In 7.4.3.20 of H.266 (V3), there are two similarly-named variables:
scalingMatrixDcPred and ScalingMatrixDcRec. The old code set
ScalingMatrixDcRec, rather than scalingMatrixDcPred, in the first two
branches of the conditions on scaling_list_copy_mode_flag[id] and
aps->scaling_list_pred_mode_flag[id]. This could lead to decode
mismatches in sequences with explicitly-signalled scaling lists.
Signed-off-by: Frank Plowman <post@frankplowman.com>
Share the checkasm_check_pixel macro from hevc_pel in checkasm.h,
to allow other tests to use the same. (To use it in other tests,
those tests need to have a similar setup for high bitdepth pixels,
with a local variable named "bit_depth".)
This simplifies the code for checking the output, and can print
the failing output (including a map of matching/mismatching
elements) if checkasm is run with the -v/--verbose option.
Signed-off-by: Martin Storsjö <martin@martin.st>
The PNGv3 Specification Draft [1] has changed the capitalization
of mDCV and cLLI chunks (formerly mDCv and cLLi). This patch updates
FFmpeg to work with the new chunk names while retaining decode-side
compatibility with files created using the old names.
[1]: https://w3c.github.io/png/
Signed-off-by: Leo Izen <leo.izen@gmail.com>
SMUSH ANIM files with subversion 2 provide additional fields for
framerate and samplerate, use them if available, otherwise
default to 12 fps which is the default for almost all ANIMv2
since 1995.
Fixes the too-fast playback of test files from LucasArts games
released 1995-1997. It was not noticed since Audio for
those isn't decoded by ffmpeg.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
instead of just resyncing and skipping a bunch of TS packets, leading to
a loss of frames.
Before this, a stray byte with the value of 0x47 in TP_extra_header
would throw off the detection of where TS packets start.
A typical file that could cause issues would look like this:
00000300: 238f 4780 4750 1110 0000 01e0 0000 84c0
^^ ^^
The first four bytes here are TP_extra_header and the actual TS packet
starts at offset 0x304
FFmpeg would try to read a packet at 0x300 but since nothing skips the
4 byte TP_extra_header, find that the first byte is not 0x47 and
immediately go into mpegts_resync, and incorrectly detect the stray 0x47
in the TP_extra_header at 0x302 as the new sync byte.
Fix this by correctly skipping the first 4 bytes if the source packet
is 192 bytes.
Signed-off-by: llyyr <llyyr.public@gmail.com>
Signed-off-by: Hendrik Leppkes <h.leppkes@gmail.com>
Commit 8542f9c4f1 changed replaygain peak
values to use 100k instead of UINT32_MAX as peak, with possibility of
overflow. af_ashowinfo was never updated to reflect this, so we update
it now.
Fixes: 8542f9c4f1
Signed-off-by: Kacper Michajłow <kasper93@gmail.com>
Fixes FATE on a variety of configurations due to accuracy problems in
floating point math. Most constants tested against here are not even
specified with 7 decimal digits.
Reviewed-by: Niklas Haas <git@haasn.dev>
Reduces memory consumption by ~4MB for 1080p video with a maximum delay
of 16 frames by packing various information related to MIP:
* intra_mip_flag, 1 bit
* intra_mip_transposed_flag, 1 bit
* intra_mip_mode, 4 bits
Into a single byte.
Co-authored-by: Nuo Mi <nuomi2021@gmail.com>
Signed-off-by: Frank Plowman <post@frankplowman.com>
There is an issue with the constants used in YUV to YUV range conversion,
where the upper bound is not respected when converting to mpeg range.
With this commit, the constants are calculated at runtime, depending on
the bit depth. This approach also allows us to more easily understand how
the constants are derived.
For bit depths <= 14, the number of fixed point bits has been set to 14
for all conversions, to simplify the code.
For bit depths > 14, the number of fixed points bits has been raised and
set to 18, to allow for the conversion to be accurate enough for the mpeg
range to be respected.
The convert functions now take the conversion constants (coeff and offset)
as function arguments.
For bit depths <= 14, coeff is unsigned 16-bit and offset is 32-bit.
For bit depths > 14, coeff is unsigned 32-bit and offset is 64-bit.
x86_64:
chrRangeFromJpeg8_1920_c: 2127.4 2125.0 (1.00x)
chrRangeFromJpeg16_1920_c: 2325.2 2127.2 (1.09x)
chrRangeToJpeg8_1920_c: 3166.9 3168.7 (1.00x)
chrRangeToJpeg16_1920_c: 2152.4 3164.8 (0.68x)
lumRangeFromJpeg8_1920_c: 1263.0 1302.5 (0.97x)
lumRangeFromJpeg16_1920_c: 1080.5 1299.2 (0.83x)
lumRangeToJpeg8_1920_c: 1886.8 2112.2 (0.89x)
lumRangeToJpeg16_1920_c: 1077.0 1906.5 (0.56x)
aarch64 A55:
chrRangeFromJpeg8_1920_c: 28835.2 28835.6 (1.00x)
chrRangeFromJpeg16_1920_c: 28839.8 32680.8 (0.88x)
chrRangeToJpeg8_1920_c: 23074.7 23075.4 (1.00x)
chrRangeToJpeg16_1920_c: 17318.9 24996.0 (0.69x)
lumRangeFromJpeg8_1920_c: 15389.7 15384.5 (1.00x)
lumRangeFromJpeg16_1920_c: 15388.2 17306.7 (0.89x)
lumRangeToJpeg8_1920_c: 19227.8 19226.6 (1.00x)
lumRangeToJpeg16_1920_c: 15387.0 21146.3 (0.73x)
aarch64 A76:
chrRangeFromJpeg8_1920_c: 6324.4 6268.1 (1.01x)
chrRangeFromJpeg16_1920_c: 6339.9 11521.5 (0.55x)
chrRangeToJpeg8_1920_c: 9656.0 9612.8 (1.00x)
chrRangeToJpeg16_1920_c: 6340.4 11651.8 (0.54x)
lumRangeFromJpeg8_1920_c: 4422.0 4420.8 (1.00x)
lumRangeFromJpeg16_1920_c: 4420.9 5762.0 (0.77x)
lumRangeToJpeg8_1920_c: 5949.1 5977.5 (1.00x)
lumRangeToJpeg16_1920_c: 4446.8 5946.2 (0.75x)
NOTE: all simd optimizations for range_convert have been disabled.
they will be re-enabled when they are fixed for each architecture.
NOTE2: the same issue still exists in rgb2yuv conversions, which is not
addressed in this commit.
The existing av_csp_trc_func_from_id() mostly implements the OETF, except for
PQ. As such, we are currently missing a precise definition of an ITU-R EOTF.
Introduce the new functions av_csp_itu_eotf() and av_csp_itu_eotf_inv(), to fill
this void. Note that this is not possible in all cases, e.g. AVCOL_TRC_LOG which
has no corresponding EOTF definition in any ITU-R standard.
Note that we cannot implement the proper HLG and SMPTE 428 OOTFs without access
to all three color channels, because they are not independent per channel. As a
result, we need to define them on double[3] instead of double (*func)(double).
This explanation was inaccurate and highly misleading. The new wording is taken
more or less directly from ITU-T H.273, and also matches my understanding of
these functions.
The basic problem here is that the rgb*ToUV_half_* functions hard-code a
bilinear downsample from src[i] + src[i+1], with no bounds check on the i+1
access.
Due to the signature of the function, we cannot easily plumb the "true" width
into the function body to perform a bounds check. Similarly, we cannot easily
pre-pad the input because it is typically reading from the (const) input
frame, which would require a full memcpy to pad. Either of these solutions are
more trouble than the feature is worth, so just disable it on odd input sizes.
Fixes: use of uninitialized value
Fixes: ticket #11265
Signed-off-by: Niklas Haas <git@haasn.dev>
Sponsored-by: Sovereign Tech Fund
WASI mssing signal and siglongjmp support. This patch workaround
build error and add simd128 flag. Please note that many tests use
large array on stack, so you need to increase the stack size when
build checkasm, e.g., --extra-ldflags='-Wl,-z,stack-size=10485760'
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
And add wasm simd128 flag, so we can add simd128 optimizations.
It can be enabled by put -msimd128 to extra cflags. There is
no runtime detection on simd128 support yet. I think that needs to
be done with JavaScript.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
Fixes: 70991/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_WEBP_fuzzer-5544067620995072
Fixes: use of uninintailized value
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: Use of uninitialized value
Fixes: 71350/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_ILBC_fuzzer-6322020827070464
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The rv60_qp_to_idx table only supports qp up to 31 on intra
Fixes: global-buffer-overflow
Fixes: 377543818/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_RV60_fuzzer-5160167345291264
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Reviewed-by: Peter Ross <pross@xvid.org>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Note ISO/IEC 13818-1 defines an Extension_descriptor with descriptor_tag value
0x3f (63), so I kept the DVB comment.
I don't know what defines stream_type value 0x8a as DTS.
I don't have any Blu-ray standards so I don't know where those stream_type
values are defined.
Signed-off-by: Marton Balint <cus@passwd.hu>
H.266 (V3) section 7.4.12.8: "The value of lMvd[ compIdx ] shall be in
the range of −2^{17} to 2^{17} − 1, inclusive."
Signed-off-by: Frank Plowman <post@frankplowman.com>
Per H.266 (V3) section 7.4.3.19, LmcsMaxBinIdx is set equal to
15 - lmcs_delta_max_bin_idx. The previous code instead had it equal to
15 - lmcs_min_bin_idx. This could cause decoder mismatches.
Signed-off-by: Frank Plowman <post@frankplowman.com>
sunyuechi
Zhao Zhili
Frank Plowman
Martin Storsjö
Leo Izen
Manuel Lauss
Marth64
James Almer
llyyr
Osamu Watanabe
Paul B Mahol
Kacper Michajłow
Hendrik Leppkes
Gyan Doshi
Ramiro Polla
Malek Assaad
Niklas Haas
Michael Niedermayer
Scott Theisen