The function is not used anywhere else and is causing mingw-w64 clang
builds to fail with
ffmpeg-git/libavdevice/decklink_dec.cpp:792:5: error: no previous prototype for function 'get_bmd_timecode' [-Werror,-Wmissing-prototypes]
int get_bmd_timecode(AVFormatContext *avctx, AVTimecode *tc, AVRational frame_rate, BMDTimecodeFormat tc_format, IDeckLinkVideoInputFrame *videoFrame)
Signed-off-by: Christopher Degawa <ccom@randomderp.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Currently skip_samples is set to start_pad if sample_time is lesser or
equal to 0. This can cause issues if the stream starts with packets that
have negative pts. Calling avformat_seek_file() with ts set to 0 on such
streams makes the mov demuxer return the right corresponding packets
(near the 0 timestamp) but set skip_samples to start_pad which is
incorrect as the audio decoder will discard the returned samples
according to skip_samples from the first packet it receives (which has
its timestamp near 0).
For example, considering the following audio stream with start_pad=1344:
[PKT pts=-1344] [PKT pts=-320] [PKT pts=704] [PKT pts=1728] [...]
Calling avformat_seek_file() with ts=0 makes the next call to
av_read_frame() return the packet with pts=-320 and a skip samples
side data set to 1344 (start_pad). This makes the audio decoder
incorrectly discard (1344 - 320) samples.
This commit makes the move demuxer adjust skip_samples according to the
stream start_pad, seek timestamp and first sample timestamp.
The above example will now result in av_read_frame() still returning the
packet with pts=-320 but with a skip samples side data set to 320
(src_pad - (seek_timestamp - first_timestamp)). This makes the audio
decoder only discard 320 samples (from pts=-320 to pts=0).
Signed-off-by: Marton Balint <cus@passwd.hu>
Runtime checks for whether the encoder is fixed-point or not are
unnecessary here as this is a template; furthermore, there is no
fixed-point EAC-3 encoder, so some checks for whether one is in EAC-3
mode can be omitted when doing fixed-point encoding.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
ff_eac3_exponent_init() set values twice when initializing a static
table; ergo the initialization code must not run concurrently with
a running EAC-3 encoder. Yet this code is executed every time an EAC-3
encoder is initialized. So use ff_thread_once() for this and also for a
similar initialization performed for all AC-3 encoders to make them all
init-threadsafe.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Fixes: left shift of negative value -25824
Fixes: 27754/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_XMA2_fuzzer-5760255962906624
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 9223372036854775807 + 32768 cannot be represented in type 'long'
Fixes: 27744/clusterfuzz-testcase-minimized-ffmpeg_dem_DHAV_fuzzer-5179319491756032
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Also do it for FFT_FLOAT only, as this is the only combination for which
it can be set.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The Opus header initial padding preskip amount is always to be expressed
relative to 48kHz. However, the encoder delay returned from querying
libopus is relative to the encoding samplerate. Multiply by the
samplerate conversion factor to correct.
Signed-off-by: Arthur Taylor <art@ified.ca>
Fixes: division by 0
Fixes: 28597/clusterfuzz-testcase-minimized-ffmpeg_dem_VIVIDAS_fuzzer-5752201490333696
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -210824 * 16384 cannot be represented in type 'int'
Fixes: 28670/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_ALS_fuzzer-5682310846480384
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This implements the function drop_obu() as defined in Setion 6.2.1 from the
spec.
In a reading only scenario, units that belong to an operating point the
caller doesn't want should not be parsed.
Signed-off-by: James Almer <jamrial@gmail.com>
The caller may not need all units in a fragment in reading only scenarios.
They could in fact alter global state stored in the private CodedBitstreamType
fields in an undesirable way.
With this change, unit decomposition can be skipped based on parsed values
within the unit.
Signed-off-by: James Almer <jamrial@gmail.com>
The standalone version of Kvazaar sets a default ratecontrol algorithm when
bitrate is set. Mirror this behaviour.
Signed-off-by: Joose Sainio <joose.sainio@tuni.fi>
Signed-off-by: Linjie Fu <linjie.justin.fu@gmail.com>
It's required by the 9.3.1 TableStatCoeff* section.
Following clips have this feature:
WPP_HIGH_TP_444_8BIT_RExt_Apple_2.bit
Bitdepth_A_RExt_Sony_1.bin
Bitdepth_B_RExt_Sony_1.bin
EXTPREC_HIGHTHROUGHPUT_444_16_INTRA_10BIT_RExt_Sony_1.bit
EXTPREC_HIGHTHROUGHPUT_444_16_INTRA_12BIT_RExt_Sony_1.bit
EXTPREC_HIGHTHROUGHPUT_444_16_INTRA_8BIT_RExt_Sony_1.bit
EXTPREC_MAIN_444_16_INTRA_10BIT_RExt_Sony_1.bit
EXTPREC_MAIN_444_16_INTRA_12BIT_RExt_Sony_1.bit
EXTPREC_MAIN_444_16_INTRA_8BIT_RExt_Sony_1.bit
WPP_AND_TILE_10Bit422Test_HIGH_TP_444_10BIT_RExt_Apple_2.bit
WPP_AND_TILE_AND_CABAC_BYPASS_ALIGN_0_HIGH_TP_444_14BIT_RExt_Apple_2.bit
WPP_AND_TILE_AND_CABAC_BYPASS_ALIGN_1_HIGH_TP_444_14BIT_RExt_Apple_2.bit
WPP_AND_TILE_HIGH_TP_444_8BIT_RExt_Apple_2.bit
you can download them from:
https://www.itu.int/wftp3/av-arch/jctvc-site/bitstream_exchange/draft_conformance/RExt/
Signed-off-by: Xu Guangxin <oddstone@gmail.com>
Signed-off-by: Linjie Fu <linjie.justin.fu@gmail.com>
Add 2 new options:
- reconnect_on_http_error - a list of http status codes that should be
retried. the list can contain explicit status codes / the strings
4xx/5xx.
- reconnect_on_network_error - reconnects on arbitrary errors during
connect, e.g. ECONNRESET/ETIMEDOUT
the retry employs the same exponential backoff logic as the existing
reconnect/reconnect_at_eof flags.
related tickets:
https://trac.ffmpeg.org/ticket/6066https://trac.ffmpeg.org/ticket/7768
Signed-off-by: Marton Balint <cus@passwd.hu>
Christopher Degawa
Matthieu Bouron
Lingjiang Fang
Timo Rothenpieler
Andreas Rheinhardt
Michael Niedermayer
Arthur Taylor
James Almer
Joose Sainio
Xu Guangxin
Paul B Mahol
Jonathan Baudanza
erankor
Jan Ekström