Currently, when writing PCMA or PCMU tracks with FLV or RTMP, the
stereo flag and sample rate flag inside RTMP audio messages are
overridden, making impossible to distinguish between mono and stereo
tracks. This patch fixes the issue by restoring the same flag mechanism
of all other codecs, that takes into consideration the right channel
count and sample rate.
Signed-off-by: Alessandro Ros <aler9.dev@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Unnecessary since acf63d5350adeae551d412db699f8ca03f7e76b9;
also avoids relocations.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When encoders don't support global header like MediaCodec, FLV
muxer needs to add extract_extradata bsf automatically. The codec
list doesn't include VP9 since it's not supported by
extract_extradata.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
FLV spec only has AVC end of sequence tag, and the EOS tag has a
CodecID as other video data packet. MPEG4 doesn't conformance to
the spec, but it's there for a decade. So only 'fix' the EOS tag
rather than remove it completely.
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
This commit does for AVOutputFormat what commit
20f9727018 did for AVCodec:
It adds a new type FFOutputFormat, moves all the internals
of AVOutputFormat to it and adds a now reduced AVOutputFormat
as first member.
This does not affect/improve extensibility of both public
or private fields for muxers (it is still a mess due to lavd).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
The general demuxing API uses parsers and decoders. Therefore
FFStream contains pointers to AVCodecContexts and
AVCodecParserContext and lavf/internal.h includes lavc/avcodec.h.
Yet actually only a few files files really use these; and it is best
when this number stays small. Therefore this commit uses opaque
structs in lavf/internal.h for these contexts and stops including
avcodec.h.
This also avoids including lavc/codec_desc.h implicitly. All other
headers are implicitly included as now (mostly through codec.h).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Firstly, the timestamps generated from framerate are inaccurate for
variable framerate mode.
Secondly, the timestamps always start from zero, while pts/dts can
start from nonzero. FLV demuxer rejects such index with message:
"Found invalid index entries, clearing the index".
Fixes memleaks when the trailer is never written or when shift_data()
fails when writing the trailer.
Reviewed-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
avpriv_mpeg4audio_sample_rates has a size of 64B and it is currently
avpriv; a clone of it exists in aacenctab.h and from there it is inlined
in aacenc.c (which also uses the avpriv version) and in the FLV muxer.
This means that despite it being avpriv both libavformat as well as
libavcodec have copies already.
This situation is clearly suboptimal. Given the overhead of exporting
symbols (for x64 Elf/Linux/GNU: 2x2B version, 2x24B .dynsym, 24B .rela.dyn,
8B .got, 4B hash + twice the size of the name (here 31B)) the object is
unavprived, i.e. duplicated into libavformat when creating a shared
build; but the duplicates in the AAC encoder and FLV muxer are removed.
This involves splitting of the sample rate table into a file of its own;
this allowed to break some spurious dependencies (e.g. both the AAC
encoder as well as the Matroska demuxer actually don't need the
mpeg4audio_get_config stuff).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
FLV AMF tags have a 24bit field for timestamps plus an 8bit for extended
timestamps.
All FLV AMF tags except when we write metadata handle this correctly
using the put_timestamp function.
Until now when writing metadata we were only using the first
24 bits and thus the timestamp value was wraping around 4 hours 40
minutes (16,800,000 ms, max 24 bit value 16,777,216) of playback.
This commit fixes this applying this same function put_timestamp
for the metadata FLV tag.
Signed-off-by: Marton Balint <cus@passwd.hu>
For most check_bitstream() functions this just avoids having
to dereference s->streams[pkt->stream_index] themselves; but for
meta-muxers it will allow to forward the packet to stream with
a different stream_index (belonging to a different AVFormatContext)
without using a spare packet.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible now that the next-API is gone.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
When shifting the already written data in order to write the keyframe
index, the flv muxer would first store the pre-shift size, then
calculate how big the index will be eventually, then perform some seeks
to update some size fields, then seek back to the end of the file to get
the new position, followed by a seek to the position where writing will
really start. Seeking back to the (already known) end position (that is
actually used to perform this seek) to get the end position is of course
unnecessary. It has been removed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Might happen for annex B H.264.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
While the function adding a new element to the keyframe index checked
the allocation, the caller didn't check the return value. This has been
changed. To do so, the return value has been changed to an ordinary ret
instead of pb->error. This doesn't pose a problem, as write_packet() in
mux.c already checks for write errors (since 9ad1e0c1).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
mythtv have problem with non-seekable dont write duration and filesize
and there have problem with some other server and player with 0 value
duation and filesize.
So add a flv flags to fix the ticket and make a choose for users.
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Add keyframe index metadata
Used to facilitate seeking; particularly for HTTP pseudo streaming.
1. read live streaming or file by sequence
2. if use add_keyframe_index option, add a mark flag at the position,
use to insert new context at the last step.
3. add the keyframes *offset* and *timestamp* into a list
4. if use add_keyframe_index option, shift the metadata data from
mark flag offset
5. insert the keyframes *offset* and *timestamp* from the list by
sequence
6. free the list
7. end.
Add FATE test case;
Reviewed-by: Lou Logan <lou@lrcd.com>
Signed-off-by: Steven Liu <liuqi@gosun.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Its impossible to update the filesize & duration values if seekback is not
possible as with live streams
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
when split flv file by flv format at first, and cat flvs file
into one flv file, the flv sequence end is be used,
then the whole flv have many flv sequence end TAG.
this flags can give user an option to ignore write sequence end TAG
Signed-off-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
add FLVFlags type, be used to add new FLVFlags options
Signed-off-by: Steven Liu <lingjiujianke@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Alessandro Ros
Anton Khirnov
Andreas Rheinhardt
Zhao Zhili
Timo Rothenpieler
Steven Liu
Marvin Scholz
Vittorio Giovara
Marton Balint
asilvestre
James Almer
Andreas Rheinhardt
Michael Niedermayer
Jun Zhao
Alex Converse
fuqiuping
Steven Liu