It's completely absurd that libavcodec would care about libavformat
locking, but it was there because the lock manager was in libavcodec.
This is more stright forward. Changes ABI, but we don't require ABI
compatibility currently.
A number of new pix_fmts* have been added to AviSynth+:
16-bit packed RGB and RGBA
10-, 12-, 14, and 16-bit YUV 4:2:0, 4:2:2, and 4:4:4
8-, 10-, 12-, 14-, and 16-bit Planar RGB
8-, 10-, 12-, 14-, and 16-bit Planar YUVA and Planar RGBA
10-, 12-, 14-, and 16-bit GRAY variants
32-bit floating point Planar YUV(A), Planar RGB(A), and GRAY
*some of which are not currently available pix_fmts here and were
not added to the demuxer due to this
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Stream timebase should be set using avpriv_set_pts_info, otherwise
avctx->pkt_timebase is not correct, leading to A/V desync.
Signed-off-by: Marton Balint <cus@passwd.hu>
Reviewed-by: Stephen Hutchinson <qyot27@gmail.com>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
A number of new pix_fmts have been added to AviSynth+:
16-bit packed RGB and RGBA
10-, 12-, 14, and 16-bit YUV 4:2:0, 4:2:2, and 4:4:4
8-, 10-, 12-, 14-, and 16-bit Planar RGB
8-, 10-, 12-, 14-, and 16-bit Planar YUVA and Planar RGBA*
10-, 12-, 14-, and 16-bit GRAY variants*
32-bit floating point Planar YUV(A), Planar RGB(A), and GRAY*
*some of which are not currently available pix_fmts here and were
not added to the demuxer due to this
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The values don't need to be hardcoded since the correct values are
returned by avs_bits_per_pixel.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Currently, AVStream contains an embedded AVCodecContext instance, which
is used by demuxers to export stream parameters to the caller and by
muxers to receive stream parameters from the caller. It is also used
internally as the codec context that is passed to parsers.
In addition, it is also widely used by the callers as the decoding (when
demuxer) or encoding (when muxing) context, though this has been
officially discouraged since Libav 11.
There are multiple important problems with this approach:
- the fields in AVCodecContext are in general one of
* stream parameters
* codec options
* codec state
However, it's not clear which ones are which. It is consequently
unclear which fields are a demuxer allowed to set or a muxer allowed to
read. This leads to erratic behaviour depending on whether decoding or
encoding is being performed or not (and whether it uses the AVStream
embedded codec context).
- various synchronization issues arising from the fact that the same
context is used by several different APIs (muxers/demuxers,
parsers, bitstream filters and encoders/decoders) simultaneously, with
there being no clear rules for who can modify what and the different
processes being typically delayed with respect to each other.
- avformat_find_stream_info() making it necessary to support opening
and closing a single codec context multiple times, thus
complicating the semantics of freeing various allocated objects in the
codec context.
Those problems are resolved by replacing the AVStream embedded codec
context with a newly added AVCodecParameters instance, which stores only
the stream parameters exported by the demuxers or read by the muxers.
Stream timebase should be set using avpriv_set_pts_info, otherwise
avctx->pkt_timebase is not correct.
This should fix ticket #4766.
Patch is only compile tested.
Signed-off-by: Marton Balint <cus@passwd.hu>
Reviewed-by: Stephen Hutchinson <qyot27@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
In order to safely exit when the user tries to use AviSynth 2.5, the
continue_on_fail value for 2.6's functions need to be set to 1.
Otherwise, the library loader fails before the 'upgrade to 2.6'
log message appears.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
The AVSC_API changes in the new headers mean that the 2.6 alphas
are just as incompatible as 2.5 is.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
In order to safely exit when the user tries to use AviSynth 2.5,
the continue_on_fail value for 2.6's functions need to be set to
1. Otherwise, the library loader fails before the 'upgrade to
2.6' log message appears.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
If the user attempts to use AviSynth 2.5, an error message will
now tell them they need to upgrade.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
AviSynth 2.6 (and by extension, AviSynth+) moves these functions
into AVSC_API. This requires both adjusting their normal use,
and for AvxSynth, adjusting the position/use of the USING_AVISYNTH
ifdefs.
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Reviewed-by: Stephen Hutchinson <qyot27@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
If the audio changes from 9eac7c4 were merged as they were, this
would cause scripts with both video+audio to fail with a lot of
audio decoding errors (the video would be fine). Scripts with
only one of either video or audio were unaffected. Additionally,
the av_packet changes in general caused seeking to break.
Using av_packet_from_data allows video+audio scripts to work as
expected, without audio decoding errors. It also fixes seeking.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
These are the remaining av_packet-related bits from 9eac7c4
that didn't get merged at that time.
Changes authored by Anton Khirnov <anton@khirnov.net>, split out
from 9eac7c4 by Stephen Hutchinson <qyot27@gmail.com>
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Directly loads AviSynth through LoadLibrary instead of relying on
Video for Windows, and supports using AvxSynth (via dlopen) to
open scripts on Linux and OS X.
Error messages from AviSynth/AvxSynth are now reported through
av_log and exit, rather than the traditional behavior of generating
an error video that the user would need to watch to diagnose.
The main rewrite was authored by d s <avxsynth.testing@gmail.com>
from the AvxSynth team, with additional contributions by
Oka Motofumi <chikuzen.mo@gmail.com>
Stephen Hutchinson <qyot27@gmail.com>
Diego Biurrun <diego@biurrun.de>
Anton Khirnov <anton@khirnov.net>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Uses the 2.5 compatibility header included with the variant of
FFMS2 that uses AviSynth's C-interface. A copy of this header is
now provided in compat/avisynth.
avs_get_row_size_p and avs_get_height_p changed between versions
2.5 and 2.6. Since the avisynth_c.h header that avformat uses
assumes AviSynth 2.6, it would cause 2.5 to crash if given any
kind of real video (the Version() function was known to work,
though).
AvxSynth was unaffected by this issue because, despite being based
on AviSynth 2.5.8 and using 2.5.8's interface version number of 3,
it actually uses 2.6's versions of these functions.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
'Fixes' ticket #2526 insofar as it stops 2.5.8 from crashing and
tells the user to upgrade to 2.6 if they want to make video input
work. A real solution to #2526 would be to get video input from
2.5.8 to work right.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
wm4
Diego Biurrun
Stephen Hutchinson
Marton Balint
Matt Oliver
Vittorio Giovara
Anton Khirnov
Martin Storsjö
Hendrik Leppkes
Michael Niedermayer
d s
Clément Bœsch