Fixes: division by 0
Fixes: 28597/clusterfuzz-testcase-minimized-ffmpeg_dem_VIVIDAS_fuzzer-5752201490333696
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Add 2 new options:
- reconnect_on_http_error - a list of http status codes that should be
retried. the list can contain explicit status codes / the strings
4xx/5xx.
- reconnect_on_network_error - reconnects on arbitrary errors during
connect, e.g. ECONNRESET/ETIMEDOUT
the retry employs the same exponential backoff logic as the existing
reconnect/reconnect_at_eof flags.
related tickets:
https://trac.ffmpeg.org/ticket/6066https://trac.ffmpeg.org/ticket/7768
Signed-off-by: Marton Balint <cus@passwd.hu>
This can be used to receive the raw mpegts stream from a SAT>IP
server, by letting avformat handle the RTSP/RTP/UDP negotiation
and setup, but then simply passing the MP2T stream through
instead of demuxing it further.
For example, this command would demux/remux the mpegts stream:
SATIP_URL='satip://192.168.1.99:554/?src=1&freq=12188&pol=h&ro=0.35&msys=dvbs&mtype=qpsk&plts=off&sr=27500&fec=34&pids=0,17,18,167,136,47,71'
ffmpeg -i $SATIP_URL -map 0 -c copy -f mpegts -y remux.ts
Whereas this command will simply write out the raw stream, with
the original PAT/PMT/PIDs intact:
ffmpeg -rtsp_flags satip_raw -i $SATIP_URL -map 0 -c copy -f data -y raw.ts
Signed-off-by: Aman Karmani <aman@tmm1.net>
Fixes: 1.21126e+111 is outside the range of representable values of type 'int'
Fixes: 27398/clusterfuzz-testcase-minimized-ffmpeg_dem_CAF_fuzzer-5412960339755008
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The earlier code would not complain if the remaining size was one byte
short of the desired size; and the way it performed the check could run
into signed integer overflow.
Fixes: signed integer overflow: 9223372036854775807 + 1 cannot be represented in type 'long'
Fixes: Timeout
Fixes: 26434/clusterfuzz-testcase-minimized-ffmpeg_dem_MV_fuzzer-5752845451919360
Fixes: 26444/clusterfuzz-testcase-minimized-ffmpeg_dem_BINK_fuzzer-4697773380993024
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
SMVJPEG stores frames as slices of a big JPEG image. The decoder is
implemented as a wrapper that instantiates a full internal MJPEG
decoder, then forwards the decoded frames with offset data pointers.
This is unnecessarily complex and fragile, not supporting useful decoder
capabilities like direct rendering.
Re-implement the decoder inside the MJPEG decoder, which is accomplished
by returning each decoded frame multiple times, setting cropping
information appropriately on each instance.
One peculiar aspect of the previous design is that since
- the smvjpeg decoder returns one frame per input packet
- there are multiple frames in each packets (the aformentioned slices)
the demuxer needs to return each packet multiple times.
This is now also eliminated - the demuxer now returns each packet
exactly once, with the duration set to the number of frames it decodes
to.
This also removes one of the last remaining internal uses of the old
video decoding API.
Factor out the code into a separate muxing-specific function.
Stop accessing the deprecated AVStream-embedded codec context, use the
average framerate (if specified) instead.
Fixes: out of memory access
Fixes: 27787/clusterfuzz-testcase-minimized-ffmpeg_dem_RPL_fuzzer-4743666463408128.fuzz
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array access
Fixes: 27424/clusterfuzz-testcase-minimized-ffmpeg_dem_VIVIDAS_fuzzer-5682070692823040
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Do this by converting big-endian side data to little endian for
checksumming.
Reviewed-by: Andriy Gelman <andriy.gelman@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Nothing guarantees that the size of side data containing a palette
is actually divisible by four (although it should be); but for
big-endian systems, an algorithm is used that presupposed this.
So switch to an algorithm that does not overread: It processes
four bytes at a time, but only if all of them are contained in
the side data.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
the init.mp4 can be expanded with strftime the same way as
hls_segment_filename.
Signed-off-by: Nikola Pajkovsky <nikola@pajkovsky.cz>
Signed-off-by: liuqi05 <liuqi05@kuaishou.com>
fix ticket: 8989
This is is due to the following behavior in the current code:
1. The initial_prog_date_time gets set to the current local time
2. The existing playlist (.m3u8) file gets parsed and the segments
present are added to the variant stream
3. The new segment is created and added
4. The existing segments and the new segment are written to the
playlist file. The initial_prog_date_time from point 1 is used
for calculating "#EXT-X-PROGRAM-DATE-TIME" for the segments,
which results in incorrect "#EXT-X-PROGRAM-DATE-TIME" values
for existing segments
The following approach fixes this bug:
1. Add a new variable "discont_program_date_time" of type double
to HLSSegment struct
2. Store the "EXT-X-PROGRAM-DATE-TIME" value from the existing
segments in this variable
3. When writing to playlist file if "discont_program_date_time"
is set, then use that value for "EXT-X-PROGRAM-DATE-TIME" else
use the value present in vs->initial_prog_date_time
Signed-off-by: Vignesh Ravichandran <vignesh.ravichandran02@gmail.com>
Signed-off-by: liuqi05 <liuqi05@kuaishou.com>
As this is a meta muxer and the same flag is set with the fifo
meta muxer, there is really no reason not to have this set here
as well.
Signed-off-by: Jan Ekström <jan.ekstrom@24i.com>
Fixes: signed integer overflow: 175 + 2147483571 cannot be represented in type 'int'
Fixes: 26833/clusterfuzz-testcase-minimized-ffmpeg_dem_IMAGE2_fuzzer-5969501214212096
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 46671062 * 100 cannot be represented in type 'int'
Fixes: 26826/clusterfuzz-testcase-minimized-ffmpeg_dem_REALTEXT_fuzzer-5644062910316544
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
By using the frame counter (and the video time base) for audio pts we lose some
timestamp precision but we ensure that video and audio coming from the same DV
frame are always in sync.
This patch also makes timestamps after seek consistent and it should also fix
the timestamps when the audio clock is unlocked and have a completely
indpendent clock source. (E.g. runs on fixed 48009 Hz which should have been
exact 48000 Hz)
Fixes out of sync timestamps in ticket #8762.
Signed-off-by: Marton Balint <cus@passwd.hu>
Andreas Rheinhardt
Michael Niedermayer
Jonathan Baudanza
erankor
Aman Karmani
Steven Liu
Carl Eugen Hoyos
Derek Buitenhuis
Andriy Gelman
Zhao Zhili
Anton Khirnov
Nikola Pajkovsky
Vignesh Ravichandran
Jan Ekström
Marton Balint
Peter Ross
Thierry Foucu
Limin Wang