The field is not specific to Opus.
The mp2fixed encoder signals initial_padding and is used
by both the matroska-encoding-delay test as well as
the lavf-mkv tests which necessitated several FATE ref changes.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Matroska requires pts to be >= 0 with a slight exception:
It has a mechanism to deal with codec delay, i.e. with
the data added at the beginning that does not correspond
to actual input data and should be discarded by the player.
Only the audio actually intended to be output needs to have
a timestamp >= 0.
In order to avoid unnecessary timestamp shifting, this patch
allows muxers to inform the shifting code about this so that
it can take it into account.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Matroska generally requires timestamps to be nonnegative, but
there is an exception: Data that corresponds to encoder delay
and is not supposed to be output anyway can have a negative
timestamp. This is achieved by using the CodecDelay header
field: The demuxer has to subtract this value from the raw
(nonnegative) timestamps of the corresponding track.
Therefore the muxer has to add this value first to write
this raw timestamp.
Support for writing CodecDelay has been added in FFmpeg commit
d92b1b1bab and in Libav commit
a1aa37dd0b. The former simply
wrote the header field and did not apply any timestamp offsets,
leading to desynchronisation (if one uses multiple tracks).
The latter applied it at two places, but not at the one where
it actually matters, namely in mkv_write_block(), leading to
the same desynchronisation as with the former commit. It furthermore
used the wrong stream timebase to convert the delay to the
stream's timebase, as the conversion used the timebase from
before avpriv_set_pts_info().
When the latter was merged in 82e4f39883,
it was only done in a deactivated state that still did not
offset the timestamps when muxing due to "assertion failures
and av sync errors". a1aa37dd0b
made it definitely more likely to run into assertion failures
(namely if the relative block timestamp doesn't fit into an int16_t).
Yet all of the above issues have been fixed (in commits
962d631573,
5d3953a5dc and
4ebeab15b0. This commit therefore
enables applying CodecDelay, fixing ticket #7182.
There is just one slight regression from this: If one has input
with encoder delay where the first timestamp is negative, but
the pts of the part of the data that is actually intended to be
output is nonnegative, then the timestamps will currently by default
be shifted to make them nonnegative before they reach the muxer;
the muxer will then ensure that the shifted timestamps are retained.
Before this commit, the muxer did not ensure this; instead the
timestamps that the demuxer will output were shifted and
if the first timestamp of the actually intended output was zero
before shifting, then this unintentional shift just cancels
the shift performed before the packet reached the muxer.
(But notice that this only applies if all the tracks use the same
CodecDelay, or the relative sync between tracks will be impaired.)
This happens in the matroska-opus-remux and matroska-ogg-opus-remux
FATE tests. Future commits will forward the information that
the Matroska muxer has a limited capability to handle negative
timestamps so that the shifting in libavformat can take advantage
of it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Opus can be decoded to multiple samplerates (namely 48kHz, 24KHz,
16Khz, 12 KHz and 8Khz); libopus as well as our encoder wrapper
support these sample rates. The OpusHead contains a field for
this original samplerate. Yet the pre-skip (and the granule-position
in the Ogg-Opus mapping in general) are always in the 48KHz clock,
irrespective of the original sample rate.
Before commit c3c22bee63, our libopus
encoder was buggy: It did not account for the fact that the pre-skip
field is always according to a 48kHz clock and wrote a too small
value in case one uses the encoder with a sample rate other than 48kHz;
this discrepancy between CodecDelay and OpusHead led to Firefox
rejecting such streams.
In order to account for that, said commit made the muxer always use
48kHz instead of the actual sample rate to convert the initial_padding
(in samples in the stream's sample rate) to ns. This meant that both
fields are now off by the same factor, so Firefox was happy.
Then commit f4bdeddc3c fixed the issue
in libopusenc; so the OpusHead is correct, but the CodecDelay is
still off*. This commit fixes this by effectively reverting
c3c22bee63.
*: Firefox seems to no longer abort when CodecDelay and OpusHead
are off.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is possible for the trailing padding to be zero, namely
e.g. if the AV_PKT_DATA_SKIP_SAMPLES side data is used
for leading padding. Matroska supports this (use a negative
DiscardPadding), but players do not; at least Firefox refuses
to play such a file. So for now only write DiscardPadding
if it is trailing padding and nonzero.
The fate-matroska-ogg-opus-remux was affected by this.
(I wish CodecDelay would not exist and DiscardPadding would
be used to instead trim the codec delay away (with the Block
timestamp corresponding to the time at which the actually
output audio is output).)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Demuxers are not allowed to do this and few callers, if any, will handle
this correctly. Send the AV_SIDE_DATA_PARAM_CHANGE_SAMPLE_RATE side data
instead.
Demuxers are not supposed to update AVCodecParameters after the stream
was seen by the caller. This value is not important enough to support
dynamic updates for.
The mov demuxer only returns DV audio, video packets are discarded.
It first reads the data to be parsed into a packet. Then both this
packet and the pointer to its data are passed together to
avpriv_dv_produce_packet(), which parses the data and partially
overwrites the packet. This is confusing and potentially dangerous, so
just pass NULL and avoid pointless packet modification.
Initialized to 1:1, but if the script sets these properties, it
will be set to those instead (0:0 disables it, apparently).
Signed-off-by: Stephen Hutchinson <qyot27@gmail.com>
It makes no sense here, as flac_parse_block_header()
is not even supposed to advance the caller's pointer.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The HEVC code currently uses an array of arrays of NALUs; one such array
contains all the SPS NALUs, one all PPS NALUs etc. The array of arrays
is grown dynamically via av_reallocp_array(), but given that the latter
function automatically frees its buffer upon reallocation error,
it may only be used with PODs, which this case is not. Even worse:
While the pointer to the arrays is reset, the counter for the number
of arrays is not, leading to a segfault in hvcc_close().
Fix this by avoiding the allocations of the array of arrays altogether.
This is easily possible because their number is bounded (by five).
Furthermore, as a byproduct we can ensure that the code always
produces the recommended ordering of VPS-SPS-PPS-SEI (which was
not guaranteed before).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The threshold of 5 is arbitrary, both smaller and larger should work fine
Fixes: Stack overflow
Fixes: 50603/clusterfuzz-testcase-minimized-ffmpeg_dem_ASF_O_fuzzer-6049302564175872
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: ffmpeg.md
Fixes: Out of array access
Fixes: CVE-2022-2566
Found-by: Andy Nguyen <theflow@google.com>
Found-by: 3pvd <3pvd@google.com>
Reviewed-by: Andy Nguyen <theflow@google.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: -6322983228386819992 - 5557477266266529857 cannot be represented in type 'long'
Fixes: 50112/clusterfuzz-testcase-minimized-ffmpeg_dem_IFF_fuzzer-6329186221948928
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: Timeout
Fixes no testcase, this is the same idea as similar attacks against XML parsers
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Improves the test; also should fix Coverity issue #1512408.
Reviewed-by: Pierre-Anthony Lemieux <pal@sandflow.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes: signed integer overflow: -1948269928 * 10 cannot be represented in type 'int'
Fixes: 49451/clusterfuzz-testcase-minimized-ffmpeg_dem_SUBVIEWER_fuzzer-6344614822412288
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
According to its documentation it returns "pts of the last muxed packet
+ its duration", but the value it actually returns right now is
(possibly guessed) dts after muxer-internal bitstream filtering (if
any).
This function was added for ffmpeg.c, but it is not used there anymore.
Since the value it returns is ill-defined and so inappropriate for any
serious use, deprecate it.
Some muxers, such as GPAC, create files with only one sidx, but two streams
muxed into the same fragments pointed to by this sidx.
Prevously, in such a case, when we seeked in such files, we fell back
to, for example, using the sidx associated with the video stream, to
seek the audio stream, leaving the seekhead in the wrong place.
We can still do this, but we need to take care to compare timestamps
in the same time base.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
frag_stream_info->index_entry isn't the first sample/trun index.
cenc.frag_index_entry_base failed to catch the case since
current_index > 0.
Fix ticket #9807.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
frag_index.current is used by cenc_filter, and is updated inside
mov_read_moof. It can out of sync regarding to mov_read_packet.
Partly fix ticket #9807.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
A gateway can see everything, and we should not be shipping a hardcoded
default from a third party company; it's a security risk.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
The AviSynth C API requires using avs_release_video_frame
whenever avs_get_frame has been used, but the recent addition
of frameprop reading to the demuxer was missing this in
avisynth_create_stream_video.
Signed-off-by: Stephen Hutchinson <qyot27@gmail.com>
Stores the item ids of all the items found in the file and
processes the primary item at the end of the meta box. This patch
does not change any behavior. It sets up the code for parsing
alpha channel (and possibly images with 'grid') in follow up
patches.
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: James Zern <jzern@google.com>
The fLaC and dfLa box IDs have been registered with the MP4 RA
(they are now listed at https://mp4ra.org/#/codecs) and support
for muxing FLAC in MP4 has been experimental in ffmpeg for
6 years now, since Nov 21, 2016
This patch removes the experimental status and removes the MP4
object type, as none has been registered for FLAC as it was not
deemed necessary.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
In addition to .eac3, .ec3 is also commonly used by people to name raw
E-AC-3 streams. Enables automatic recognition of the eac3 format for
the .ac3 extension.
For instance Dolby Digital Plus software only support files with
.ec3. Files with .eac3 are not supported. Check issue #18 in the
public dlb_mp4base repository from DolbyLaboratories.
Signed-off-by: Ruben Gonzalez <rgonzalez@fluendo.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Andreas Rheinhardt
Anton Khirnov
Stephen Hutchinson
Michael Niedermayer
Carl Eugen Hoyos
Paul B Mahol
Wujian(Chin)
Derek Buitenhuis
Zhao Zhili
Timo Rothenpieler
Pierre-Anthony Lemieux
Vignesh Venkatasubramanian
Martijn van Beurden
Ruben Gonzalez