This lets us detect when a container has flagged a stream as multilayer.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Anton Khirnov <anton@khirnov.net>
This allows ending up with a normal, non-fragmented file when
the file is finished, while keeping the file readable if writing
is aborted abruptly at any point. (Normally when writing a
mov/mp4 file, the unfinished file is completely useless unless it
is finished properly.)
This results in a file where the mdat atom contains (and hides)
all the moof atoms that were part of the fragmented file structure
initially.
Signed-off-by: Martin Storsjö <martin@martin.st>
429 and 503 codes can, and often do (e.g. all Google Cloud
Storage URLs can), return a Retry-After header with the error,
indicating how long to wait, asd either a date, or in seconds,
before retrying again. If it is not respected by, for example,
using our default backoff stratetgy instead, chances of success
are very unlikely.
Some references:
* https://datatracker.ietf.org/doc/html/rfc6585
* https://datatracker.ietf.org/doc/html/rfc7231#section-7.1.3
This adds an AVOption to respect that header.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
The existing option only allows users to set the max delay for a
single attempt, rather than the total allowed delay, which is both
pretty unintitive, and only applicable when exponential backoff is
used.
The default for this option is set to 256, which is just above the
effective total delay accomplished by the the existing
reconnect_delay_max default of 120.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Yet another probesize used to get the durations when
estimate_timings_from_pts is required. It is aimed at users interested
in better durations probing for itself, or because using
avformat_find_stream_info indirectly and requiring exact values: for
concatdec for example, especially if streamcopying above it.
The current code is a performance trade-off that can fail to get video
stream durations in a scenario with high bitrates and buffering for
files ending cleanly (as opposed to live captures): the physical gap
between the last video packet and the last audio packet is very high in
such a case.
Default behaviour is unchanged: 250k up to 250k << 6 (step by step).
Setting this new option has two effects:
- override the maximum probesize (currently 250k << 6)
- reduce the number of steps to 1 instead of 6, this is to avoid
detecting the audio "too early" and failing to reach a video packet.
Even if a single audio stream duration is found but not the other
audio/video stream durations, there will be a retry, so at the end the
full user-overriden probesize will be used as expected by the user.
Signed-off-by: Nicolas Gaullier <nicolas.gaullier@cji.paris>
Export each tile as its own stream, and the grid information as a Stream Group
of type TILE_GRID.
This also enables exporting other stream items like thumbnails, which may be
present in non tiled HEIF images too. For those, the primary stream will be
tagged with the default disposition.
Based on a patch by Swaraj Hota
Signed-off-by: James Almer <jamrial@gmail.com>
The existing (and upcoming) available group types are meant to combine several
streams for presentation, with the result being treated as if it was a stream
itself.
For example, a file could export two stream groups of the same type with one of
them as the "default".
Signed-off-by: James Almer <jamrial@gmail.com>
Deprecate AVStream.side_data and its helpers in favor of the AVStream's
codecpar.coded_side_data.
This will considerably simplify the propagation of global side data to decoders
and from encoders. Instead of having to do it inside packets, it will be
available during init().
Global and frame specific side data will therefore be distinct.
Signed-off-by: James Almer <jamrial@gmail.com>
It is of no value to the user, because every muxer can always
be flushed with a NULL packet. As its documentation shows
("If not set, the muxer will not receive a NULL packet in
the write_packet function") it is actually an internal flag
that has been publically exposed because there was no internal
flags field for output formats for a long time. But now there is
and so use it by replacing the public flag with a private one.
Reviewed-by: James Almer <jamrial@gmail.com>
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For badly interleaved files, interleave packets from multiple tracks
at the demuxer level can trigger seeking back and forth, which can be
dramatically slow depending on the protocol. Demuxer level interleave
can be useless sometimes, e.g., reading mp4 via http and then
transcoding/remux to DASH. Disable this option when you don't need the
demuxer level interleave, and want to avoid the IO penalizes.
Co-authored-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
They are currently non-const for reasons unknown, although
avio_write() accepts a const buffer.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This prevents code duplication in the source form by calling the parse
code that was moved to avcodec last commit. The code will be duplicated
in binary form for shared builds (it's not that large), but for source
code it will only exist in one location now.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
Animated JPEG XL files requires a separate demuxer than image2, because
the timebase information is set by the demuxer. Should the timebase of
an animated JPEG XL file be incompatible with the timebase set by the
image2pipe demuxer (usually 1/25 unless set otherwise), rescaling will
fail. Adding a separate demuxer for animated JPEG XL files allows the
timebase to be set correctly.
Signed-off-by: Leo Izen <leo.izen@gmail.com>
VP6 alpha in EA format is a second VP6 encoded video stream where only the Y
component is used and is interpreted as the alpha channel of the first VP6
stream. The alpha VP6 stream is muxed separately from the main VP6 stream, has
its own stream headers and packet headers. In theory the two streams might not
even have the same resolution (although most likely that is not something that
is seen or supported in the wild), but the format is capable of doing it.
Merged VP6 alpha (also known as the VP6A codec) means that a packet of the
video stream contains the corresponding packet of both VP6 substreams like
this:
{OffsetOfAlpha, DataPacket, AlphaDataPacket}
So data and alpha data of a frame is merged to a single packet, this is how VP6
video with alpha is muxed in FLV and SWF.
The first approach is more like how the demuxer sees data in the EA format,
unfortunately it is different to what the FLV or SWF format expects, so -
having no better place for it in the framework - I decided to do an optional
format conversion in the EA demuxer.
Signed-off-by: Marton Balint <cus@passwd.hu>
Add PCR at keyframe can be undesirable when -pcr_period is
specified. Add an flag to disable this behavior.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>
James Almer
Derek Buitenhuis
Martin Storsjö
Nicolas Gaullier
Michael Niedermayer
Andreas Rheinhardt
Paul B Mahol
Zhao Zhili
Leo Izen
jackarain
Marton Balint