Unnecessary since acf63d5350adeae551d412db699f8ca03f7e76b9;
also avoids relocations.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is of no value to the user, because every muxer can always
be flushed with a NULL packet. As its documentation shows
("If not set, the muxer will not receive a NULL packet in
the write_packet function") it is actually an internal flag
that has been publically exposed because there was no internal
flags field for output formats for a long time. But now there is
and so use it by replacing the public flag with a private one.
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These defines are also used in other contexts than just AVCodecContext
ones, e.g. in libavformat. Furthermore, given that these defines are
public, the AV-prefix is the right one, so deprecate (and not just move)
the FF-macros.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Add the appropriate descriptors to the MPEG-TS demux and mux to
ensure that SMPTE 2038 VANC streams are properly preserved
when using codec copy (including adding the appropriate PMT
descriptors).
The focus of this patch is TS input to TS output. A separate
patch adds support for output of 2038 VANC over decklink SDI.
Thanks to Marton Balint for feedback to preserve ABI compatibility.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
The original code would strip off the PTS/DTS of any packets
which had a stream ID of STREAM_ID_PRIVATE_STREAM_1. While the
intent was to apply this to asynchronous KLV packets, it was
being applied to any codec that had that same stream ID (including
types such as SMPTE 2038).
Add a clause to the if() statement to ensure it only gets applied
if the codec actually is KLV.
Signed-off-by: Devin Heitmueller <dheitmueller@ltnglobal.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Current mpegtsenc code only inserts SPS/PPS from extradata before IDR frames if
AUD is also inserted.
Unfortunately some encoders may preface a key frame with an AUD, but no
SPS/PPS. In that case current code does not repeat the "extradata" and the
resulting HLS stream may become noncompliant and unjoinable.
Fix this by always inserting SPS/PPS and moving AUD to the beginning of the
packet if it is already present.
Fixes ticket #10148.
Signed-off-by: Marton Balint <cus@passwd.hu>
This commit does for AVOutputFormat what commit
20f9727018 did for AVCodec:
It adds a new type FFOutputFormat, moves all the internals
of AVOutputFormat to it and adds a now reduced AVOutputFormat
as first member.
This does not affect/improve extensibility of both public
or private fields for muxers (it is still a mess due to lavd).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Add PCR at keyframe can be undesirable when -pcr_period is
specified. Add an flag to disable this behavior.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
The general demuxing API uses parsers and decoders. Therefore
FFStream contains pointers to AVCodecContexts and
AVCodecParserContext and lavf/internal.h includes lavc/avcodec.h.
Yet actually only a few files files really use these; and it is best
when this number stays small. Therefore this commit uses opaque
structs in lavf/internal.h for these contexts and stops including
avcodec.h.
This also avoids including lavc/codec_desc.h implicitly. All other
headers are implicitly included as now (mostly through codec.h).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The packets muxers receive are not guaranteed to be writable,
so they must not be modified. Ergo only access the packet's data
via a const uint8_t*.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is by definition the appropriate place for it.
Remove all the now unnecessary libavcodec/internal.h inclusions;
also remove other unnecessary headers from the affected files.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For most check_bitstream() functions this just avoids having
to dereference s->streams[pkt->stream_index] themselves; but for
meta-muxers it will allow to forward the packet to stream with
a different stream_index (belonging to a different AVFormatContext)
without using a spare packet.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
From ETSI EN 300 472 V1.3.1 (2003-05) Specification for conveying ITU-R System
B Teletext in DVB bitstreams:
4.1 Transport Stream (TS) packet format
The standard TS packet syntax and semantics are followed, noting the following
constraint:
- adaptation_field_control only the values "01" and "10" are permitted.
Some set top boxes (Motorola, Arris, Zyxel) refuse non-conforming packets.
Signed-off-by: Alex Shumsky <alexthreed@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
Commit 6f36eb0da7 claim it fixes endless loop on
package generation if muxrate specified and copyts used. But actually it does
not work properly if -mpegts_copyts 1 is specified:
ffmpeg -y -copyts -i loewe.ts -c:v libx264 -x264opts nal-hrd=cbr:force-cfr=1 -b:v 3500k -minrate 3500k -maxrate 3500k -bufsize 1000k -c:a mp2 -f mpegts -mpegts_copyts 1 -muxrate 4500k -vframes 1000 test.ts
ffmpeg generate huge file until it reach zero-based pcr value equal to first dts.
Attached patch fixes it.
Reviewed-by: Limin Wang <lance.lmwang@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
GB/T 17975.1
Information technology-Generic coding of moving pictures and associated audio
information-Part 1:Systems
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
GB/T 17975.1
Information technology-Generic coding of moving pictures and associated audio
information-Part 1:Systems
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
Writes a general ARIB stream identifier descriptor, as well
as a data component descriptor which also includes a
pre-defined additional_arib_caption_info structure.
Signed-off-by: zheng qian <xqq@xqq.im>
With some minor changes by Marton Balint:
- removed trailing whitespace
- fixed network_descriptors_length
- fixed reserved_future_use flag in the start of the section
- removed unused program variable
- emit first NIT after PAT
- some other cosmetics
Signed-off-by: Ubaldo Porcheddu <ubaldo@eja.it>
Signed-off-by: Marton Balint <cus@passwd.hu>
According to the PES packet definition defined in Table 2-17 of ISO_IEC_13818-1
specification, some fields like PTS/DTS or pes_extension could only appears if
the stream_id meets the condition:
if (stream_id != 0xBC && // program_stream_map
stream_id != 0xBE && // padding_stream
stream_id != 0xBF && // private_stream_2
stream_id != 0xF0 && // ECM
stream_id != 0xF1 && // EMM
stream_id != 0xFF && // program_stream_directory
stream_id != 0xF2 && // DSMCC_stream
stream_id != 0xF8) // ITU-T Rec. H.222.1 type E stream
And the following stream_id types don't have fields like PTS/DTS:
else if ( stream_id == program_stream_map
|| stream_id == private_stream_2
|| stream_id == ECM
|| stream_id == EMM
|| stream_id == program_stream_directory
|| stream_id == DSMCC_stream
|| stream_id == ITU-T Rec. H.222.1 type E stream ) {
for (i = 0; i < PES_packet_length; i++) {
PES_packet_data_byte
}
}
Current implementation skipped the check of stream_id causing some kind of
streams like private_stream_2 to be incorrectly written with actually a
private_stream_1-like PES header with PTS/DTS field. For example, Japan DTV
transmits news and alerts through ARIB superimpose that utilizes
private_stream_2 still could not be remuxed correctly for now.
This patch set fixes the remuxing for private_stream_2 and
other stream_id types.
Signed-off-by: zheng qian <xqq@xqq.im>
Signed-off-by: Marton Balint <cus@passwd.hu>
This is possible now that the next-API is gone.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
now first_pts assume dts will start from zero, if it's not true(copyts is enable),
too many null packet will be inserted for cbr output.
Please test with below command, you'll get huge test.ts without the patch:
./ffmpeg -y -copyts -i ../fate-suite/mpegts/loewe.ts -c:v libx264 -x264opts \
nal-hrd=cbr:force-cfr=1 -b:v 3500k -minrate 3500k -maxrate 3500k -bufsize \
1000k -c:a mp2 -muxrate 4500k -vframes 1000 test.ts
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
This takes the used values from ISO/IEC 13818-1 Table 2-45 and adds
them to the mpegts.h header. No functional changes.
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Marton Balint <cus@passwd.hu>
Some DVB and ATSC captures are using the official MPEG2 registration
descriptor in addition to using the correct stream type and the
AC-3_audio_stream_descriptor/AC3_descriptor. So let's add it even if it is not
strictly needed for DVB/ATSC.
Reviewed-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
Thomas Siedel
Nuo Mi
Anton Khirnov
Andreas Rheinhardt
Devin Heitmueller
John Coiner
Zhao Zhili
Paul B Mahol
Alex Shumsky
Maksym Veremeyenko
Limin Wang
zheng qian
Ubaldo Porcheddu
Marton Balint
James Almer
Brad Hards