av_ts_make_time_string() used "%.6g" format, but this format was losing
precision even when the timestamp to be printed was not that large. For example
for 3 hours (10800) seconds, only 1 decimal digit was printed, which made this
format inaccurate when it was used in e.g. the silencedetect filter. Other
detection filters printing timestamps had similar issues. Also time base
parameter of the function was *AVRational instead of AVRational.
Resolve these problems by introducing a new function, av_ts_make_time_string2().
We change the used format to "%.*f", use a precision of 6, except when printing
values near 0, in which case we calculate the precision dynamically to aim for
a similar precision in normal form as with %.6g. No longer using scientific
representation can make parsing the timestamp easier for the users, we can
safely do this because the theoretical maximum of INT64_MAX*INT32_MAX still
fits into the string buffer in normal form.
We somewhat imitate %g by trimming ending zeroes and the potential decimal
point characters. In order not to trim "inf" as well, we assume that the
decimal point string does not contain the letter "f". Note that depending on
printf %f implementation, we might trim "infinity" to "inf".
Thanks for Allan Cady for bringing up this issue.
Signed-off-by: Marton Balint <cus@passwd.hu>
Common utility function that can be used by all codecs to select the
right (any valid) film grain parameter set. In particular, this is
useful for AFGS1, which has support for multiple parameters.
However, it also performs parameter validation for H274.
This is needed for AV1 film grain as well, when using AFGS1 streams.
Also add extra width/height and subsampling information, which AFGS1
cares about, as part of the same API bump. (And in principle, H274
should also expose this information, since it is needed downstream to
correctly adjust the chroma grain frequency to the subsampling ratio)
Deprecate the equivalent H274-exclusive fields. To avoid breaking ABI,
add the new fields after the union; but with enough of a paper trail to
hopefully re-order them on the next bump.
This will allow users to pass the Android ApplicationContext which is mandatory
to retrieve the ContentResolver responsible to resolve/open Android content URIS.
av_frame_side_data_get() has a const AVFrameSideData * const *sd
parameter; so calling it with an AVFramesSideData **sd like
AVCodecContext.decoded_side_data (or with a AVFramesSideData * const
*sd) is safe, but the conversion is not performed automatically
in C. All users of this function therefore resort to a cast.
This commit changes this: av_frame_side_data_get() is renamed
to av_frame_side_data_get_c(); furthermore, a static inline
wrapper for it name av_frame_side_data_get() is added
that accepts an AVFramesSideData * const * and converts this
to const AVFramesSideData * const * in a Wcast-qual safe way.
This also allows to remove the casts from the current users.
Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The allocators have been superseded by av_vdpau_bind_context().
The latter have only been added "to allow multiple forks to add
fields to the structure without breaking ABI" [1], but libav
is no more, so this is not needed any longer.
[1]: https://ffmpeg.org/pipermail/ffmpeg-devel/2013-August/146954.html
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Export each tile as its own stream, and the grid information as a Stream Group
of type TILE_GRID.
This also enables exporting other stream items like thumbnails, which may be
present in non tiled HEIF images too. For those, the primary stream will be
tagged with the default disposition.
Based on a patch by Swaraj Hota
Signed-off-by: James Almer <jamrial@gmail.com>
It used to be used with preallocated packet buffers with
the old encode API, but said API is no more and therefore
there is no reason for this to be public any more.
So deprecate it and use an internal replacement
for the encoders using it as an upper bound for the
size of their headers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The existing (and upcoming) available group types are meant to combine several
streams for presentation, with the result being treated as if it was a stream
itself.
For example, a file could export two stream groups of the same type with one of
them as the "default".
Signed-off-by: James Almer <jamrial@gmail.com>
This was accidentally removed in a prior revision of the series,
alongside the corresponding (separate) version bump. Instead coalesce it
into the follow-up commit's entry, since that's the lowest version
actually supporting the new fields.
Motivated by YUVJ removal. This change will allow full negotiation
between color ranges and matrices as needed. By default, all ranges and
matrices are marked as supported.
Because grayscale formats are currently handled very inconsistently (and
in particular, assumed as forced full-range by swscale), we exclude them
from negotiation altogether for the time being, to get this API merged.
After filter negotiation is available, we can relax the
grayscale-is-forced-jpeg restriction again, when it will be more
feasible to do so without breaking a million test cases.
Note that this commit updates one FATE test as a consequence of the
sanity fallback for non-YUV formats. In particular, the test case now
writes rgb24(pc, gbr/unspecified/unspecified) to the matroska file,
instead of rgb24(unspecified/unspecified/unspecified) as before.
There are already several places in the codebase that match desc->name
against "xyz", and many downstream clients replicate this behavior.
I have no idea why this is not just a flag.
Motivated by my desire to add yet another check for XYZ to the codebase,
and I'd rather not keep copy/pasting a string comparison hack.
Deprecate AVStream.side_data and its helpers in favor of the AVStream's
codecpar.coded_side_data.
This will considerably simplify the propagation of global side data to decoders
and from encoders. Instead of having to do it inside packets, it will be
available during init().
Global and frame specific side data will therefore be distinct.
Signed-off-by: James Almer <jamrial@gmail.com>
This will simplify the propagation of side data to decoders and from encoders.
Global side data will now reside in the AVCodecContext, thus be available
during init(), removing the need to propagate it inside packets.
Global and frame specific side data will therefore be distinct.
Signed-off-by: James Almer <jamrial@gmail.com>
Handling AVPacketSideData directly, which can used on structs other than
AVPacket.
This will be useful in the following commits.
Signed-off-by: James Almer <jamrial@gmail.com>
It is also used by AVCodecContext.
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is of no value to the user, because every muxer can always
be flushed with a NULL packet. As its documentation shows
("If not set, the muxer will not receive a NULL packet in
the write_packet function") it is actually an internal flag
that has been publically exposed because there was no internal
flags field for output formats for a long time. But now there is
and so use it by replacing the public flag with a private one.
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Michael Niedermayer
Marton Balint
Niklas Haas
Matthieu Bouron
Andreas Rheinhardt
Jan Ekström
Anton Khirnov
James Almer
Damiano Galassi
Wu Jianhua
Paul B Mahol
Roman Arzumanyan