This option allows to add a prefix to the segment list entry filenames.
Also set by default the list entry filenames to the corresponding
segment basename, consistent with the HLS muxer.
Based on an idea by Steven Liu <lingjiujianke@gmail.com>.
avconv abuses the API by accessing AVStream.parser (which is private).
Removing AVStream.reference_dts in
2ba68dd044 breaks ABI compatibility for an
old avconv using a newer lavf. Fix this by adding a dummy field until
the next bump.
F4V is Adobe's mp4/iso media variant, with the most significant
addition/change being supporting other flash codecs than just
aac/h264.
Signed-off-by: Martin Storsjö <martin@martin.st>
Define positive return values as non errors and leave further meaning undefined
This allows future extensions to use these values
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Inspired by a patch by Jakob van Bethlehem. But instead of doing
an empty POST first to trigger the WWW-Authenticate header (which
would succeed if no auth actually was required), add an Expect:
100-continue header, which is meant to be used exactly for
cases like this.
The header is added if doing a post, and the user has specified
authentication but we don't know the auth method yet.
Not all common HTTP servers support the Expect: 100-continue header,
though, so we only try to use it when it really is needed. The user
can request it to be added for other POST requests as well via
an option - which would allow the caller to know immediately that
the POST has failed (e.g. if no auth was provided but the server
required it, or if the target URL simply doesn't exist).
This is only done for write mode posts (e.g. posts without pre-set
post_data) - for posts with pre-set data, we can just redo the post
if it failed due to 401.
Signed-off-by: Martin Storsjö <martin@martin.st>
The default is to autodetect the auth method. This does require one
extra request (and also closing and reopening the http connection).
For some cases such as HTTP POST, the autodetection is not handled
properly (yet).
No option is added for digest, since this method requires getting
nonce parameters from the server first and can't be used straight
away like Basic.
Signed-off-by: Martin Storsjö <martin@martin.st>
previously only codec_ids could be forced, which did not allow
forcing a specific implementation like libopenjpeg vs jpeg2000.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Also add options for specifying a certificate and key, which can
be used both when operating as client and as server.
Partially based on a patch by Peter Ross.
Signed-off-by: Martin Storsjö <martin@martin.st>
A file containing the trusted CA certificates needs to be
supplied via the ca_file AVOption, unless the TLS library
has got a system default file/database set up.
This doesn't check the hostname of the peer certificate with
openssl, which requires a non-trivial piece of code for
manually matching the desired hostname to the string provided
by the certificate, not provided as a library function.
That is, with openssl, this only validates that the received
certificate is signed with the right CA, but not that it is
the actual server we think we're talking to.
Verification is still disabled by default since we can't count
on a proper CA database existing at all times.
Signed-off-by: Martin Storsjö <martin@martin.st>
ASF markers only have a start time, so we lose the chapter end times,
but that is ASF for you
Signed-off-by: Vladimir Pantelic <vladoman@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This makes the output fragments independent of their position in
the output stream, making the output work better when streamed.
QuickTime Player doesn't support fragmented mp4 without the base
data offset, though.
Signed-off-by: Martin Storsjö <martin@martin.st>
This is enabled by default and can be disabled with
"-fflags -flush_packets".
Inspired by a patch from Nicolas George <nicolas.george@normalesup.org>.
Signed-off-by: Martin Storsjö <martin@martin.st>
In order to represent the codec delay accurately in Matroska, a
new element CodecDelay has been introduced. It contains the
overall delay added by the codec in nanoseconds. This patch adds
support for muxing CodecDelay value in the container.
Matroska spec for CodecDelay element can be found here:
http://matroska.org/technical/specs/index.html#CodecDelay
Signed-off-by: Vignesh Venkatasubramanian <vigneshv@google.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Allow emitting the current cluster that is being written before
starting a new one, simplifying how to figure out where clusters
are positioned in the output stream (for live streaming).
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Changes since v1 of the patch:
- enable option by default
- add documentation
- move up PTS override code after PES header parsing, to ensure we use the
last PCR before the first packet of the teletext PES packet.
The option overrides teletext packet PTS and DTS values with the timestamps
calculated from the PCR of the first program which the teletext stream is part
of and is not discarded.
Using the same teletext PID for multiple programs is possible, therefore we
need some kind of heuristics to know which program PCR we should synchronize
to. Using the first non-discarded PCR pid among the programs of the teletext
stream seemed like a good choice.
The patch does not do PCR interpolation to estimate the PCR of the teltetext
packet, it just uses the last PCR of the program, which may cause a slight
error (0.1 sec) in the teletext packet pts-es.
Based on a patch by Reimar Döffinger.
http://lists.ffmpeg.org/pipermail/ffmpeg-devel/2012-September/131610.html
Signed-off-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
avconv uses private and internal fields from libavformat, we thus must
match the layout even of the fields marked non public.
Otherwise ffmpegs libavformat could not be used as a dropin replacement
on debian/ubuntu
The current soname of libavformat was not part of any release nor are any
fields marked public moved thus in theory
no installed shared lib ABI breakage should occur. Still the need for this
change is unfortunate and chilling.
If you installed shared libs from a recent development version of libavformat
that is more recent than the last release. You probably want to check or rebuild
applications that linked to it.
minor versions of avformat & avdevice are bumped to allow detecting this
as both use the updated struct
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
The toc is inexact and not using it can thus make sense.
Using it is faster though, thus the opposite can similarly makes sense
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Allow applications to request reading streamcast metadata. This uses
AVOptions as API, and requires the application to explicitly request
and read metadata. Metadata can be updated mid-stream; if an
application is interested in that, it has to poll for the data by
reading the "icy_metadata_packet" option in regular intervals.
There doesn't seem to be a nice way to transfer the metadata in a nicer
way. Converting the metadata to ID3v2 tags might be a nice idea, but
the libavformat mp3 demuxer doesn't seem to read these tags mid-stream,
and even then we couldn't guarantee that tags are not inserted in the
middle of mp3 packet data.
This commit provides the minimum to enable applications to retrieve
this information at all.
Signed-off-by: Stefano Sabatini <stefasab@gmail.com>
There are 4 separate WebVTT text track kinds: subtitles (the default
if not otherwise specified), captions, descriptions, and metadata.
The WebM muxer needs to know which WebVTT text track kind this is, in
order to synthesize the correct track type and codec id.
To allow a demuxer to indicate the text track kind of the input, a new
set of AV_DISPOSITION flag values has been added, corresponding to
each of the non-default text track kind values.
Adding an arbitrary amount of padding bytes at the end of the
ID3 metadata fixes cover art display for some software (iTunes,
Traktor, Serato, Torq).
For reference (ID3 metadata):
[ Apic frames ] -> cover doesn't show up
[ Apic frames, Padding ] -> ok
[ Apic frames, ID3 frames ] -> ok
[ ID3 frames, Apic frames ] -> cover doesn't show up
[ ID3 frames, Apic frames, Padding ] -> ok
Carl Eugen Hoyos
Stefano Sabatini
Martin Storsjö
Mickaël Raulet
Yusuke Nakamura
Dirk Farin
David Kment
Anton Khirnov
Clément Bœsch
Michael Niedermayer
Nicolas George
James Almer
Vladimir Pantelic
Luca Barbato
Paul B Mahol
Vignesh Venkatasubramanian
Clément Bœsch
Alexis Ballier
Marton Balint
Andrey Utkin
Gavriloaie Eugen-Andrei
wm4
Matthew Heaney
Matthieu Bouron