecParameter's
extradata. The corresponding size field has type int, yet there was no
check for the size to fit into an int. As a consequence, it was possible
to create extradata with negative size (by using a big enough max_alloc).
Other errors were also possible: If SIZE_MAX < INT64_MAX (e.g. on 32bit
systems) then the file size might be truncated before the allocation;
and avio_read() takes an int, too, so one would not have read as much
as one desired.
Furthermore, the extradata is now padded as is required.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
When QSV is enabled in FFmpeg, the command "ffmpeg -hwaccels" shows a
duplicate entry in acceleration methods for QSV:
Hardware acceleration methods:
vaapi
qsv
drm
opencl
qsv
Reviewed-by: Mark Thompson <sw@jkqxz.net>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
PRId64 and PRIu64 already expand to the complete specifier; adding
another 'd' at the end is wrong and just leads to warnings that say
that only an option like '-frames:v 2d' will be used, although said
option won't be accepted at all ('Expected int64 for frames:v but found
2d').
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
It's a duplicate of the properly implemented nvdec libavcodec hwaccel
Reviewed-by: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: James Almer <jamrial@gmail.com>
Fixes#8094.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
add error handle if av_asprintf return null.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Respect default disposition when select audio/video
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Jun Zhao <barryjzhao@tencent.com>
Fully discarded streams can't be selected for output or mapped or filtered.
Previously, a few packets from such streams, probably buffered for
stream probing, would get smuggled into output files.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
James Almer
Andreas Rheinhardt
Haihao Xiang
Gyan Doshi
Andreas Rheinhardt
Limin Wang
Jan Ekström
Anton Khirnov
Nicolas George
Marton Balint
Linjie Fu
Mark Thompson
Jun Zhao
Timo Rothenpieler
Steven Liu
Carl Eugen Hoyos
Lou Logan
xiaofeng