From x86inc:
> On AMD cpus <=K10, an ordinary ret is slow if it immediately follows either
> a branch or a branch target. So switch to a 2-byte form of ret in that case.
> We can automatically detect "follows a branch", but not a branch target.
> (SSSE3 is a sufficient condition to know that your cpu doesn't have this problem.)
x86inc can automatically determine whether to use REP_RET rather than
REP in most of these cases, so impact is minimal. Additionally, a few
REP_RETs were used unnecessary, despite the return being nowhere near a
branch.
The only CPUs affected were AMD K10s, made between 2007 and 2011, 16
years ago and 12 years ago, respectively.
In the future, everyone involved with x86inc should consider dropping
REP_RETs altogether.
Currently, it is done once per slice-thread, leading to
one warning per slice-thread in case a YUVJ pixel format
has been originally used.
This also fixes the anomaly that said parameter are only
updated for the user-facing context (whose values are retrievable
via av_opt_get()) if slice-threading is not in use.
Fixes ticket #9860.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Initializing slice threads currently uses the function
(sws_init_context()) that is also used for initializing
user-facing contexts with the only difference being that
nb_threads is set to one before initializing the slice contexts.
Yet sws_init_context() also initializes lots of stuff
that is not slice-dependent, i.e. (src|dst)Range. This
currently only works because the code sets these fields
to the same values for all slice contexts. This is not
nice; even worse, it entails that log messages are printed
once per slice context (and therefore fill the screen).
This commit lays the groundwork to fix this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Same principle as previous commit, with sufficiently huge rgb2yuv table
values this produces wrong results and undefined behavior.
The unsigned produces the same incorrect results. That is probably
ok as these cases with huge values seem not to occur in any real
use case.
Fixes: signed integer overflow
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Large rgb2yuv tables and high pixel values cause the intermediate
int32_t of ru*r + gu*g + bu*b to exceed INT_MAX, which is undefined
behavior. This causes libswscale built with LLVM -fsanitize=undefined to
assert. Using unsigned integers instead has defined behavior and
produces identical results, and makes rgb64ToUV_c_template match
rgb64ToY_c_template.
Fixes: signed integer overflow
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Provide arm64 neon optimized implementations for hscale16To19 with
filter sizes 4, 8 and X4.
The tests and benchmarks run on AWS Graviton 2 instances.
The results from a checkasm tool are shown below.
hscale_16_to_19__fs_4_dstW_512_c: 6216.0
hscale_16_to_19__fs_4_dstW_512_neon: 2257.0
hscale_16_to_19__fs_8_dstW_512_c: 10417.7
hscale_16_to_19__fs_8_dstW_512_neon: 3112.5
hscale_16_to_19__fs_12_dstW_512_c: 14890.5
hscale_16_to_19__fs_12_dstW_512_neon: 3899.0
hscale_16_to_19__fs_16_dstW_512_c: 19006.5
hscale_16_to_19__fs_16_dstW_512_neon: 5341.2
hscale_16_to_19__fs_32_dstW_512_c: 36629.5
hscale_16_to_19__fs_32_dstW_512_neon: 9502.7
hscale_16_to_19__fs_40_dstW_512_c: 45477.5
hscale_16_to_19__fs_40_dstW_512_neon: 11552.0
(Note, the checkasm tests for these functions haven't been
merged since they fail on x86.)
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Add arm64 neon implementations for hscale 16 to 15 with filter
sizes 4, 8 and X4.
The tests and benchmarks run on AWS Graviton 2 instances.
The results from a checkasm tool are shown below.
hscale_16_to_15__fs_4_dstW_512_c: 6703.5
hscale_16_to_15__fs_4_dstW_512_neon: 2298.0
hscale_16_to_15__fs_8_dstW_512_c: 10983.0
hscale_16_to_15__fs_8_dstW_512_neon: 3216.5
hscale_16_to_15__fs_12_dstW_512_c: 15526.0
hscale_16_to_15__fs_12_dstW_512_neon: 3993.0
hscale_16_to_15__fs_16_dstW_512_c: 20183.5
hscale_16_to_15__fs_16_dstW_512_neon: 5369.7
hscale_16_to_15__fs_32_dstW_512_c: 39315.2
hscale_16_to_15__fs_32_dstW_512_neon: 9511.2
hscale_16_to_15__fs_40_dstW_512_c: 48995.7
hscale_16_to_15__fs_40_dstW_512_neon: 11570.0
(Note, the checkasm tests for these functions haven't been
merged since they fail on x86.)
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Add arm64 neon implementations for hscale 8 to 19 with filter
sizes 4, 4X and 8. Both implementations are based on very similar ones
dedicated to hscale 8 to 15. The major changes refer to saving
the data - instead of writing the result as int16_t it is done
with int32_t.
These functions are heavily inspired on patches provided by J. Swinney
and M. Storsjö for hscale8to15 which were slightly adapted for
hscale8to19.
The tests and benchmarks run on AWS Graviton 2 instances. The results
from a checkasm tool shown below.
hscale_8_to_19__fs_4_dstW_512_c: 5663.2
hscale_8_to_19__fs_4_dstW_512_neon: 1259.7
hscale_8_to_19__fs_8_dstW_512_c: 9306.0
hscale_8_to_19__fs_8_dstW_512_neon: 2020.2
hscale_8_to_19__fs_12_dstW_512_c: 12932.7
hscale_8_to_19__fs_12_dstW_512_neon: 2462.5
hscale_8_to_19__fs_16_dstW_512_c: 16844.2
hscale_8_to_19__fs_16_dstW_512_neon: 4671.2
hscale_8_to_19__fs_32_dstW_512_c: 32803.7
hscale_8_to_19__fs_32_dstW_512_neon: 5474.2
hscale_8_to_19__fs_40_dstW_512_c: 40948.0
hscale_8_to_19__fs_40_dstW_512_neon: 6669.7
Signed-off-by: Hubert Mazur <hum@semihalf.com>
Signed-off-by: Martin Storsjö <martin@martin.st>
Treat the 32 bit stride registers as signed.
Alternatively, we could make the stride arguments ptrdiff_t instead
of int, and changing all of the assembly to operate on these
registers with their full 64 bit width, but that's a much larger
and more intrusive change (and risks missing some operation, which
would clamp the intermediates to 32 bit still).
Fixes: https://trac.ffmpeg.org/ticket/9985
Signed-off-by: Martin Storsjö <martin@martin.st>
The intention here was probably to document this as use of
conditionals does not make sense in a comment.
Fixes doxy warning:
warning: explicit link request to 'if' could not be resolved
Bayer sources are read in groups of 2 lines (e.g. for a
BGGR flavor, the first row contains only B and G samples,
while the second row contains only G and R samples). They
need to be read as a whole.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This is currently 64-bit only because the stack spilling code would not
assemble on RV32I (and it would corrupt s0 and s1 on RV128I, in theory).
This could be added later in the unlikely that someone wants it.
Up until now, libswscale/output.c used a macro to write
an output pixel which involved a call to av_pix_fmt_desc_get()
to find out whether the input pixel format is BE or LE
despite this being known at compile-time (there are templates
per pixfmt). Even worse, these calls are made in a loop,
so that e.g. there are eight calls to av_pix_fmt_desc_get()
for every pixel processed in yuv2rgba64_X_c_template()
for 64bit RGB formats.
This commit modifies these macros to ensure that isBE()
is evaluated at compile-time. This saved 41184B of .text
for me (GCC 11.2, -O3). Of course, it also improved performance.
E.g. ffmpeg_g -f lavfi -i testsrc2,format=yuva420p -pix_fmt rgba64le \
-threads 1 -t 1:00 -f null - (which uses yuv2rgba64le_X_c,
which is an invocation of yuv2rgba64_X_c_template() mentioned above),
performance improved from 95589 to 41387 decicycles for one call
to yuv2packedX; for the be variant the numbers went down from
76087 to 43024 decicycles.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, libswscale/input.c used a macro to read
an input pixel which involved a call to av_pix_fmt_desc_get()
to find out whether the input pixel format is BE or LE
despite this being known at compile-time (there are templates
per pixfmt). Even worse, these calls are made in a loop,
so that e.g. there are six calls to av_pix_fmt_desc_get()
for every pair of UV pixel processed in
rgb64ToUV_half_c_template().
This commit modifies these macros to ensure that isBE()
is evaluated at compile-time. This saved 9743B of .text
for me (GCC 11.2, -O3). For a simple RGB64LE->YUV420P
transformation like
ffmpeg -f lavfi -i haldclutsrc,format=rgba64le -pix_fmt yuv420p \
-threads 1 -t 1:00 -f null -
the amount of decicycles spent in rgb64LEToUV_half_c
(which is created via the template mentioned above)
decreases from 19751 to 5341; for RGBA64BE the number
went down from 11945 to 5393. For shared builds (where
the call to av_pix_fmt_desc_get() is indirect) the old numbers
are 15230 for RGBA64BE and 27502 for RGBA64LE, whereas
the numbers with this patch are indistinguishable from
the numbers from a static build.
Also make the macros that are touched conform to the
usual convention of using uppercase names while just at it.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These macros are definitions, not only declarations and therefore
should not contain a semicolon. Such a semicolon is actually
spec-incompliant, but compilers happen to accept them.
Reviewed-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
As we already have support for VUYA, I figured I should do the small
amount of work to support VUYX as well. That means a little refactoring
to share code.
Fixes FATE-failures with the the filter-2xbr filter-3xbr filter-4xbr
filter-ep2x filter-ep3x filter-hq2x filter-hq3x filter-hq4x
filter-paletteuse-bayer filter-paletteuse-bayer0
filter-paletteuse-nodither and filter-paletteuse-sierra2_4a tests
when using 32bit x86 with CPUFLAGS ranging from "mmx+mmxext" to
"mmx+mmxext+sse+sse2+sse3" (the relevant function is only overwritten
when using SSSE3).
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is by no means perfect, since at least ddagrab will return scRGB
data with values outside of 0.0f to 1.0f for HDR values.
Its primary purpose is to be able to work with the format at all.
Lynne
Jin Bo
Lu Wang
Michael Niedermayer
James Almer
Tomas Härdin
Andreas Rheinhardt
Jeremy Dorfman
Hubert Mazur
Martin Storsjö
Marvin Scholz
Chema Gonzalez
Rémi Denis-Courmont
Hao Chen
Philip Langdale
Timo Rothenpieler