AVOutputFormat has default codecs for audio, video and subtitle
and often these are the only codecs of this type allowed.
So add a flag to AVOutputFormat so that this can be checked generically.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
More exactly: Not more than one stream of each type for which
a default codec (i.e. AVOutputFormat.(audio|video|subtitle)_codec)
is set; for those types for which no such codec is set (or for
which no designated default codec in AVOutputFormat exists at all)
no streams are permitted.
Given that with this flag set the default codecs become more important,
they are now set explicitly to AV_CODEC_ID_NONE for "unset";
the earlier code relied on AV_CODEC_ID_NONE being equal to zero,
so that default static initialization set it accordingly;
but this is not how one is supposed to use an enum.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Previously, we produced output with either \r\n or mixed line endings.
This was undesirable unto itself, but also made working with patches affecting
FATE output particularly challenging, especially via the mailing list.
Everything that consumes the SSA/ASS format is line-ending-agnostic,
so \n is selected to simplify git/ML usage in FATE.
Extra \r characters at the end of a packet are dropped. These are always
ignored by the renderer anyway.
Unnecessary since acf63d5350adeae551d412db699f8ca03f7e76b9;
also avoids relocations.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Incrementing a NULL pointer is undefined behaviour,
yet this is what would happen in case trailer were NULL
before the check.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When writing a subtitle SSA/ASS subtitle file, the AVCodecParameters::extradata
buffer is written directly to the output. In the case where the buffer is
filled from a matroska source file produced by some older versions of
Handbrake, this buffer ends with a null terminating character, which is then
erroneously copied into the middle of the output file. The change here avoids
this problem by treating it as a string rather than a raw buffer. This way it
is agnostic as to whether the source buffer was null terminated or not.
Fixes ticket #10203.
Reported-by: Tim Angus <tim at ngus.net>
Signed-off-by: Marton Balint <cus@passwd.hu>
This commit does for AVOutputFormat what commit
20f9727018 did for AVCodec:
It adds a new type FFOutputFormat, moves all the internals
of AVOutputFormat to it and adds a now reduced AVOutputFormat
as first member.
This does not affect/improve extensibility of both public
or private fields for muxers (it is still a mess due to lavd).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This is possible now that the next-API is gone.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: James Almer <jamrial@gmail.com>
To make it consistent with other muxers.
The user can still control the generic flushing behaviour after write_header
(same way as after packets) using the -flush_packets option, the default
typically means to flush unless a non-streamed file output is used.
Therefore this change should have no adverse effect on streaming, even if it is
assumed that the first packet has a clean buffer, so small seekbacks within the
output buffer work even when the IO context is not seekable.
Signed-off-by: Marton Balint <cus@passwd.hu>
Currently, AVStream contains an embedded AVCodecContext instance, which
is used by demuxers to export stream parameters to the caller and by
muxers to receive stream parameters from the caller. It is also used
internally as the codec context that is passed to parsers.
In addition, it is also widely used by the callers as the decoding (when
demuxer) or encoding (when muxing) context, though this has been
officially discouraged since Libav 11.
There are multiple important problems with this approach:
- the fields in AVCodecContext are in general one of
* stream parameters
* codec options
* codec state
However, it's not clear which ones are which. It is consequently
unclear which fields are a demuxer allowed to set or a muxer allowed to
read. This leads to erratic behaviour depending on whether decoding or
encoding is being performed or not (and whether it uses the AVStream
embedded codec context).
- various synchronization issues arising from the fact that the same
context is used by several different APIs (muxers/demuxers,
parsers, bitstream filters and encoders/decoders) simultaneously, with
there being no clear rules for who can modify what and the different
processes being typically delayed with respect to each other.
- avformat_find_stream_info() making it necessary to support opening
and closing a single codec context multiple times, thus
complicating the semantics of freeing various allocated objects in the
codec context.
Those problems are resolved by replacing the AVStream embedded codec
context with a newly added AVCodecParameters instance, which stores only
the stream parameters exported by the demuxers or read by the muxers.
Before this commit, the code was muxing up to the 2nd line after
"[Events]" (assuming it to be the "Format:" line). The remaining are
generally "Comment:" directives which can stay in that place. mkvextract
behaves that way so it seems there is no reason for that extra
complexity.
Since 596e5d4783, this is not necessary anymore. It also allows to
actually disable the flushing, improving write performance (but
possibly giving worse latency in real-time streaming).
Signed-off-by: Martin Storsjö <martin@martin.st>
Currently, we have a AV_CODEC_ID_SSA, which matches the way the ASS/SSA
markup is muxed in a standalone .ass/.ssa file. This means the AVPacket
data starts with a "Dialogue:" string, followed by a timing information
(start and end of the event as string) and a trailing CRLF after each
line. One packet can contain several lines. We'll refer to this layout
as "SSA" or "SSA lines".
In matroska, this markup is not stored as such: it has no "Dialogue:"
prefix, it contains a ReadOrder field, the timing information is not in
the payload, and it doesn't contain the trailing CRLF. See [1] for more
info. We'll refer to this layout as "ASS".
Since we have only one common codec for both formats, the matroska
demuxer is constructing an AVPacket following the "SSA lines" format.
This causes several problems, so it was decided to change this into
clean ASS packets.
Some insight about what is changed or unchanged in this commit:
CODECS
------
- the decoding process still writes "SSA lines" markup inside the ass
fields of the subtitles rectangles (sub->rects[n]->ass), which is
still the current common way of representing decoded subtitles
markup. It is meant to change later.
- new ASS codec id: AV_CODEC_ID_ASS (which is different from the
legacy AV_CODEC_ID_SSA)
- lavc/assdec: the "ass" decoder is renamed into "ssa" (instead of
"ass") for consistency with the codec id and allows to add a real
ass decoder. This ass decoder receives clean ASS lines (so it starts
with a ReadOrder, is followed by the Layer, etc). We make sure this
is decoded properly in a new ass-line rectangle of the decoded
subtitles (the ssa decoder OTOH is doing a simple straightforward
copy). Using the packet timing instead of data string makes sure the
ass-line now contains the appropriate timing.
- lavc/assenc: just like the ass decoder, the "ssa" encoder is renamed
into "ssa" (instead of "ass") for consistency with the codec id, and
allows to add a real "ass" encoder.
One important thing about this encoder is that it only supports one
ass rectangle: we could have put several dialogue events in the
AVPacket (separated by a \0 for instance) but this would have cause
trouble for the muxer which needs not only the start time, but also
the duration: typically, you have merged events with the same start
time (stored in the AVPacket->pts) but a different duration. At the
moment, only the matroska do the merge with the SSA-line codec.
We will need to make sure all the decoders in the future can't add
more than one rectangle (and only one Dialogue line in it
obviously).
FORMATS
-------
- lavf/assenc: the .ass/.ssa muxer can take both SSA and ASS packets.
In the case of ASS packets as input, it adds the timing based on the
AVPacket pts and duration, and mux it with "Dialogue:", trailing
CRLF, etc.
- lavf/assdec: unchanged; it currently still only outputs SSA-lines
packets.
- lavf/mkv: the demuxer can now output ASS packets without the need of
any "SSA-lines" reconstruction hack. It will become the default at
next libavformat bump, and the SSA support will be dropped from the
demuxer. The muxer can take ASS packets since it's muxed normally,
and still supports the old SSA packets. All the SSA support and
hacks in Matroska code will be dropped at next lavf bump.
[1]: http://www.matroska.org/technical/specs/subtitles/ssa.html
This is consistent with stdio and is what we want to do in all cases.
Fixes a bug in the voc muxer which didn't flush in write_trailer()
previously. This is the cause of the change in the test results.
In the name of consistency:
put_byte -> avio_w8
put_<type> -> avio_w<type>
put_buffer -> avio_write
put_nbyte will be made private
put_tag will be merged with avio_put_str
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
(cherry picked from commit 77eb5504d3)
In the name of consistency:
put_byte -> avio_w8
put_<type> -> avio_w<type>
put_buffer -> avio_write
put_nbyte will be made private
put_tag will be merged with avio_put_str
Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
This also lists the objects from those two libraries as internal (by adding
the ff_ prefix) so that they can then be hidden via linker scripts.
(cherry picked from commit c6610a216e)
Andreas Rheinhardt
rcombs
Anton Khirnov
Marton Balint
Clément Bœsch
Clément Bœsch
Rodger Combs
Michael Niedermayer
Clément Bœsch
Diego Biurrun
Mans Rullgard
Diego Elio Pettenò
Aurelien Jacobs